An efficient combination of power and value.

View all items from this brand

The PR 15D packs power and full-range sound quality into one compact loudspeaker. This 2-way powered system contains 270W of bi-amped power. A separate amplifier for each speaker provides crystal clear sound even at very high levels. 200W powers the heavy-duty 15" woofer and 70W are dedicated to the RX 14 compression driver. Both amplifiers feature DDT compression, which virtually eliminates audible power amplifier clipping. The enclosure utilizes tough polypropylene in an injection-molded plastic trapezoidal form, with a coated steel grille to offer an eye-pleasing yet durable powered speaker system. The PR 15D has a built-in three-channel mixer with individual level controls for XLR or 1/4 inch connections. Molded-in handles provide ease of transport while multiple mounting points for pole stand and Peavey Versamount brackets make it perfect for installs. The Peavey PR 15D has a variety of applications such as sound reinforcement, public address, side fill system, karaoke, or musical playback. It also makes an excellent stage monitor and can be easily added to an existing sound system.

With our Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!

Peavey PR 15D 15" Active Speaker Features:

Bi-amplified powered system with 270 watts maximum outputBoth power amps have DDT compression15" woofer with 2.375" VC with lightweight neodymium magnetRX14 1.4" titanium compression driverPeak SPL up to 120 dB with musicCombo jack with 1/4" TRS and Female XLR mic or line-level balanced inputTwo 1/4" phone jack inputs with concentric level controlsInput mixing built-inMolded-in horn has exceptionally smooth response and pattern controlTop and sides handgripsPole mount molded-inTop and bottom flying point insertLight weight Neodymium woofer

Peavey PR 15D 15" Active Speaker Specifications:

Frequency Response, 1 meter on-axis, swept-sine in anechoic environment: 47Hz to 20kHz (±3 dB)Usable Low Frequency Limit (-3dB point): 47Hz Internal Power Amplifiers (@120 VAC line):Woofer — 200 Watts peak dynamic power140 watts @ less than 0.1% distortionTweeter — 70 Watts peak dynamic power50 Watts @ less than 0.1% distortionNominal Sensitivity (1W @ 1M, swept sine input in anechoic environment): 97dBMaximum Sound Pressure Level: 120dB music peakNominal Radiation Angles: 90 degrees horizontal by 40 degrees verticalTransducer Complement12" heavy duty woofer, and RX14 1.4" titanium diaphragm compression driver Box Tuning Frequency (Fbox): 55HzElectroacoustic Crossover Frequency: 2000 HzCrossover type: Internal Electronic 2-way crossover with CD horn EQ, level matching, bass boost and subsonic filtering.Crossover slopes: 18dB/octave (third order) low pass, 18dB/octave (third order) high pass, both with staggered poles and driver EQ. Unit has horn spatially aligned with woofer, so there is no need for phase alignment or time delay of the signals.Electronic Input Impedance (Nominal): 10k Ohms unbalanced, 20 K Ohms balanced line level, 2.4 k Ohms balanced mic level. Input ConnectionsOne combo female XLR/1/4" phone jack providing balanced operation, with switch selectable mic or line level sensitivity. Also has two 1/4" phone jack line level unbalanced inputs with concentric pair of level controls.Enclosure Materials & Finish: Injection-molded polypropylene of a nominal thickness of 1/4" with internal ribbing and bracing, and with textured finish. Molded material is dark gray.Mounting: Subwoofer pole-mounting via molded-in mount, flying via Versamount 70 and four rubber feet for floor use.Optional: Impulse 200 Floor Monitor Kit (FG# 00370480) Dimensions 28-1/2" (72.5 cm) tall by 21-5/16" (54.1 cm) wide {11-1/2"/29.2 cm in rear} by 17" (43.2 cm) deepNet Weight: 52 lb. (21.8 kg)Electronics and Amplifier SpecificationsElectronic Input Impedance (Nominal): Primary balanced input: 20k ohm line level sensitivity selected, 2.4k ohm mic level sensitivity selected, 10k ohm unbalanced 1/4".Mic Switch Sensitivity Increase: 30dBInfrasonic filter protection: 36dB/octave roll-offNominal Amplifier Frequency Response: +0, -1dB from 10Hz to 30kHzHum and Noise: Greater than 90dB below rater powerDDT Dynamic Range: Greater than 14dBTHD and IM: Typically less than 0.1%Damping Factor: Greater than 100 @ 1000 Hz, 8 ohmPower requirements of Peavey PR 12PD System (domestic): Nominal 100 Watts, 120 VAC, 60Hz