Skip to main content

Nady PMX-600 Powered Mixer

Item #: 
1274741968732123590
  • Write a Review

The Nady PMX-600 Powered Mixer with DSP effects was developed using the expertise of professional sound engineers and working musicians. It has superior performance and offers greater flexibility than... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Recommended Products
Overview

The Nady PMX-600 Powered Mixer with DSP effects was developed using the expertise of professional sound engineers and working musicians. It has superior performance and offers greater flexibility than most other powered mixer in its price range.

FEATURES

6 mono input channels
XLR mic and 1/4" TRS line inputs
Fan-cooled, bipolar amplifier with 2 x 225W RMS power at 4 ohms
4 master faders
L/R main mix and G1-2 group submix buses
Group to Main enable switch
32-bit DSP reverb (plate, gate, room, hall, stadium)
2 x 7-band graphic EQ
Channel trims and peak LEDs
Switchable low-cut filters
Channel hi, low, and sweepable mid controls
Switchable +48 volt phantom power
2 aux sends and 2 aux returns each with level control
Tape/CD In and record out stereo RCA jacks with tape level control
6 balanced 1/4" TRS inserts
2 x 10-segment LED display bargraph meters with power amp peak indicator
Balanced 1/4" TRS and XLR stereo main outs
Balanced 1/4" group 1 and 2 outputs
Dual left and right 1/4" amplifier outputs for easy speaker daisy chaining
Internal shielded AC supply with 115V/230V selector switch
SPECIFICATIONS
INPUT SECTION

Input Connector Input Impedance Max Level
MONO CH MIC XLR BALANCED 2.8K_ +13dBu, 3.6V RMS*
MONO CHANNELLINE 1/4" UNBALANCED 10K_ +17dBu, 5.5V RMS
1/4" TRS BALANCED 20K_ +23dBu, 11V RMS
AUX RETURN 1/4" UNBALANCED 10K_ +11dBu, 2.8V RMS
TAPE IN STEREO RCAJACKS 10K_ +18dBu, 6V RMS
INSERTINPUT 1/4" UNBALANCED 10K_ +22dBu, 10V RMS
With Trim, Tape In, and Aux Return Level controls set to Mid (50%)
*With Trim set to Min (0%)
Phantom Power on XLR inputs : 48VDC, globally selected

MIXER SECTION
Trim: Range 28dB
Channel High EQ +/-15dB: 12KHz, Rotary control
Channel Mid EQ +/-15dB: Variable 250Hz - 6KHz, Two Rotary controls
Channel Low EQ +/-15dB: 80Hz, Rotary control
Channel Aux 1, Aux 2 Eff, Pan: Rotary controls
Low Cut, L-R Select, G1-2 Select: Push-button switches
Channel faders: -_to +10dB, 60mm sliders
Echo Effect Time Delay: 0 to 200mS
Dual 7-Band EQ +/-12dB: 63Hz, 250Hz, 630Hz, 1KHz, 2.5KHz, 6.3KHz, 15KHz 20mm sliders
Master and Group dual faders, Effect single fader : -_to +10dB, 60mm slider

MASTER OUTPUT SECTION
Channel Input to Main Output
Frequency Response: 20Hz25KHz (+/- 3dB)
THD + Noise: 0.04%
S/N Ratio: -85dB (gain controls @ unity), -94dB (gain controls down)
Noise Floor: 350uV (gain controls @ unity), 150uV (gain controls down)
Output Connector Output Impedance Max Level
AUX SEND 1 & 2 1/4" UNBALANCED 200_ +21dBu, 9V RMS
GROUP1 & 2 1/4" UNBALANCED 200_ +18dBu, 6V RMS
CONTROLROOM L-R 1/4" UNBALANCED 200_ +8dBu, 1.9V RMS
RECORD OUT STEREO RCAJACKS 1.4K_ +21dBu, 8.5V RMS
MAIN L-R 1/4" UNBALANCED 200_ +21dBu, 8.5V RMS
XLR BALANCED 400_ +27dBu, 17V RMS
HEADPHONE 1/4" STEREO 12_ 2 x 50mW, 1.75V RMS**
**When connected to 32_output

POWER OUTPUT SECTION
8_Both Channels Driven (1% THD): 150W RMS per side
4_Both Channels Driven (1% THD) : 200W RMS per side
Channel Input to Speaker Output
Frequency Response: 25Hz22KHz (+/- 3dB)
THD: 0.09%
S/N Ratio: -72dB (gain controls @ unity), -85dB (gain controls down)
Noise Floor : 9mV (gain controls @ unity), 2mV (gain controls down)
Amplifier Protection: Fan cooling, short circuit protection, current limiting, Speaker DC protection circuits, clip indicators,
Power ON/OFF relays for anti-thump circuit

GENERAL
Power Requirements: Voltage selectable, 115VAC/60Hz or 230VAC /50Hz
Fuse Requirements: 5x20mm glass tube F.B. 8A250V @ 115VAC
4A250V @ 230VAC
Weight : 24.5 lbs. (11.1 Kg)
Dimensions (HWD): 6.4" x 16.9" x 17.2" (163 x 430 x 437mm)
Pro Coverage
MANUFACTURER'S WARRANTY
Wireless Equipment (Most) *1 Year
DKW-Duo, DKW-3 *90 Day
Pro-Audio (Most *1 Year
SPC-4C, ProPerformer microphones *90 Day
RSM-1,2,3,4,& 5 *1 Year
TRM-6 *1 Year
Speakers/Powered Speakers *1 Year
Headphones *1 Year
Power Amps *1 Year
Products identified as a "Blem" or "Refurb" carry a 90-day warranty.


  • Customer Reviews
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.