Powerful 15" loudspeakers with cables and stands to get you hooked up.
This package includes a pair of PR 15D loudspeakers with a pair of LiveWire TRS-TRS balanced patch cables (see# 330496), and 2 Musician's Gear speaker stands (see # 451036)
PR 15D Loudspeakers
The PR 15D packs power and full-range sound quality into one compact loudspeaker. This 2-way powered system contains 270W of bi-amped power. A separate amplifier for each speaker provides crystal clear sound even at very high levels. 200W powers the heavy-duty 15" woofer and 70W are dedicated to the RX 14 compression driver. Both amplifiers feature DDT compression, which virtually eliminates audible power amplifier clipping.
The enclosure utilizes tough polypropylene in an injection-molded plastic trapezoidal form, with a coated steel grille to offer an eye-pleasing yet durable powered speaker system. The PR 15D has a built-in three-channel mixer with individual level controls for XLR or 1/4 inch connections. Molded-in handles provide ease of transport while multiple mounting points for pole stand and Peavey Versamount brackets make it perfect for installs.
The Peavey PR 15D has a variety of applications such as sound reinforcement, public address, side fill system, karaoke, or musical playback. It also makes an excellent stage monitor and can be easily added to an existing sound system.
With our
Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!
Peavey PR 15D Speaker Pair with Stands and Cables Features:
- Bi-amplified powered system with 270 watts maximum output
Both power amps have DDT compression
15" woofer with 2.375" VC with lightweight neodymium magnet
RX14 1.4" titanium compression driver
Peak SPL up to 120 dB with music
Combo jack with 1/4" TRS and Female XLR mic or line-level balanced input
Two 1/4" phone jack inputs with concentric level controls
Input mixing built-in
Molded-in horn has exceptionally smooth response and pattern control
Top and sides handgrips
Pole mount molded-in
Top and bottom flying point insert
Light weight Neodymium woofer
Peavey PR 15D Speaker Pair with Stands and Cables Specifications:
- Frequency Response, 1 meter on-axis, swept-sine in anechoic environment: 47Hz to 20kHz (±3 dB)
Usable Low Frequency Limit (-3dB point): 47Hz
Internal Power Amplifiers (@120 VAC line):
Woofer — 200 Watts peak dynamic power
140 watts @ less than 0.1% distortion
Tweeter — 70 Watts peak dynamic power
50 Watts @ less than 0.1% distortion
Nominal Sensitivity (1W @ 1M, swept sine input in anechoic environment): 97dB
Maximum Sound Pressure Level: 120dB music peak
Nominal Radiation Angles: 90 degrees horizontal by 40 degrees vertical
Transducer Complement
12" heavy duty woofer, and RX14 1.4" titanium diaphragm compression driver
Box Tuning Frequency (Fbox): 55Hz
Electroacoustic Crossover Frequency: 2000 Hz
Crossover type: Internal Electronic 2-way crossover with CD horn EQ, level matching, bass boost and subsonic filtering.
Crossover slopes: 18dB/octave (third order) low pass, 18dB/octave (third order) high pass, both with staggered poles and driver EQ. Unit has horn spatially aligned with woofer, so there is no need for phase alignment or time delay of the signals.
Electronic Input Impedance (Nominal): 10k Ohms unbalanced, 20 K Ohms balanced line level, 2.4 k Ohms balanced mic level.
Input Connections
One combo female XLR/1/4" phone jack providing balanced operation, with switch selectable mic or line level sensitivity. Also has two 1/4" phone jack line level unbalanced inputs with concentric pair of level controls.
Enclosure Materials & Finish: Injection-molded polypropylene of a nominal thickness of 1/4" with internal ribbing and bracing, and with textured finish. Molded material is dark gray.
Mounting: Subwoofer pole-mounting via molded-in mount, flying via Versamount 70 and four rubber feet for floor use.
Optional: Impulse 200 Floor Monitor Kit (FG# 00370480)
Dimensions 28-1/2" (72.5 cm) tall by 21-5/16" (54.1 cm) wide {11-1/2"/29.2 cm in rear} by 17" (43.2 cm) deep
Net Weight: 52 lb. (21.8 kg)
Electronics and Amplifier Specifications
Electronic Input Impedance (Nominal): Primary balanced input: 20k ohm line level sensitivity selected, 2.4k ohm mic level sensitivity selected, 10k ohm unbalanced 1/4".
Mic Switch Sensitivity Increase: 30dB
Infrasonic filter protection: 36dB/octave roll-off
Nominal Amplifier Frequency Response: +0, -1dB from 10Hz to 30kHz
Hum and Noise: Greater than 90dB below rater power
DDT Dynamic Range: Greater than 14dB
THD and IM: Typically less than 0.1%
Damping Factor: Greater than 100 @ 1000 Hz, 8 ohm
Power requirements of Peavey PR 12PD System (domestic): Nominal 100 Watts, 120 VAC, 60Hz
