4 independent systems in a single rack space!

Designed for all professional applications, the amazingly affordable Nady 401X Quad wireless mic system gives you the mics, the transmitters, and receivers for 4 independent wireless channels—all in a single rackspace unit. Full-featured operation, quality RF and audio, and rackmount convenience.

With our Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!

Nady 401X Quad HT 4 Hand-held VHF Channels Features:

General:
4 independent VHF receivers in one convenient, rugged, all-metal single rack space housing—makes operating 4 wireless systems at the same time easier than ever
Front dual antenna jacks for either onboard or remote antennas
Front panel Power ON/OFF switch, plus Power ON LED, TX ON and AF signal level LED displays
Noise-free transmitter ON/OFF operation
Rear panel individual XLR Output jacks, volume and RF mute controls for each of the 4 channels, and 4-Channels-Mixed AF Out 1/4" phone jack
High performance—unmatched transparent audio with 120 dB dynamic range and up to 250+ feet optimum line-of-sight operation
WHT— Handheld Microphone Transmitter:
Features the Nady DM-10D unidirectional neodymium dynamic cartridge for optimum turret sound, maximum feedback, rejection and minimal handling noise
OFF/STANDBY/ON switch allows convenient audio muting with the transmitter "ON"
Low battery LED indicator flashes once for unit "ON"; lights steady for low battery alert
Rubber, "easy-mount" mic clip included

Nady 401X Quad HT 4 Hand-held VHF Channels Specifications:

401X Quad overall system performance
Frequency Response: 30-18KHz (-3dB)
Dynamic Range 120dB: (20-20KHz)
Total Harmonic Distortion: <0.5% (typical)
RF Carrier Frequency Range: 170-230MHz (Factory installed Channels)
Frequency Stability: +/- 0.005%, crystal controlled
Modulation FM (F3E): +/-15KHz nor,+/-30KHz max
Operating Range: 250 feet typical—up to 500+ feet optimum line-of-sight
Frequency Group 1
Channel A = 171.905 MHz
Channel B = 185.15 MHz
Channel D = 209.150 MHz
Channel N = 197.150 MHz
Frequency Group 2
Channel E4 = 173.8 MHz
Channel H = 191.3 MHz
Channel F = 203.4 MHz
Channel E = 215.2 MHz
WHT Handheld Microphone Transmitter:
Audio Inputs: Nady DM-10D neodymium dynamic cartridge
Controls:
OFF/STANDBY/ON switch
LED Indicator Unit "ON" (single flash), Low Battery Alert (steady)
RF Power Out 50mW (Max. allowed by FCC)
Harmonic & Spurious Emissions <-40dB
Battery 9V Alkaline
Battery Life Up to 20 hours
Dimensions: 9.5" X 1.4" Diameter (24.1 X 3.5 cm)
Weight (w/o battery): 6.9 oz (193 g)
401X Quad receiver
Controls; Power ON/OFF, volume control, mute control
Connectors:
1 unbalanced adjustable mixed (all four channel)
1/4" T-S audio output jack. Line level, 600 ohms
balanced fixed level XLR. #1=GND, #2-3=signals
Line/Mic level, 11k/600 ohms
Receiver: 2.1 mm barrel-type DC input jack (tip=positive)
LED Indicators: 1 Power ON LED, 4 AF LED, 4 TX ON LED
Dimensions: 1.75"x 7.5"x 16.5"(4.4 x 19 x 42 cm)
Weight: 4.5 lbs (2 Kg)
Power Requirements: 16V @ 800mA, nominal, AC/DC adapter supplied
Antenna Connectors: Dual female BNC connectors