The Peavey 4-way dual 15" speaker that provides clear sound, and great frequency range, in a durable design.

The Peavey SP 6 speaker delivers gigantic sound with precision, accuracy, and long-term reliability. It handles up to 4,000 watts peak power. It is a quasi 4-way system that directs low frequencies to both 15" Black Widow woofers, while limiting mid-range frequencies to the top woofer, and 6.5" professional grade mid-range speaker. An RX 22 titanium driver, that is ferrofluid cooled for maximum tweeter performance, and longevity, handles the upper-mids, and high frequencies.

Innovative upgrades

Peavey's exclusive Quadratic Throat Waveguide technology actually reduces horn distortion and aims sound directly at the audience, not over their heads. Peavey's Sound Guard circuitry offers horn and tweeter protection, and works automatically in either full range, or bi-amp modes. The Apen hardwood plywood enclosure, with extensive internal bracing, improves bass response. The SP 6 is finished in the durable Hammertex material, has heavy-duty handles, powder-coat grille, and rear casters for easy transportation.

Made in the USA.

With our Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!

Peavey SP6 4-Way Dual 15" Speaker Features:

Quasi 4-way full range/bi-ampable sound reinforcement system
RX 22 compression driver with ferrofluid cooling
6.5 inch Pro mid-range with phase plug
Two 15" BWX Black Widow 4" VC woofers with a Kevlar impregnated cone
Patented Quadratic Throat CD Waveguide technology used on mid and tweeter
Aspen hardwood plywood enclosure
Durable Hammertex finish
Patented Radialinear Planar Phase Correction System
Asymmetrical horns aim their coverate patterns 10 degrees upward and 30 degrees downward directing sound to your audience, not over their heads.
Bi-amp capability via internal wiring jumper
Sound Guard III tweeter and mid-range protection
Full-range inputs now include a Neutrik Speakon four-pin jack along with two 1/4" phone jacks
Stand-mount adapter
Made in the USA

Peavey SP6 4-Way Dual 15" Speaker Specifications:

Frequency response, 1 meter on-axis,
swept-sine in anechoic environment:
50 Hz to 15 kHz (ñ3 dB)

Usable low frequency limit
(-10 dB point):
42 Hz

Power handling:

Full range:
1,000W continuous
2,000W program
4,000W peak
Low frequency section:
1,000W continuous
2,000W program
4,000W peak
Passive mid / High frequency section:
150W continuous
300W program
600W peak

Sound pressure level, 1W,
1 meter in anechoic environment:

Full range:
99 dB SPL (2.0 V input)
Low frequency section:
100 dB SPL (2.0 V input)
Mid/high frequency section:
98 dB SPL (2.0 V input)

Maximum sound pressure level
(1 meter):

Full range:
129 dB SPL continuous
135 dB SPL peak
Low frequency section:
130 dB SPL continuous
136 dB SPL peak
Passive mid/high frequency
section:
121 dB SPL continuous
127 dB SPL peak

Radiation angle measured at -6 dB point of polar response:
90ø horizontal by 40ø vertical
The vertical main polar lobe is
angled down 10ø with respect to
straight ahead being +10, -30ø

Transducer complement:

Low frequency section:
2x 15" woofer, vented
1508-8 HE SF
Mid frequency section:
1"x6.5" pro mid-range on an asymmetrical quadratic throat CD horn
High frequency section:
1"x .875" exit /51mm voice coil
RX 22 compression driver
on an asymmetrical Quadratic throat CD horn

Box tuning frequency:
Low Frequency Section: 52 Hz

Crossover frequency
(internal passive):
Bottom woofer: 250 Hz
Low / Mid frequency:
650 Hz
Mid / High frequency:
2100 Hz

Recommended Active Crossover
Frequency Region and Slope:
Low Frequency High Frequency:
500 Hz at 12 dB / octave

Time Offset:
Low Frequency: 0.0 ms
Mid/High Frequency: 0.58 ms

Impedance (Z):
Full Range:
Nominal: 4.0 Ohms
Minimum: 3.5 Ohms
Low Frequency:
Nominal: 4.0 Ohms
Minimum: 3.2 Ohms
Passive HF:
Nominal: 4.0 Ohms
Minimum: 3.7 Ohms

Input connections:
Full Range: two 1/4" phone jacks,
one Neutrik four-pin Speakon jack
& bi-amp capability provided via an
internal wiring jumper

Enclosure materials and finish:
Aspen enclosure
Hammertex finish
Mounting provisions:
This unit is not designed for overhead suspension. It has four large rubber feet on bottom for floor use

Dimensions (H x W x D):
Front:
54.38" x 20.55" x 23.00"
1381 mm x 522 mm x 584 mm
Rear:
54.38" x 12.63" x 23.00"
1381 mm x 321 mm x 584 mm
Net Weight:
141 lbs. (64.0 kg)