The first cartridges to combine the unrivalled Ortofon sound quality with the ruggedness that is a must for professional use.
The Ortofon Pro S Concorde is a good start-up cartridge for all-around purposes, mounted with a spherical diamond. Achieves an output of 5.0 mV.
Several Ortofon technologies make it possible to get high sound quality and low record wear at the high tracking forces that are necessary in disco environments. DJs all over the world claim very high demands to their professional DJ equipment, among which the turntable cartridges play their decisive part by realizing that scratching, back-cueing, and live artistic performance are a big part of the show. Reliability and robustness is vital, when the cartridges night after night have to withstand these demands in environments with extreme sound pressure and vibration.
Scratching and back-cueing impose heavy mechanical stress on the cantilever and its rubber bearing. Therefore, the Ortofon cartridges are equipped with cantilevers made from aluminum tube with increased wall thickness. Special attention has also been paid to the attachment of the bearing and the design of the bearing itself. This means that rough treatment will neither damage this replacement turntable cartridge nor degrade its stability.
With our
Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!
Ortofon Pro S Concorde Turntable Cartridge Twin Pack Features:
Ortofon Pro S Concorde Turntable Cartridge Twin Pack Specifications:
- Output voltage at 1000 Hz, 5cm/sec.: 5 mV
Channel balance at 1 kHz: 2 dB
Channel separation at 1 kHz: 20 dB
Channel separation at 15 kHz: 15 dB
Frequency range: 20-20.000 Hz
Frequency response: 20-18.000 Hz + 3 / - 2 dB
FIM distortion at recommended tracking force, DIN 45.542: < 1%
Tracking ability at 315Hz at recommended tracking force: 70 µm
Compliance, dynamic, lateral: 7 µm/mN
Stylus type: Spherical
Stylus tip radius: R 26 µm
Equivalent stylus tip mass: 0,5 mg
Tracking force range: 3,0-5,0 g (30-50 mN)
Tracking force, recommended: 4,0 g (40 mN)
Tracking angle: 20°
Internal impedance, DC resistance: 750 Ohm
Internal inductance: 450 mH
Recommended load resistance: 47 kOhm
Recommended load capacitance: 200-600 pF
Cartridge colour, body/stylus: Black/Black
Cartridge weight: 18,5 g
Replacement stylus unit: PRO S
Ortofon Pro S Concorde Turntable Cartridge Twin Pack
One year warranty for factory defects. Does not cover damage, misuse, or wear.
Warranty terms vary. Check with manufacturer for specific product warranty.
Get your gear covered!
Now you can get added warranty protection for your new gear. Pro Coverage steps
in where the manufacturer's "normal wear and tear" ends. Our PRO COVERAGE program
offers you UPGRADED COVERAGE if your product ever fails!
Pro Coverage includes:
- Accidental damage protection (new gear only)
- Expedited Repair
- Free Shipping (for returns or repairs)
- 100% Coverage for Commercial Use
- Extended Return Period
- Extended Price Protection
- No Lemon Guarantee
- Free Transfer of Coverage to a new owner
- Repair Costs Covered for up to 3 years from date of purchase
- Repairs Can Be Authorized Toll-Free by Phone or the via the web
(Based on 
Based on 
