Good sound in a rugged turntable cartridge.
The Ortofon Scratch was designed together with DJ's for scratch and back cueing. The rubber suspension is especially developed for scratch and back cueing. This turntable cartridge uses a spherical diamond and achieves a high output (7.0 mV).Several Ortofon technologies make it possible to realize high sound quality and low record wear at the high tracking forces that are necessary in disco environments. DJ's all over the world claim very high demands to their DJ professional equipment, among which the cartridges plays their decisive part by realizing that scratching, back-cueing, and live artistic performance are a big part of the show. Reliability and robustness is vital, when these replacement cartridges night after night will have to withstand these demands in environments with extreme sound pressure and vibration.Scratching and back-cueing impose heavy mechanical stress on the cantilever and its rubber bearing. Therefore, the Ortofon cartridges are equipped with cantilevers made from aluminum tube with increased wall thickness. Special attention has also been paid to the attachment of the bearing and the design of the bearing itself. This means that rough treatment will neither damage the Ortofon cartridge nor degrade its stability.For easier cueing, the nose of all the Ortofon cartridges have an extra large cutout which makes the stylus freely visible from above, and further, the tip of the cantilever is fluorescent.
With our Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!
Ortofon Scratch Twin Pack Turntable Cartridge Features:
Ortofon Scratch Twin Pack Turntable Cartridge Specifications:
- Output voltage at 1000 Hz, 5cm/sec.: 7 mVChannel balance at 1 kHz: 1,5 dBChannel separation at 1 kHz: 25 dBChannel separation at 15 kHz: 15 dBFrequency range: 20-20.000 HzFrequency response: 20-15.000 Hz + 3 / - 2 dBFIM distortion at recommended tracking force, DIN 45.542: < 1%Tracking ability at 315Hz at recommended tracking force: 80µmCompliance, dynamic, lateral: 6µm / mNStylus type: SphericalStylus tip radius: R 18µmEquivalent stylus tip mass: 0,6 mgTracking force range: 3,0-5,0 g (30-50 mN)Tracking force, recommended: 4,0 g (40 mN)Tracking angle: 20°Internal impedance, DC resistance: 750 OhmInternal inductance: 450 mHRecommended load resistance: 47 kOhmRecommended load capacitance: 200-600 pFCartridge colour, body/stylus: Neon red / Neon redCartridge weight: 18,5 gReplacement stylus unit: Scratch
Ortofon Scratch Twin Pack Turntable Cartridge
One year warranty for factory defects. Does not cover damage, misuse, or wear.
Warranty terms vary. Check with manufacturer for specific product warranty.
Get your gear covered!
Now you can get added warranty protection for your new gear. Pro Coverage steps
in where the manufacturer's "normal wear and tear" ends. Our PRO COVERAGE program
offers you UPGRADED COVERAGE if your product ever fails!
Pro Coverage includes:
- Accidental damage protection (new gear only)
- Expedited Repair
- Free Shipping (for returns or repairs)
- 100% Coverage for Commercial Use
- Extended Return Period
- Extended Price Protection
- No Lemon Guarantee
- Free Transfer of Coverage to a new owner
- Repair Costs Covered for up to 3 years from date of purchase
- Repairs Can Be Authorized Toll-Free by Phone or the via the web
(Based on 1
reviews)
Searching serial numbers
