Nady XA-300 Stereo Power Amplifier

Superior performance and flexibility at a giveaway price!

Just look at all you get with the Nady XA-300 Stereo Power Amplifier: 2x150W @ 4 ohms, bridged mono: 300W @ 8 ohms (2 ohms and 4 ohms bridged not recommended). Detent volume controls, parallel balanced XLR and 1/4" TRS inputs. Stereo (dual channel), parallel input, or bridged mono modes with selector switch. Binding post (banana plug) outputs. 3 variable-speed fans for cooling and soft-start turn on with noise-free on/off prevents annoying pops. Built-in DC protection, independent DC and thermal overload on each channel, short circuit and speaker protection, DC servo operation, and digital limiter. Includes power on, clip, signal, and protect LED indicators for each channel. Rugged 2U rackspace housing.

Nady XA-300 Stereo Power Amplifier Features:

Volume controls
Parallel balanced XLR and 1/4" TRS inputs
Stereo (dual channel), parallel-input, or bridged mono operating modes with selector switch
Binding post (banana plug) outputs
3 variable-speed fans for cooling
Soft-start turn on, noise-free on-off
Built-in DC offset
Independent DC and thermal overload protection on each channel
Short-circuit and speaker protection
Built-in current limiter
Power ON and Protect LEDs
Signal and Clipping LED indicators for each channel
Switching power supply for most reliable operation and lightweight portability
Roadworthy, rugged double rackspace (2U) housing
~115V(60Hz)/~230V(50Hz) AC select switch and IEC power cord connector with built-in fuse
2x150W @ 4 ohms, bridged mono: 300W @ 8 ohms (2 ohms and 4 ohms bridged not recommended)
120W RMS @ 8 ohms per side
(EIA 1kHz 1% THD) 150W RMS @ 4 ohms per side
300W RMS @ 8 ohms bridged
Minimum 4 ohms per side, 8 ohms bridged
Input Sensitivity: 500V RMS (-4dBu)
Input Impedance: 50kOhm Unbalanced & Balanced
Frequency Response (at 10dB below rated output power): 20Hz~20kHz ±1dB, 5Hz~50kHz ±3dB
Distortion (SMPTE-1M): <.1%
S/N Ratio: 100dB
Protections: Full short circuit, open circuit, thermal, ultrasonic, and RF protection; stable into reactive or mismatched loads; ON/OFF muting; current limiter
Front Panel: Power switch, input level control for each channel
Rear Panel: Parallel/Mono/Bridge selector, AC voltage selector switch
Connectors: Power; IEC power cord jack; Input: Active balanced XLR and 1/4" (6.3mm) TRS; Output: Touch-proof binding posts
Voltage selectable power supply: 110V~120V or 220V~240V AC 50/60Hz
Fuse: 115V AC ~ 6A 250V FB; 230V AC ~ 3A 250V FB
Dimensions: 19" x 12-2/5" x 3-1/2" (483 x 315 x 89 mm)
Weight: 13 lbs. (5.9kg)

Nady XA-300 Stereo Power Amplifier Specifications: