Four classic plug-ins in one legendary bundle.
McDSP's legendary emulations of vintage equalizers, compressors, tape machines and channel amplifiers are available together as McDSP Classic Pack v5. This historical bundle of signal processing software consists of four different plug-ins, each one as legendary as the next. Included is the Analog Channel v5, CompressorBank v5, FilterBank v5, and the MC2000 v5.
Analog Channel v5
Analog Channel is 2 plug-ins:
AC101 - Emulates analog channel amplifier circuits
AC202 - Emulates analog tape machines
The AC101 configuration acts as a digital pre-amp allowing even excessive amounts of gain without digital distortion. A drive control determines where the audio "sits" in the saturation/compression region, and even the attack and release times of the distortion character are adjustable.
The AC202 configuration emulates analog tape machines. In addtiion to standard tape machine parameters such as bias, playback speed, and IEC1/2 equalization, AC202 offers controls well beyond the limits of the reel-world devices including adjustable low frequency roll off and head bump - independent of playback speed. The user can select from several playback head types, tape formulations, and even control the tape saturation recovery time.
CompressorBank is 3 plug-ins:
CB101 - basic compression
CB202 - compression with pre-filtering
CB303 - compression with pre-filtering and static/dynamic EQ
In addition to the standard threshold and ratio controls, the actual shape and response of the compression curve can be adjusted with the Knee and BITE controls. Flexible compression control is complimented with pre-filtering and post-compression EQ.
FilterBank is 3 plug-ins:
E606 - parametric, high and low shelving EQ, high and low pass filters
P606 - parametric EQ with variable Q modes
F202 - steep high and low pass filtering with resonant Q control
With its unique Peak, Slope, Dip controls and variable Q modes FilterBank can emulate any EQ, or be used to create a distinct custom EQ.
MC2000 is 3 plug-ins:
MC202 - two-band compression
MC303 - three-band compression
MC404 - four-band compression
The MC2000 gives the user complete control of multi-band dynamic compression. Common controls such as output (make-up gain), threshold, compression (ratio), attack, and release are provided. Non-standard Knee and BITE controls allow unique and unprecedented articulation of compression characteristics. Multiple peak detection circuit types provide flexibility only previously achieved by owning several compression units. Steep 24 dB/Oct crossover filters minimize signal leakage into adjacent compression bands.