Phonic W5 Wireless Speaker System

Wireless audio transmission from any mixer to any speaker!

The Phonic W5 is a stereo audio system kit, which includes a single transmitter unit and 2 stereo receiver modules, able to be connected to any audio input or output. The W5 wireless unit is a state-of-the-art transmitter and receiver kit, able to transfer audio digitally, allowing for encrypted security and with absolutely zero risk of interference, making it ideal for sound contractors and live sound venues where reliability is important.

The Phonic W5 embodies the concept of wireless audio transmission from any mixer to any speaker to effectively eliminate the need of running cables over long distances and worrying about them picking up any noise along the way. They have thrown out the traditional UHF band in favor of a more modern take, which is digital transmission.

Phonic W5 Wireless Speaker System Features:

Starter kit offering one transmitter unit and two receiver units
High Audio Quality through 2.4 GHz Uncompressed PCM Transmission
Varied inputs and outputs, including USB 2.0, optical S/PDIF and RCA
1100mAH Li-ion battery embedded into receiver with a life up to 4 hours
Supports multiport link: one transmitter can link to between 1 and 5 receivers
Transfers audio up to 100 meters
Provides 16-bit audio at sampling rates between 32, 44.1 and 48khz
Easy system link between receiver and transmitter
Wireless Receiver
Type: Digital Wireless Receiver Box unit
Analog Audio Interface: Stereo RCA jacks; L x 1, R x 1
Output Terminals Level/ Impedance: 1.2V/480 ohms
Digital output Terminal: Optical S/PDIF out
Battery life: approx. 3hrs
Battery charge time: Power on stage 5hrs, Power off 2 hrs
Power jack: DC+5V power jack
Wireless Transmitter
Type: Digital Wireless Transmitter Box unit
Analog Audio Interface: Stereo RCA jacks
Input Terminals Level/Impedance: 800mV/ 33K ohms
USB 2.0 Interface: USB mini-B port
USB Audio Format: Linear PCM: 16-bit 32/44.1/48KHz
Power jack: DC+5V power jack
Power button and Indicator:
1. Push and hold this button for 2 seconds to turn the unit on
2. Holding this button down for 5 seconds while the unit turn the unit
off
RF button and Indicator
Push and hold this button in concert with the receiver unit RF button
and a wireless link will be established between the two. The blue
LED indicator below the button will flash briefly and then remain on
to show that a connection has been established.
RF Button: Press down 2 secReceiver Unit