Perfect for the rehearsal studio, recording studio, smaller gigs, or the wood shed. The N10S is rated at 80W at 8 ohms and offers a solid, punchy sound with clean crisp highs from a cast-aluminum bull... Click To Read More About This Product
We're sorry—we no longer carry this item.
Find a similar product below or contact us for a recommendation of a great alternative.
Perfect for the rehearsal studio, recording studio, smaller gigs, or the wood shed. The N10S is rated at 80W at 8 ohms and offers a solid, punchy sound with clean crisp highs from a cast-aluminum bullet tweeter. All plywood construction, and the N10S works well with 4 or 5 string basses.
80W power @ 8 ohms, 100W @ 4 ohms with extension speaker
10" bass driver and bullet tweeter
Dual input channels: RCA and 1/4" aux inputs with gain and tone balance; Gain, 3-band EQ, and Enhance on main input
Extension speaker output
Speaker mute switch
Pre-EQ effects loop
XLR recording out with volume control and signal level switch
Power: 80/100W RMS @ 8/4 ohms
Tweeter: T1004 bullet tweeter
Speaker: ES 1040
Power Handling: 150W RMS
Frequency Response: 42Hz - 18 kHz
Sensitivity: 97dB SPL@1W1M
Impedance: 8 ohms
Dimensions: 20-1/2"W x 16-1/2"H x 13-1/4"D
Weight: 45 lbs.
EDEN LIMITED WARRANTY The Eden Warranty on the David Line Products remains in effect for two years from the date of first consumer purchase.
WHO IS COVERED BY THIS WARRANTY? Your Eden Warranty protects the original purchaser as long as your Eden product has been purchased in the United States. If your product has been purchased outside the United States, please contact your local Eden distributor for warranty information. The original dated bill of sale must be presented whenever warranty service is required.
WHAT IS COVERED BY THIS WARRANTY? Your Eden Warranty covers defects in material and workmanship, except as specified below. The following items are not covered: -damage caused by accident, misuse or abuse -damage caused by product modification or neglect -damage caused by shipment -damage resulting from the performance of repairs by anyone not authorized by Eden Electronics -claims based upon any misrepresentation by the seller -damage to any Eden product on which the serial number has been defaced, modified or removed.
WHO PAYS FOR WHAT? In the event that warranty repairs are necessary, Eden Electronics will pay for all labor and materials on all factory authorized repairs covered by this warranty. Eden Electronics will have no obligation to pay for repairs not authorized as warranty by Eden Electronics. Save the original shipping carton. Upon authorization, return the equipment in the original carton to Eden. Replacement cartons may be available upon request for an additional charge. Improper packaging may cause damage resulting in denial of this warranty. If repairs are covered by warranty, Eden will pay to ship the equipment back to you. You are responsible for shipping charges to the factory.
HOW TO OBTAIN WARRANTY SERVICE If your equipment needs repairs, first contact your local Eden dealer or Eden Electronics, Inc. 444 E. Courtland St., Mundelein, IL 60060 or call (800)877-6863 or (847)949-0444. You will need to present a copy of the original dated bill of sale. Please do not ship your equipment to the factory without prior authorization. You are responsible for properly transporting your product to the factory.
LIMITATION OF IMPLIED WARRANTIES The above warranty is in lieu of any and all other warranties, expressed or implied, including but not limited to warranties of merchantability and fitness for particular purpose. Neither the dealer nor the manufacturer shall be liable for any incidental or consequential damages resulting from any alleged defect and the warranty shall extend exclusively to repair or replacement of the equipment described. This limited warranty gives you specific legal rights, you may also have other legal rights which vary from state to state.