[[KeywordSearchInputContent]]

2 days left for delivery by christmas

Item # H90137

Print this page

  1. Select the information you'd like to print out.
  2. Cancel
Peavey PVXp 12 Active PA Loudspeaker
Use Add to Cart below to have it shipped to you, or to a store near you.
Close
  • Store
  • Availability
Guaranteed Lowest Price
Pickup In Store
GC Shopping Cart
 Cart Contents
Qty Description Price Shipping Subtotal 
      Peavey PVXp 12 Active PA Loudspeaker (H90137)
Availability:  


Pickup In Store
GC Shopping Cart
 Cart Contents
Qty Description Price Shipping Subtotal 
      Peavey PVXp 12 Active PA Loudspeaker (H90137)
Availability:  


Lightweight and powerful.

The compact and portable PVXp 12 active (powered) loudspeakers deliver high fidelity and impressive power using Peavey's legendary speaker and power amp technology. The PVXp Series powered enclosures bring 800 watts peak of crystal-clear highs and deep low end, while using exclusive DDT compression technology to maintain clarity throughout the mix. A module bay allows for use of expansion modules to increase the functionality of the enclosures.

Peavey PVX enclosures are constructed with heavy-duty, premium Peavey woofers with 2-3/8-inch voice coils for the lows and low-mids, while the Peavey RX14 1.4-inch titanium diaphragm compression driver, coupled to a constant directivity horn, handles the highs and mid-highs.

Peavey PVX enclosures are housed in a durable, injection-molded enclosure that includes a pole mount, three multi-point flying locations and a tilt-back design to accommodate use as a personal monitor. A black powder-coated steel grille provides driver protection and a clean, professional appearance.

Peavey PVXp 12 Active PA Loudspeaker Features:

  • Two-way 800 watt peak power enclosure
    12" high-performance woofer with 2.3" voice coil
    Multiple cabinet fly points
    Pole-mountable cabinet
    Titanium compression driver
    Expansion module bay
    Angled side for use as monitor when required
    LED signal present and DDT active indicator
    Rugged polypropylene molded enclosure
    Combination 1/4" and XLR input
    Exclusive DDT compression and speaker protection
    XLR and 1/4" through outputs
    Molded in cabinet handles


Peavey PVXp 12 Active PA Loudspeaker Specifications:

  • Frequency Range, 1 meter on-axis, swept-sine in ½ Space environment:
    51 Hz to 20 kHz
    Frequency Response, 1 meter on-axis, swept-sine in anechoic environment:
    60 Hz to 20 kHz (±3 dB)
    Usable Low Frequency limit (-10 dB point anechoic): 55 Hz
    Internal power amplifiers (@120 VAC line):
    Total of 800 watts peak available power
    Woofer - 650 watts peak available power
    Continuous Power: 325 watts @ less than 1% distortion
    Tweeter - 150 watts peak available power
    Continuous Power: 75 watts @ less than 1% distortion.
    Nominal sensitivity (1W @1M, swept sine input in anechoic environment):
    97 dB (average)
    Maximum Sound Pressure Level (1 meter):
    127 dB SPL peak with music
    Radiation Angle measured at -6 dB point of polar response:
    Nominal: 100 degrees horizontal X 50 degrees vertical
    (Axis of the vertical main polar lobe is angled down 10 degrees, resulting in the angular pattern with respect to straight ahead being +15, -35 degrees)
    Transducer Complement:
    Heavy-duty 12” woofer with 2 3/8” voice coil & 50 oz. magnet
    RX™14 1.4” titanium diaphragm dynamic compression driver
    Box Tuning Frequency:
    62 Hz
    Electroacoustic crossover frequency: 2,800 Hz
    Crossover type:
    Internal Electronic two-way crossover with driver EQ, level matching, bass
    boost and subsonic filtering.
    Crossover Slopes:
    12 dB/octave (2nd order) low pass, 24dB/octave (fourth order) high pass,
    both with staggered poles and driver EQ.
    Input Connections:
    One combo female XLR/ 1/4" phone jack providing balanced line-level operation, with switch-selectable mic- or line-level sensitivity.
    Output Connections:
    One male XLR and one 1 /.4” phone jack. The Thru jacks are intended for the use of linking multiple PVx™12D‘s in a line or to provide a feed to a powered subwoofer, or other electronics that needs to receive a full range version of the input signal.
    Enclosure Materials & Finish:
    Black ABS plastic with textured surface, black powder-coated perforated grille.
    Also available in white.
    Mounting provisions:
    Unit has two sets of two M10 inserts, one pair on the top, and one pair on the bottom.
    Additional mounting points are a set of four M8 inserts on the top, and a set of four on the right side in the handle recess, and a set of four on the bottom, which use the Peavey VersaMount 70+ mounting bracket.
    Four rubber feet provide vibration free floor or stage use, and a molded-in stand mounting cup is on the bottom.
    Dimensions (H x W x D):
    Front:
    24.50 in. x 16.10 in. x 15.00 in.
    Rear:
    22.75 in. x 8.75 in. x 15.00 in.
    Net Weight:
    43 Lbs. (19.5 kg)


Voice your opinion! Be the first to review »
Questions about the PVXp 12 Active PA Loudspeaker (H90137)


To: GuitarCenter.com
PO Box 4769
Westlake Village, CA 91359
USA
866-498-7882
 
Order #: (if applicable)  * Denotes Required Field
*First Name:
*Last Name:
*Email:
Phone:
*Subject:
*Message:
Click to add file attachment
File Upload 5mb limit