Flash Deals: New Deals Just AddedShop now »

F1 500W Bass Amp Head

Item #: 
1274319726171
  • Write a Review

The F1 is Markbass' lightest and smallest bass amp head to date. At 500W the F1 bass amp boasts an unbelievable power-to-weight ratio of more than 100W per pound. Its digital power amp gives the Markb... Read More

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Overview

The F1 is Markbass' lightest and smallest bass amp head to date. At 500W the F1 bass amp boasts an unbelievable power-to-weight ratio of more than 100W per pound. Its digital power amp gives the Markbass F1 bass amp head super-fast response and a crisp, clear, full sound that will convey every detail of your playing, instantly.

The F1 amp head's 1/4" input jack works with both active and passive basses and allows you to EQ your sound with Low, Mid Low, High Low, and High control knobs, as well as Markbass' exclusive VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter) filters, with separate Gain and Master volume controls.

The rear panel has a balanced XLR out, Neutrik Speakon Combo jacks which work with either Speakon or 1/4" speaker cables, a tuner out, as well as Effect Send and Return 1/4" jacks to ensure you don't lose your main signal if a piece of your effects chain dies. There is also a ground lift switch to help eliminate hum. Despite being lightweight, the Markbass F1 bass amp head is made with a rigid 2mm thick aluminum chassis to ensure your investment can handle the rigors of the road.

Features
  • Digital amp bass head
  • Provides 300W RMS at 8 ohms, 500W RMS at 4 ohms
  • 1/4" input jack works with active or passive basses
  • Gain and Master volume controls
  • Clip warning light
  • EQ includes controls for Low, Mid Frequency Low, High Frequency Low, and High
  • VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter) filters
  • Neutrik Speakon Combo out jacks for use with 1/4" or Speakon speaker cables
  • Balanced XLR out
  • Ground lift switch to eliminate hum
  • Tuner out sends unbalanced signal sent to a tuner, amp or recording equipment not needing a balanced signal
  • Send and Return Effect ensures main signal continues even if something dies in your effects chain
  • Dual-sided fiberglass PC boards with lined perforations for high-quality solder connections
  • Surface-mount components are silicon-sealed to isolate vibrations
  • Computer-grade pre-assembled ribbon connector cable harnesses and ribbons for noise-free operation
  • Integrated threaded posts for easy assembly/disassembly and added durability
Specifications
  • Power
  • Input impedance: 500Kohm, max. voltage: 15 Vpp
  • Effect Return impedance: 33Kohm, max. voltage: 25 Vpp
  • Output Power: 300W RMS at 8 ohm, 500W RMS at 4 ohm
  • Voltage is factory preset for the U.S.
  • Controls
  • GAIN: —80dB to +25dB range
  • GROUND LIFT: Switch on rear panel
  • MASTER VOLUME
  • Equalization
  • LOW
  • Center frequency: 40Hz; level ±16dB
  • LOW MID
  • Center frequency 360Hz, level ±16dB
  • HIGH MID
  • Center frequency 800Hz, level ±16dB
  • HIGH
  • 10kHz shelf; level ±16dB
  • VPF (Variable Pre-shape Filter)
  • center frequency 380Hz (cut)
  • VLE (Vintage Loudspeaker Emulator)
  • frequency range 250Hz—20 kHz (cut)
  • Outputs
  • EFFECT SEND
  • Unbalanced, max. voltage 20 Vpp (pre-EQ)
  • TUNER OUT
  • Unbalanced, max. voltage 25 Vpp
  • LINE OUT
  • Balanced XLR, max. voltage 10 Vpp
  • SPEAKER OUT
  • Speakon, 1/4" x 2
  • Other
  • Dimensions: 10.87"(W) x 1.73"(H) or (1U) x 10.04"(D)
  • Weight: 4.63 lbs.
  • Customer Reviews
Loading....

REVIEW SNAPSHOT®

by PowerReviews
 
4.3

(based on 3 reviews)

Ratings Distribution

  • 5 Stars

     

    (2)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 3 customers

Sort by

Displaying reviews 1-3

Back to top

(1 of 1 customers found this review helpful)

 
3.0

Good sound but can't handle slap bass

By joe slapper

from brooklyn ny

This head sounds great with finger style playing but when ever you make the clip light go on it is just stops working until you turn it off and back on. This will happen constantly if you play slap style at reasonable volume.

Comment on this review

(2 of 2 customers found this review helpful)

 
5.0

Best Little Amp I've ever had

By Anthony Sanders

from seattle Wa

I was blown away at the size and the amount of power this little light weight amps has, I first sat in on a jam session and played through this amp, it was a buddy of mines. Very powerful and clean sounding especially with the new ( VLE & VPF) knobs you can dial in the sounds you want without all the adjustments I'm playing my F1 through the markbass traveler 102p and I added the traveler 151p. Markbass has really made it easy to have all you need in a great compact package I'm very happy and I will tell anyone who asks about markbass products to just try it before you miss out on a great product!

Comment on this review

(6 of 6 customers found this review helpful)

 
5.0

Exellent, well worth the money

By Dark Moose

from Albuquerque, nm

This tiny amp packs a suprising punch. It can do anything that any other 500 watt head can and more, the built in emulators add some extra control to tone and let youre sound match your preference. On top of this you have the outstanding tone you would get from any Markbass head! I run this through a Markbass 6x10 rear ported cab and it sounds fantastic. Once you get the rackmount kit(about 30 bucks) it is a single rack space, so you arent killing off half of your rack just for the amp. with this you only need a 4-6 space rack to cover anything you could ever need (i say 6 space if you want a 2 space rack drawer) its reall convenient and does the job with flying colors. The only drawback is that Markbass gear uses 3 pronged speak-on cables which are rather difficult to come by (at least in this city) i had one professionally made for about 45 buck. (you can still use 1/4 inch inputs on a speakon connection it just doesnt sound anywhere near as good) A Fantastic buy, is suggest this to anyone, and often do.

Comment on this review

Displaying reviews 1-3

Back to top

You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.