DigitalPianistSynths
Call 866‑388‑4445 or chat for exclusive deals, plus save on orders of $199+
Open Box Roland SCOOPER Modular Scatter Level 1
(0)|Q&A|Item #:J22753004000000
Condition: Open Box - Like New
Need Help?
Description
One of the newer signal processors to garner widespread popularity is the looper. The obvious question was, where will the looper go from here? The SCOOPER is one answer to that question. Roland has always been at the forefront of cutting edge effects processing technology, and the SCOOPER is another example of this research focus. The SCOOPER is essentially a single-pass looper whose output scheme is modified by a Scatter function combined with time, pitch and filter processing.
SCOOPER is an ultra-modern effect that can sample, mangle, degrade and glitch captured loops of incoming audio. After capturing an audio loop, you can use SCOOPER to adjust the loop' pitch as well as process it through a filter section and various Scatter types that slice and warp individual steps. Using the large comfortable controls or standard 1/8" patch cables, you can independently control the Scatter type and depth, pitch, filter, sync trigger and Scatter on/off toggle. Both the Scatter Depth and Scatter Type parameters have input level controls for adjusting the modulation range when controlled from an external source. Two inputs and two outputs make SCOOPER a stereo-capable, 24bit/96kHz audio interface for Eurorack systems, and AIRA Link USB compatibility gives it single-cable, plug and play connectivity with the MX-1 Mix Performer.
Reprogrammable via Mac, PC, iOS, Android application
While it sounds great out of the box, you can fully customize SCOOPER' internal signal path by re-patching its array of virtual sub-modules via a custom application that works on Mac and PC as well as iOS and Android devices. Submodules are re-patched through a simple and intuitive drag and drop interface that even lets you choose which parameters are assigned to the high-resolution œGRF knobs. You can reprogram SCOOPER in realtime via USB connection or save and recall patches with a simple audio signal. You can even share patches with other SCOOPER users. While it sounds great out of the box, you can fully customize SCOOPER' internal signal path by re-patching its array of virtual sub-modules via a custom application that works on Mac and PC as well as iOS and Android devices. Submodules are re-patched through a simple and intuitive drag and drop interface that even lets you choose which parameters are assigned to the high-resolution œGRF knobs. You can reprogram SCOOPER in realtime via USB connection or save and recall patches with a simple audio signal. You can even share patches with other SCOOPER users.
Parameter and effects control
LFO, ADSR, Noise, Sample & Hold, Ring Mod, Filter 6db, Filter 12db, Tone, Amp, Mixer, Stereo Mixer, Curve Conv, Gate Divider, Trig To CV Delay Time, MIDI Clock to Gate
SCOOPER is an ultra-modern effect that can sample, mangle, degrade and glitch captured loops of incoming audio. After capturing an audio loop, you can use SCOOPER to adjust the loop' pitch as well as process it through a filter section and various Scatter types that slice and warp individual steps. Using the large comfortable controls or standard 1/8" patch cables, you can independently control the Scatter type and depth, pitch, filter, sync trigger and Scatter on/off toggle. Both the Scatter Depth and Scatter Type parameters have input level controls for adjusting the modulation range when controlled from an external source. Two inputs and two outputs make SCOOPER a stereo-capable, 24bit/96kHz audio interface for Eurorack systems, and AIRA Link USB compatibility gives it single-cable, plug and play connectivity with the MX-1 Mix Performer.
Reprogrammable via Mac, PC, iOS, Android application
While it sounds great out of the box, you can fully customize SCOOPER' internal signal path by re-patching its array of virtual sub-modules via a custom application that works on Mac and PC as well as iOS and Android devices. Submodules are re-patched through a simple and intuitive drag and drop interface that even lets you choose which parameters are assigned to the high-resolution œGRF knobs. You can reprogram SCOOPER in realtime via USB connection or save and recall patches with a simple audio signal. You can even share patches with other SCOOPER users. While it sounds great out of the box, you can fully customize SCOOPER' internal signal path by re-patching its array of virtual sub-modules via a custom application that works on Mac and PC as well as iOS and Android devices. Submodules are re-patched through a simple and intuitive drag and drop interface that even lets you choose which parameters are assigned to the high-resolution œGRF knobs. You can reprogram SCOOPER in realtime via USB connection or save and recall patches with a simple audio signal. You can even share patches with other SCOOPER users.
Parameter and effects control
LFO, ADSR, Noise, Sample & Hold, Ring Mod, Filter 6db, Filter 12db, Tone, Amp, Mixer, Stereo Mixer, Curve Conv, Gate Divider, Trig To CV Delay Time, MIDI Clock to Gate
Features
- Single-pass looper with dramatic Scatter effects
- CV/Gate parameter control including Scatter depth/type, pitch, and filter
- Tabletop unit or 21 HP Eurorack module using AC adaptor or Eurorack power
- 24-bit knobs with over 16 million steps of resolution
- Re-programmable via Mac, PC, iOS, Android application
- 15 patchable submodules, expandable with free updates
- 2 inputs and 2 outputs with dual-mono or stereo capability
- AIRA Link compatible
- 24bit/96kHz audio interface
- Carefully crafted in Japan
- Includes braided patch cables
Specs
- REC/PLAY button
- GRF 1 knob (SCATTER DEPTH)
- GRF 2 knob (SCATTER TYPE)
- GRF 3 knob (PITCH)
- GRF 4 knob (FILTER)
- GRF 5 button (SYNC TRIG)
- GRF 6 button (SCATTER)
- VOLUME knob
- Center Indicator
- INPUT 1, 2 jacks: Miniature phone type
- REMOTE IN jack: Miniature phone type
- OUTPUT 1, 2 jacks: Miniature phone type
- GFR 1“6 jacks: Miniature phone type
- USB port: MicroB type (Audio/MIDI)
- DC IN jack
- AC adaptor or Eurorack power
- 950 mA (AC adaptor)
- 450 mA (Eurorack power)
- Owner's Manual
- Leaflet "USING THE UNIT SAFELY"
- Eurorack installation screws
- Eurorack power cable
- Patch cables
- Width: 4.25 (106.6 mm)
- Depth: 4-1/4 (128.4 mm)
- Height: 5-1/16 (58.3 mm)
- Weight: 2-5/16 (320 g)
- 12 oz.