Skip to main content

Nady PEM-500 Wireless System (564 - 574.3MHz)  

Item #: 
  • Write a Review

The wireless Nady's PEM-500 in-ear monitor system offers all the advantages of wireless in-ear monitoring”mobility, more focused audio, freedom from feedback, and elimination of transport issues assoc... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Recommended Products

The wireless Nady's PEM-500 in-ear monitor system offers all the advantages of wireless in-ear monitoring”mobility, more focused audio, freedom from feedback, and elimination of transport issues associated with conventional floor monitors”as well as the long-term health benefits of safe listening levels. The wireless system includes the PEM-500R bodypack receiver and a PEM-500T half-rack transmitter, as well as a pair of lightweight, miniature in-ear speakers.

For the first time, a wireless in-ear monitor system combines state-of-the-art advanced frequency-agile PLL synthesized UHF technology high-end performance, ease of use, and unprecedented affordability. The Nady PEM-500 wireless system offers a choice of 16 user-selectable UHF channels in both the transmitter and receiver(s) as well as stereo (MPX system) or mono mode transmission. This system is indispensable for live-stage music performance, and is loaded with features previously found only in wireless systems costing several times more.

Consumer Alert:

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at:

  • Available in the 564-574.3MHz UHF frequency band for interference-free, long-range performance (up to eight systems can be operated simultaneously, depending on location and frequency band)
  • System consists of PEM-500T stereo transmitter and one bodypack stereo PEM-R receiver (both offer 16-channel user selectability)
  • Any number of additional receivers can be operated with the same transmitter if all are set to the same channel
  • Proprietary companding circuitry for wide dynamic range and clear, natural sound
  • Operating range: up to 300 ft. typical (depending on site conditions)
  • Rugged, foam-padded traveling case provides easy, safe transport and storage
  • PEM-R Bodypack Wireless Receiver:
  • Portable bodypack receiver features a power switch; switchable built-in volume limiter; Output Level control; stereo/mono select switch; two-color (red/green) 3-way Unit On/Signal/low-battery LED indicators
  • Operates up to six hours (depending on volume) on a single 9V alkaline battery
  • Each receiver is supplied with a pair of miniature, lightweight (yet powerful) in-ear Koss stereophones with soft rubber foam mounts in three shapes (conical, cylindrical, and hexagonal); designed for fitted comfort and optimum acoustic transfer and isolation
  • Rear clip can be rotated 90 for attaching receiver either vertically or horizontally to clothing
  • PEM-500T Stereo Transmitter:
  • Rugged, all-metal half-rack can be rackmounted with single rackmount kit (included), or side-by-side with optional dual rackmount kit
  • Microphone Input allows wireless cueing of performers on stage
  • Front panel features Input Level control; stereo headphone monitor output jack and volume control; Select button for choosing one of 16 UHF channels, LED channel display; L/R 10-segment Audio Input Level displays
  • Back panel provides BNC jack for the detachable antenna; stereo/mono select switch, 1/4" TRS balanced microphone input, XLR jacks for left and right line inputs
  • Overall Wireless System
    Operating frequency range modulation: 564.000 - 574.3MHz
    Modulation: Mono or stereo (MPX with pilot tone), FM: F3E ±60KHz, nominal
    Audio frequency response: 5012,000Hz
    T.H.D.: <1%
    Signal-to-Noise Ratio: >80dB, with propietary companding noise reduction
    Operating Range: Up to 300 feet typical (depending on site conditions)

    PEM-500T Wireless Transmitter
    RF output power: Max. 50mW (country dependent)
    L/R audio line inputs:
    Input impedence: 600Î
    Nominal input level: 0dBm
    Max. input level: +6 dBm
    Headphones out power: 100 mW max. @32Î, 190mW @ 16Î
    Spurious Emission: > -55dBc
    Frequency stability: ±:100PPM
    Controls: Power On/Off, Stereo/Mono, and channel select switches; input level, headphones monitor volume controls
    Connectors: 1/4" stereo headphones monitor out, 1/4" TRS balanced mic input, balanced XLR & R line input, and 2.1mm barrel-type DC input jacks; BNC antenna socket
    Indicators: Power ON LED; channel and 10-segment L/R audio input LED displays
    Antenna: 1/4 wave rigid detachable, BNC mount
    Power requirement: 14V, 500mA, AC adapter supplied, (UL/CSA approved 120VAC or CE approved 230VAC)
    Dimensions: 8.27"D x 9.13"W 1.73"H (210mm x 232mm x 44mm)
    Weight: 2.98lb. (1.35kg)

    PEM-500R Wireless Receiver
    Maximum audio output level: 20mW
    Minimum audio output load impedance: 16Î
    RF sensitivity: 2.5uV (-100dB/12dB SINAD)
    Squelch threshold: < -90dB
    Spurious rejection: >55dBc
    Audio output connector: 3.5mm Stereo (Tip=left, Ring=Right, Sleeve=ground)
    Controls: Volume adjust, limiter ON/Off, power ON/OFF, Stereo/Mono select switches; 16-channel selector switch
    Indicators: Two-color (red/green) 3-way unit, ON/Signal/Low Battery LED
    Power requirements: 9V alkaline battery
    Current drain: < 40 mA
    Battery life: Up to 6 hours, volume dependent
    Antenna: Internal
    Dimensions: 4.2"H x 0.9"D x 2.6"W (106mm x 23mm x 66mm)
    Weight: 2.85oz. (80kg)
Wireless Equipment (Most) *1 Year
DKW-Duo, DKW-3 *90 Day
Pro-Audio (Most *1 Year
SPC-4C, ProPerformer microphones *90 Day
RSM-1,2,3,4,& 5 *1 Year
TRM-6 *1 Year
Speakers/Powered Speakers *1 Year
Headphones *1 Year
Power Amps *1 Year
Products identified as a "Blem" or "Refurb" carry a 90-day warranty.

  • Customer Reviews
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.