TubeDigitalBoards
Call 866‑388‑4445 or chat for exclusive deals, plus save on orders of $199+
Open Box Markbass CMD 151P Jeff Berlin Signature 300W 1x15 Bass Combo Amp Level 1
(22)|Q&A|Item #:481796004000000
Condition: Open Box - Like New
Need Help?
Description
Jeff Berlin teamed up with Markbass to create this sweet signature bass combo amp, the CMD 151P. Jeff is a master bass soloist who has been playing with some of the greats for the past 30 years, including Isaac Hayes, Bill Bruford, John Mclaughlin, and the Brecker Brothers, just to name a few.
Like the other CMD amp models, the 151 combo has a built-in Little Mark II preamp to help you achieve your own signature sound. The Markbass CMD 151 also has 4-band EQ and VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter) filters. Unlike other bass amplifiers, the Markbass CMD 151 has no tweeter. Jeff doesn't believe in them. And if you listen to any of his performances, you'll notice there's nothing missing in his sound. The 400W 15" Markbass custom speaker will give you all the sound you need with a tone you'll find impeccably unique and warm. Just like Jeff Berlin's playing.
Like the other CMD amp models, the 151 combo has a built-in Little Mark II preamp to help you achieve your own signature sound. The Markbass CMD 151 also has 4-band EQ and VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter) filters. Unlike other bass amplifiers, the Markbass CMD 151 has no tweeter. Jeff doesn't believe in them. And if you listen to any of his performances, you'll notice there's nothing missing in his sound. The 400W 15" Markbass custom speaker will give you all the sound you need with a tone you'll find impeccably unique and warm. Just like Jeff Berlin's playing.
Features
- Provides 500W at 4 ohm or 300W at 8 ohm
- Gain and Master volume controls
- Clip warning light
- EQ includes controls for Low, Mid Frequency Low, High Frequency Low, and High
- Provides 500W at 4 ohm or 300W at 8 ohm
- Gain and Master volume controls
- Clip warning light
- EQ includes controls for Low, Mid Frequency Low, High Frequency Low, and High
- VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter) filters
- Neutrik Speakon Combo out jacks for use with 1/4" or Speakon speaker cables
- Balanced XLR out
- Ground lift switch to eliminate hum
- Tuner out sends unbalanced signal sent to a tuner, amp or recording equipment not needing a balanced signal
- Send and Return Effect ensures main signal continues even if something dies in your effects chain
- Neutrik Speakon Combo out jacks for use with 1/4" or Speakon speaker cables
- Balanced XLR out
- Ground lift switch to eliminate hum
- Tuner out sends unbalanced signal sent to a tuner, amp or recording equipment not needing a balanced signal
- Send and Return Effect ensures main signal continues even if something dies in your effects chain
Specs
- Input impedance: 500Kohm, max. voltage: 15 Vpp
- Balanced Output (XLR): 22Kohm, max. voltage 25 Vpp
- Effect Return impedance: 22Kohm, max. voltage: 25 Vpp
- Output Power: 300W RMS at 8 ohm, 500W RMS at 4 ohm
- Voltage is factory preset for the U.S.
- GAIN ”80 dB to +23 dB range
- MASTER VOLUME
- GROUND LIFT: switch on rear panel
- LOW
- Center frequency: 40Hz; level ±16dB
- LOW MID
- Center frequency 360Hz, level ±16dB
- HIGH MID
- Center frequency 800Hz, level ±16dB
- HIGH
- 10kHz shelf; level ±16dB
- VPF (Variable Pre-shape Filter)
- center frequency 380Hz (cut)
- VLE (Vintage Loudspeaker Emulator)
- frequency range 250Hz”20kHz (cut)
- EFFECT SEND
- Unbalanced, max. voltage 20 Vpp (pre-EQ)
- TUNER OUT
- Unbalanced, max. voltage 25 Vpp
- LINE OUT
- Balanced XLR, max. voltage 10 Vpp
- SPEAKER OUT
- Speakon, 1/4"