The Nady WHM-16 Headmic Wireless System includes the MGT-16 receiver and the WH-16 Head-Worn Transmitter
The Nady MH-16 is a Compact, lightweight headset transmitter fits snugly on the back of your head. No cord connection needed. The headset frame is completely rubberized for comfortable, trouble-free performance. A flexible gooseneck allows optimum microphone positioning.
The Nady MGT-16 is a compact receiver can be placed anywhere you choose. It is powered by internal AA batteries or AC adapter (supplied). Has 16 user-selectable UHF frequencies for interference-free operation. ASC (Auto-Sync Channel) infrared wireless download pairs transmitter to selected receiver frequency for quick, easy setup. It has a 250 ft. line-of-sight operating range, and is powered by single AAA battery.
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.
MGT-16 Instrument Receiver
Compact, portable, œpedal style receiver can be placed anywhere
Dual ¼ wave antennas
Unbalanced ¼ line output plug
Power On/Off/Mute switch; Volume Control; LED indicators for Low Battery, and RF Reception; DIP-switch channel selection with IR sync to transmitter; IR Sync LED
Powered by DC adapter (included) or two AA alkaline batteries for
portability (Up to 8 hours battery life)
WH-16 Head-Worn Transmitter
Head-Worn (over ears style) transmitter for hands free, cordless operation
Up to eight hours of battery life from a single AAA alkaline or NiMH rechargeable battery
Infrared channel sync with receiver for instant setup
Power On/Off switch; Power/Low Battery LED indicators; IR Sync LED
External flexible wire antenna
General Frequency Response: 50Hz“16kHz (-3dB) Dynamic Range: 120dB Oscillating System: Phase Lock Loop (PLL) Total Harmonic Distortion (THD): <0.8% RF Carrier Frequency Range: 902.40MHz“923.70MHz Modulation: FM (F3E), +/-30KHz normal Operating Range: Up to 250 feet (typical, depending on site conditions)
MGT-16 Receiver Controls: Audio Level, Power ON/MUTE/OFF, Frequency Select DIP-switches, IR sync button Connectors: Unbalanced ¼, DC Adapter input jack LED Indicators: Power ON (Red-continuous), Low Power (Amber-continuous),RX reception (Green), IR Sync LED Antennas: Dual ¼ wave, adjustable orientation Signal-to-Noise Ratio: > 105dB (w/AC/DC power supply) Receiver Sensitivity: -110dBm nominal, 12dB SINAD Squelch Sensitivity: -95dBm (minimum/normal setting), adjustable Output Impedance: 1.0KÎ Power Consumption: DC: 3V/ 115mA or AC/DC adapter: 15VDC/200mA Battery: Two AA alkaline or NiMH Battery Life: Up to 8 hours Dimensions: 2.75 W x 5.00 D x 1.88 H (7.0 cm x 12.7 cm x 4.78 cm) Weight: (w/o batteries) 5.7 oz (161.6 g) Housing Construction: ABS Plastic
WH-16 Head-Worn Transmitter RF Power Out: 25mW nominal, 50mW maximum Harmonic & spurious emissions: -50dB Controls: Power ON/OFF LED Indicators: Power ON (Red-single flash), Low Battery (Red flashing) Input Impedance: 5KÎ Power Consumption: DC 1.5V/90mA Battery: One AAA alkaline or NiMH Battery life: Up to 8 hours Antenna: ¼ wave, permanently attached Dimensions: (w/Mic) 6 W x 7 D x 2.5 H (15.3 cm x 17.8 cm x 6.4 cm) Weight (w/o batteries): 2.1 oz (59.6 g) Housing Construction: ABS Plastic
Wireless Equipment (Most) *1 Year DKW-Duo, DKW-3 *90 Day Pro-Audio (Most *1 Year SPC-4C, ProPerformer microphones *90 Day RSM-1,2,3,4,& 5 *1 Year TRM-6 *1 Year Speakers/Powered Speakers *1 Year Headphones *1 Year Power Amps *1 Year Products identified as a "Blem" or "Refurb" carry a 90-day warranty.