The MA-101fet is a small diaphragm, solid-state condenser microphone with interchangeable cardioid and omnidirectional capsules. Designed by renowned microphone designer David Royer, the MA101fet comb... Click To Read More About This Product
We're sorry—we no longer carry this item.
Find a similar product below or contact us for a recommendation of a great alternative.
The MA-101fet is a small diaphragm, solid-state condenser microphone with interchangeable cardioid and omnidirectional capsules. Designed by renowned microphone designer David Royer, the MA101fet combines the features of two of Mojave Audio's popular models - the cardioid and omnidirectional capsules from the MA-100 with the electronics from the MA-201fet. New to the MA-101fet is an internally switchable -15dB pad, increasing the headroom to an ear shattering 135dB SPL. This makes the MA-101fet suitable for everything from capturing the subtle nuances of acoustic instruments to the loudest of electric guitars and drums - great for location recording, too.
Featuring hand selected, 3-micron cardioid and omni capsules, a high quality Jensen audio transformer and military-grade FET and custom designed low noise resistors; the MA-101fet is designed to offer excellent performance for a wide variety of applications. Each MA-101fet microphone is carefully tested and evaluated, then packaged in its protective case.
Interchangeable cardioid and omnidirectional hand-selected 3-micron capsules
Internally switchable -15dB attenuator
Jensen audio transformer
Custom designed low-noise resistors
Ultra clean signal path
High SPL sources, such as Kick Drums and Bass Guitar Amps
Snare Drums, Toms, Drum Overheads
Capsules: Interchangeable Cardioid and Omnidirectional Diaphragm: 0.8" (20.5 mm) diameter Diaphragm thickness: 3-micron Frequency Response: 20Hz - 20 kHz +/- 2.5 dB Sensitivity: -39 dB re.1V/pa +/- 1.5 dB Maximum SPL: 125 dB pad off, 140dB pad on. Distortion: <1% @ 120dB pad off, <1 % @ 135dB pad on Self-Noise: 14 dB nominal, not to exceed 16 dB (A weighted) Impedance: 550 ohms, transformer balanced (Jensen) Power Requirements: 48VDC phantom power; .68 mA wall current DIMENSIONS AND WEIGHT: Carrying Case with microphone: 8.3" x 6.7" x 3.3" (21 x 17 x 8.5 cm), weight 1.8 lb, (0.82 KG) Microphone: 6.75" x 1.12", weight 8 oz