Accidental damage, normalNormal wear and power surges are no longer an issue with these comprehensive and affordable plans. We even pay to ship your gear for repairs. More details.
Covers much more than the original manufacturer's warranty:
Damage due to unexpected and unintentional spills, drops and impacts
Damage due to normal wear and tear
Damage caused by lightning/power surge
Damage due to dust, internal heat, humidity, heavy usage
No Lemon Policy on merchandise over $200- if it fails for the same reason 3 times, it is replaced on the 4th breakdown
Complete refund in the event of failure or substandard performance on merchandise under $200 (Gift Certificate sent for the full price plus applicable sales tax paid)
Manufacturer's Specs Coverage -- The product does not need to fail to be covered. If the product does not perform as it did the first day you bought it, we will repair or replace it so that it does
Free shipping to and from repair facility
Plans are transferable in the event merchandise is sold
Limit of Liability: The least of the cost of (1) authorized repairs, (2) replacement with a product of similar features, (3) reimbursement for authorized repairs or replacement or (4) the price that you paid for the product.
*Limitations and exclusions apply. See terms and conditions for program details
The Peavey PV 10/Harbinger APS12 PA Package includes the Peavey PV 10 mixer with 6 mono/2 stereo channels and effects; 2x12", 150W Harbinger APS12 2-way powered loudspeakers; 2 Audio-Technica M4000s dynamic mics; and 4 mic cables.
Peavey PV 10 mixer The PV 10 compact mixer offers value and easy-to-use features. Reference-quality mic preamps with an astonishingly low 0.0007% THD make the PV 10 mixer excellent for live sound or project studio recording. The PV 10 mixer includes three-band EQ, effects send and monitor send on each channel. With six mono and two stereo channels, the PV 10 offers a total of eight inputs. The master section includes 48 volt phantom power, built-in digital effects, effects send and return, assignable tape input and a unique master contour EQ that helps sweeten the mix. Dual XLR and 1/4 inch outputs allow the PV 10 to easily connect with other equipment. Sleek metal design adds strength, durability and looks like no other mixer in its class. Rackmount kit available.
Harbinger APS12 12" Powered Speaker The 150W Harbinger APS12 is a 12", 2-way, powered PA speaker system with full-range response that makes it ideal for vocals and acoustic performances. The Harbinger APS12 is equipped with a 12" woofer with a 1-3/8" compression driver, 3-channel mic/line mixer, 2 mic/line input channels with individual balanced and unbalanced connections, 1 dual RCA/single XLR line input for playback devices, and much more.
Audio-Technica M4000s Dynamic Microphone The handheld Audio-Technica M4000S dynamic microphone combines professional features with a ridiculously affordable price tag. Audio-Technica tailors the M4000S mic's frequency response for crystal-clear vocal reproduction. Great feedback rejection and focused pickup are due to the A-T microphone's unidirectional polar pattern. The M4000S Audio-Technica mic also is equipped with a handy On/Off switch for convenience.
Audio-Technica professional microphone enhancements include a balanced XLR output, and a mic clip. Whether you're on the road, in the studio, or just performing at local gigs. Expect the all-metal Audio-Technica M4000S microphone to provide you with years of trouble-free use.
Peavey PV10 / Harbinger APS12 PA Package
Features:
Peavey PV 10 mixer Built-in DSP effects processor 6 RQ reference-quality, low-noise mic inputs with insert points Channels 7 and 8 with dual switchable stereo line inputs 3-band EQ on all channels LED clip, signal, and mute indication 1 pre-fader monitor send 1 post-fader effects send Precision 60mm faders on input channels and stereo master outputs Control room output Global 48V phantom power Tape to control room and tape to mix assignments Stereo outputs with 1/4" unbalanced and XLR Rugged console design Universal switching power supply
Harbinger APS12 12" Powered Speaker 2-way, full-range powered speaker with 12" woofer and a 1-3/8" compression driver 150W RMS, convection-cooled, Class A/B amplifier 3-channel mic/line mixer 2 mic/line input channels with individual balanced and unbalanced connections 1 dual RCA/Single XLR line input for playback devices such as MP3, CD players, and more 5-band graphic EQ Individual balanced and unbalanced line outputs for connecting other powered speakers Built-in stand mount LED clip Indicator
Audio-Technica M4000s Dynamic Microphone Frequency response tailored for crystal-clear vocal reproduction Unidirectional pattern for feedback rejection and focused pick up All-metal design for years of trouble-free use Convenient on/off switch Professional features include balanced XLR output and mic clip
Peavey PV10 / Harbinger APS12 PA Package
Specifications:
Peavey PV 10 mixer
Gain
Mic Input Gain Adjustment Range: 10 dB to 60 dB
Mic Input to Left/Right Balance Output: 88 dB (max gain)
