2-channel power amp delivers 840W at 4O, 1,490W at 2O per channel.
Part of Peavey's IPR Series, the IPR 3000 Power Amp uses an advanced design that allowed Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. The rackmount power amp has a resonant switch-mode power supply and a high-speed class D topology that yields supremely high audio resolution and productivity.
The Peavey IPR 3000 features 2 channels with independent, 100Hz crossovers and produces 440W per channel at 8O, or 1,490W per channel at 2O. Peavey's exclusive DDT speaker protection with multipoint clip sampling leads a protection-circuitry suite that also includes DC, Temp, Signal, and Active safeguards, all referenced on the front panel with LED indicators. The power amp also features a variable-speed fan housed in a lightweight aluminum chassis.
With our
Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!
Peavey IPR 3000 Power Amp Features:
- 2-channel independent fourth-order Linkwitz-Riley crossovers
DDT speaker protection with multi-point clip sampling
Revolutionary IPR class D topology
Detented input controls
Combo XLR 1/4" inputs
Combo twist-lock output connectors
Lightweight aluminum chassis
Individual signal-pass 1/4" jacks on each channel
LED illuminated
Combi 1/4" & XLR inputs
Neutrik Speakon combo 1/4" outputs
DC, Temp, Signal, and Active safeguards
LED indicators
Variable-speed fan
Peavey IPR 3000 Power Amp Specifications:
- Rated Power (2 x 2O): 1,490W per channel @ 1kHz 1% T.H.D. both channels driven
Rated Power (2 x 4O): 840W per channel @ 1kHz at <0.1% T.H.D. both channels driven
Rated Power (2 x 8O): 440W per channel @ 1kHz at <0.1% T.H.D. both channels driven
Rated Power (1 x 2O): 1,640W @ 1kHz at <0.1% T.H.D.
Rated Power (1 x 4O): 930W @ 1kHz at <0.1% T.H.D.
Rated Power (1 x 8O): 470W @ 1kHz at <0.1% T.H.D.
Minimum load impedance: 2O
Maximum RMS voltage swing: 71 volts
Frequency response: 20Hz-60kHz;-0.4dB,-3.0dB at 1W
T.H.D. (2 x 2O): <0.1% @ 1,350W per channel from 20Hz to 4kHz, decreasing to 1,150W at 20kHz
T.H.D. (2 x 4O): <0.1% @ 820W per channel from 20Hz to 20kHz
T.H.D. (2 x 8O): <0.1% @ 430W per channel from 20Hz to 20kHz
Input CMRR: >-76dB @ 1kHz
Voltage gain: x 75 (+37dB)
Crossover: 100Hz switchable 2nd order high-pass and 3rd order low-pass per channel
Crosstalk: >-68dB @ 1kHz at 100W power@ 4O
Hum and noise: > -101.5dB, "A" weighted referenced to rated power @ 4O
Slew rate: >12V/µs
Damping factor (8O): >215:1 @ 20Hz-1kHz at 8O
Phase response: +23 to -70° from 20Hz to 20kHz
Input sensitivity: 0.775 volts ± 3% for 1kHz 4O rated power, 0.730 volts ± 3% for 1kHz, 2O rated power
Input impedance: 15kO, balanced and 7.5kO unbalanced
Current draw @ 1/8: 917W @2O,618W @4O,353W @8O
Current draw @ 1/3: 2,016W @ 2O, 1,236W @ 4O, 662W @ 8O
Cooling: Temperature dependent variable speed 80mm DC fan
Controls: 2 front-panel attenuators, crossover select switch for H.P.F, Normal, and L.P.F.
Indicator LEDs: 2 DDT (clip limiting), 2 Signal presence, 2 Active status, 2 Temp, and 2 DC protect
Protection: Thermal, DC, subsonic, incorrect loads, under and over voltage
Connectors: Inputs: Dual combination 1/4" XLR, Outputs: Dual 1/4" signal patch, dual 4-pin twist-lock connectors
Construction: 0.062" thick aluminum
Dimensions: 3.5" x 19" x 10.5" behind front panel + 0.6" for handle
Net weight: 3.40kg (7.5lb.*)
Gross weight: 4.54kg (10lb.)
Warranty: 5 years
(Based on 
Based on 
