Extremely low self-noise and the highest SPL transmission!

Neumann TLM-102/ZST stereo microphones are at home in even the finest project recording studios. These large diaphragm mics provide platinum-quality sound on a bronze budget, use transformerless circuitry for ultralow self-noise and handle sound pressure levels up to 138dB. Cardioid polar pattern optimizes attenuation of unwanted sound and suppresses feedback. Protective wire mesh grilles protect capsules and prevent pop noises. Frequency range: 20Hz to 20kHz. Impedance: 50 ohms. Factory-matched stereo pair ensures even tonal balance between mics.

Neumann TLM-103/ZST Stereo Microphone Pair Features:

Large diaphragm cardioid microphone
Pressure gradient transducer with one-diaphragm capsule
Transformerless circuitry
Extremely low noise: 7dB-A
Includes swivelmount
Straightforward handling for home recording and professional studios
High-quality professional equipment for limited budgets

Neumann TLM-103/ZST Stereo Microphone Pair Specifications:

Acoustical operating principle: pressure gradient transducer
Directional pattern: cardioid
Frequency range: 20Hz-20kHz
Sensitivity at 1kHz into 1kOhm: 21 mV/Pa
Rated impedance: 50 ohms
Rated load impedance: 1,000 ohms
S/N ratio CCIR 468-3: 17.5dB
Equivalent SPL DIN/IEC 651: 7dB-A
S/N ratio CCIR 468-3: 76.5dB
S/N ratio DIN/IEC 651: 87dB
Maximum SPL for THD 0.5%: 138dB
Maximum output voltage: 13dBu
Dyn. range of the mic. amplifier DIN/IEC 651: 31dB
Supply voltage: 48V ±4V
Current consumption: 3mA
Matching connector: XLR 3F
Weight: approx. 1 lb. (500g)
Diameter: 2-2/5" (60mm)
Length: 5-1/5" (132mm)

Neumann TLM-103/ZST Stereo Microphone Pair Includes:

2, 1 each suspensions, cables, windscreen and case