Line Input Gain Adjustment Range: -10 dB to 40 dB
Line Input to Left/Right Balance Output: 60 dB (max gain)
Stereo Line Input Gain Adjustment Range: Off to +20 dB
Stereo Line Input to Left/Right Output: 40 dB (max gain)
Frequency Response (Mic Input to Left/Right Output): 14 Hz to 25 kHz +0 dB/-1 dB
Total Harmonic Distortion
<0.02% 20 Hz to 20 kHz Mic to Left/Right Output (10 Hz to 80 kHz BW)
Common Mode Rejection Ratio (Mic Input): 50 dB minimum (20 Hz to 20 kHz) 70 dB typical @ 1 kHz Meters: 8 segment, peak reading (0 dB = +4 dBu) Signal/Overload Indicators: Red LED lights 3 dB below clipping Dimensions: 12.125" wide x 14.75" deep x 3.5" high (30.80cm x 37.47cm x 8.89cm) Weight: 9.3 lbs. (4.22 kg) Power Requirements: 100-240 VAC 50/60 Hz 13 Watts
Harbinger APS12 12" Powered Speaker Frequency response (-3dB): 45Hz-20kHz Frequency Range (-6dB): 40Hz-20kHz Max SPL Long-term@1m: 97dB Max SPL Peak@1m: 119dB Crossover: 18dB/oct@3.6kHz (passive)
Power Amplifer Rated Output Power: 135W Max Output Power: 150W Power Supply: 110V/120V 50/60Hz Max Power Consumption: 207VA Rated THD: <0.5%(20Hz-20kHz) Frequency response: +1/-2dB (20Hz-20kHz) Cooling: Convection Extrusion Design: ClassA/B Dimensions (H x W x D): 25.2"x 16.2"x 13" Weight 35.9lb.
Audio-Technica M4000s Dynamic Microphone Element: Moving coil dynamic Polar pattern: Unidirectional Frequency response: 70Hz — 12.000Hz Open circuit sensitivity: -52dB (2.5 mV) Impedance: 500 Ohms Switch: On/off Weight: 329 grams (11.6 oz.) Dimensions: 178.3mm (7.02") length, 56.3mm (2.22") body diameter Output Connector: Integral 3-pin XLR M-type Accessories: Slip-in stand clamp for 5/8" — 27 threaded adaptor
Mixer is good all around. Speakers are a bit dead on the low end (bass). Good system for small areas or for just having fun. Wouldn't use them in a "real" setting: club, vocal,dj.
Over all good for the cheap price though!!!!
I must first start by saying that I have used various small PAs over the last 20 years. So I compare this to a number of 8 channel or smaller mixers both powered and unpowered.
I must admit I was a bit shocked shocked when I received this system. The mixer is small. I think it's only about 15'x15'. In my limited experience with PA systems I have never seen one this small. But don't let that fool you. It does everything that I would expect from an 6/8 channel mixer.
The knobs and sockets are good and solid. While it is small and light it certainly doesn't feel cheap. I'm actually impressed with the quality of materials and construction. Thumbs up to Peavey on that.
The is a small but efficient EQ section for each of the six channels, as well as the two stereo channels. The last two would probably be used for DJ equipment I would guess. I have no use for them right now.
The onboard effects are limited but you get a decent enough reverb/chorus. The delay is really kind of cheesy sounding, but let's be honest. If you want a good delay you need to buy a vocal processor. Anything built in will always be somewhat limited. I give them 4/5 for giving us some effects.
The output section give you the option of using XLR or 1/4 for your speakers. With the package you get XLR cables so that it what I have used. No issues here, but I like that it does both.
The included speakers are really pretty nice. While not the loudest or super bass, they work well. Good lows without being muddy. Good highs without being thin. Good mids without being overwhelming. I haven't messed with the onboard EQs or other inputs. So I really can't comment there. But I assume it will do what you need them to.
The microphones are good, not great, but good. If you want great then buy some SM58s. Not sense in complaining about what comes with it.
Overall, it is what it is. A good small PA for vocals in a band or as a live DJ system. Can you run all of your stuff through it? No. There are not enough inputs and I don't think the sound out of those speakers would work real well. That's not what they are designed for. If you need a full sound reinforcement system for live audio, then look at the packages for that. If you need some vocals for a band, this will more than fill the ticket. Best of all, when we buy our live rig, we can still use the mixer and speakers as a monitor system. So it's not a cheap throw away system.
Great package GC.
3
of
4
people found this review helpful.
Was this review helpful?
Thank You for rating this review!
You must be logged in to write a review. Please click here to login.
Browse similar items:
Product Details
Customer reviews
Price
You are currently viewing the Printable Version of this page. Click here to return
to the Regular Version.
866-498-7882
Available in Stores
For your convenience, our online inventory has been expanded to include items in
our retail locations. Some items may be fulfilled from Guitar Center retail stores*.
Items will be inspected to ensure the store has the product you want, in the condition
you expect. If not, a store manager will contact you by phone or email within one
hour.
*Select items are available for in store pick-up only
(Based on 
Based on 
