Antelope Audio is dedicated to pro audio equipment manufacturing, and helping people achieve high-definition sound in the recording studio. The Eclipse 384 is a product of this devotion. The Eclipse 3... Click To Read More About This Product
Antelope Audio is dedicated to pro audio equipment manufacturing, and helping people achieve high-definition sound in the recording studio. The Eclipse 384 is a product of this devotion. The Eclipse 384 is a high-end stereo AD/DA converter that is clocked by Antelope's renowned 64-bit technology, providing mixing and mastering engineers with an unprecedented level of productivity, sound, quality, and ease of use.
64-bit DSP Trinity-level clocks
The Eclipse comprises 384 kHz A/D & D/A converters clocked by two independent 64-bit DSP Trinity-level clocks. The fully integrated monitor controller employs 0.05 dB accurate gold-plated relay attenuators and provides speaker switching, bass management and cue mix functions with integrated talkback. The Eclipse also includes two dedicated headphone amplifiers and a custom USB interface, as well as two large peak meters on the front panel. The advanced software control panel compatible with both Mac & PC, allows five nameable presets for easy recall of favorite setups.
Studio and live
Master clocks are becoming more and more popular for use with digital consoles and recording equipment at concerts and live events. By using the Eclipse 384, a live sound engineer is able to provide sync reference for up to four different devices, while using the main D/A for backing material, the A/D with multiple digital outs feeding redundant recording systems, and monitor DAC to check the recording post A/D conversion.
Supreme audio quality and boosted efficiency
The unique dual-domain clocking system enables analog-based, more natural sounding sample rate conversion. The integrated patching/routing capabilities make monitoring of either analog or digital sources extremely simple, avoiding jitter, distortion and cabling noise. By eliminating the many input and output stages and the various power supplies, that would be present in separate devices, the noise floor can be substantially reduced and the audio quality significantly improved.
64-bit DSP Trinity-quality clocking
Factory calibrated to better than +/- 0.001 ppm stability
Two independent sample rates
Varispeed capability of +/- 200 cents
10M atomic clock input
384 kHz A/D & D/A converters
A/D with Dynamic Range of 124dB
D/A with Dynamic Range of 129dB
Burr-Brown D/A conversion chip
Two bypassable A/D inserts
Custom USB 2.0 chip streaming up to 480 Mbits
Three sets of switchable monitor outs
Second dedicated monitor D/A
Bass management with LFE output
Precise input and output peak meters
Talkback and cue mix functions
Relay volume attenuator matched to 0.05 dB
3 x Combo Balanced Analog (XLR / ¼ TRS)
2 x ¼ TRS A/D Insert points
1 x ¼ TRS Talkback
1 x ¼ TRS Foot switch
3 x AES/EBU on XLR. 32kHz to 192kHz @ 110 Ohms terminated
2 x S/PDIF on RCA. 32kHz to 192kHz @ 75 Ohms terminated
2 x TOSLINK on optical fiber: up to 96kHz
2 x Balanced XLR outputs from D/A Converter
3 x Balanced Outputs for monitors (1 x XLR and 2 x TRS)
1 x Balanced XLR LFE Out
2 x ¼ TRS Cue Mix Headphones
2 x ¼ TRS Front Headphones
2 x AES/EBU on XLR for the A/D converter out (32kHz to 192kHz; 384kHz for dual wire when 384kHz is selected in the clock) @ 110 Ohms terminated
2 x De-jittered AES/EBU on XLR (32kHz to 192kHz; 384kHz for dual wire when 384kHz is selected in the clock) @ 110 Ohms terminated
1 x De-jittered S/PDIF on RCA (32kHz to 192kHz) @ 75 Ohms terminated
1 x De-jittered TOSLINK on optical fiber: up to 96kHz
USB 2.0 Hi-Speed; Data stream up to 480Mbits/384kHz, Type B
1 x 10M Atomic Clock input @ 75 Ohms 3Vpp on BNC 44.1 - 384kHz
1 x Word Clock Input @ 75 Ohms 3Vpp on BNC 44.1 - 384kHz
4 x Word Clock Outputs @ 75 Ohms 3Vpp on BNC 44.1 - 384kHz square wave signal
Dynamic Range: 129dB
THD + N: 0.0004 %
Dynamic Range: 123dB
THD + N: 0.0004 %
4th Generation Acoustically Focused Clocking
Oven Controlled Crystal Oscillator
<+/-0.02 ppm, oven controlled at 64.5ºC/ 148.1ºF
Clock Aging < 1 ppm per year
Clock Calibration <+/_0.001 ppm
Atomic Clock Input 10MHz @ 1Vpp, BNC
Sample Rates (kHz) 32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384
Clock Generators 2 Independent Clock Generators
Varispeed +/-200 cents
+ 12.246 %
Operating Temperature 0-50ºC/32- 122ºF
Weight 8 kg/17,64 lb
Dimensions (approx.) Width: 483 mm/19"
Height: 88 mm/3.47"
Depth: 282 mm/11.1"
Power Supply AC Universal input 95-245VAC 20 Watts Max Consumption
Pro Coverage gives you added warranty protection for your gear. Stepping in where the manufacturer's "normal wear and tear" coverage ends, our Pro Coverage program offers you upgraded coverage if your product ever fails Click To Read More About This Product.