Peavey IPR 3000 Power Amp  

Item #: 
1274228074328
  • Write a Review

Part of Peavey's IPR Series, the IPR 3000 Power Amp uses an advanced design that allowed Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficien... Read More

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Similar Products
Overview

Part of Peavey's IPR Series, the IPR 3000 Power Amp uses an advanced design that allowed Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. The rackmount power amp has a resonant switch-mode power supply and a high-speed class D topology that yields supremely high audio resolution and productivity.

The Peavey IPR 3000 features 2 channels with independent, 100Hz crossovers and produces 440W per channel at 8Î, or 1,490W per channel at 2Î. Peavey's exclusive DDT speaker protection with multipoint clip sampling leads a protection-circuitry suite that also includes DC, Temp, Signal, and Active safeguards, all referenced on the front panel with LED indicators. The power amp also features a variable-speed fan housed in a lightweight aluminum chassis.

Features
  • 2-channel independent fourth-order Linkwitz-Riley crossovers
  • DDT speaker protection with multi-point clip sampling
  • Revolutionary IPR class D topology
  • Detented input controls
  • Combo XLR 1/4" inputs
  • Combo twist-lock output connectors
  • Lightweight aluminum chassis
  • Individual signal-pass 1/4" jacks on each channel
  • LED illuminated
  • Combi 1/4" & XLR inputs
  • Neutrik Speakon combo 1/4" outputs
  • DC, Temp, Signal, and Active safeguards
  • LED indicators
Specifications
  • Rated Power (2 x 2Î): 1,490W per channel @ 1kHz 1% T.H.D. both channels driven
    Rated Power (2 x 4Î): 840W per channel @ 1kHz at <0.1% T.H.D. both channels driven
    Rated Power (2 x 8Î): 440W per channel @ 1kHz at <0.1% T.H.D. both channels driven
    Rated Power (1 x 2Î): 1,640W @ 1kHz at <0.1% T.H.D.
    Rated Power (1 x 4Î): 930W @ 1kHz at <0.1% T.H.D.
    Rated Power (1 x 8Î): 470W @ 1kHz at <0.1% T.H.D.
    Minimum load impedance: 2Î
    Maximum RMS voltage swing: 71 volts
    Frequency response: 20Hz-60kHz;-0.4dB,-3.0dB at 1W
    T.H.D. (2 x 2Î): <0.1% @ 1,350W per channel from 20Hz to 4kHz, decreasing to 1,150W at 20kHz
    T.H.D. (2 x 4Î): <0.1% @ 820W per channel from 20Hz to 20kHz
    T.H.D. (2 x 8Î): <0.1% @ 430W per channel from 20Hz to 20kHz
    Input CMRR: >-76dB @ 1kHz
    Voltage gain: x 75 (+37dB)
    Crossover: 100Hz switchable 2nd order high-pass and 3rd order low-pass per channel
    Crosstalk: >-68dB @ 1kHz at 100W power@ 4Î
    Hum and noise: > -101.5dB, "A" weighted referenced to rated power @ 4Î
    Slew rate: >12V/s
    Damping factor (8Î): >215:1 @ 20Hz-1kHz at 8Î
    Phase response: +23 to -70 from 20Hz to 20kHz
    Input sensitivity: 0.775 volts ± 3% for 1kHz 4Î rated power, 0.730 volts ± 3% for 1kHz, 2Î rated power
    Input impedance: 15kÎ, balanced and 7.5kÎ unbalanced
    Current draw @ 1/8: 917W @2Î,618W @4Î,353W @8Î
    Current draw @ 1/3: 2,016W @ 2Î, 1,236W @ 4Î, 662W @ 8Î
    Cooling: Temperature dependent variable speed 80mm DC fan
    Controls: 2 front-panel attenuators, crossover select switch for H.P.F, Normal, and L.P.F.
    Indicator LEDs: 2 DDT (clip limiting), 2 Signal presence, 2 Active status, 2 Temp, and 2 DC protect
    Protection: Thermal, DC, subsonic, incorrect loads, under and over voltage
    Connectors: Inputs: Dual combination 1/4" XLR, Outputs: Dual 1/4" signal patch, dual 4-pin twist-lock connectors
    Construction: 0.062" thick aluminum
    Dimensions: 3.5" x 19" x 10.5" behind front panel + 0.6" for handle
    Net weight: 3.40kg (7.5lb.*)
    Gross weight: 4.54kg (10lb.)
    Warranty: 5 years
  • Customer Reviews
Loading....

Review Snapshot

by PowerReviews
 
4.7

(based on 3 reviews)

Ratings Distribution

  • 5 Stars

     

    (2)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 3 customers

Displaying reviews 1-3

Back to Top

 
4.0

Satisfied Peavey owner

By Edwin Knott

from San Jose, CA

I wrote a review about the Peavey IPR 3000 on my blog at: http://www.empowernetwork.com/edventurus/blog/peavey-ipr-3000-power-amps/ The complete review is at the blog above. Let me say this. I am very impressed with the Peavey IPR 3000 and would definitely recommend it to anyone. I have to move my equipment often and the weight factor is what is most impressive. This amp weighs about 10 times lighter than comparable amps, and the performance is every bit a good.

Comment on this reviewHelp Icon

(7 of 7 customers found this review helpful)

 
5.0

3000 watts!! only 8 pounds?!

By Eric

from Dallas, Texas

When I first held this amp I thought wow is there anything even inside? Then I went to hook up my 2 15" Earthquake subs and was blown away that they played so loud for such a light amp. It runs the my subs very clean and this thing has never heat up at all not even gotten warm after playing music for hours. Compare to my 65 pound PV 2000 this thing is very light to me and has a bit more power to spare. For $400 (now $450) this thing seem like a great deal and be able to save on time now that I don't carry my as much weight around. One thing though is a week after using it, the amp just went out. The breaker and fuse were fine but it just went out. Luckily GC great service exchange it for me in no time and now has not had problems with the second one. So it was probably a lemon, and it does have 5 year warranty from Peavey just in case anything every happens, which won't.

Comment on this reviewHelp Icon

(10 of 23 customers found this review helpful)

 
5.0

IPR 3000 !!!!!

By musicman330

from balto md

I recieved this amp in june and it really thumps my jbl m-pro 1x18 subs.

Comment on this reviewHelp Icon

Displaying reviews 1-3

Back to Top

You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.