A high-powered analog bass head made for bassists who just want to rock.
The Markbass R500 is a bass amplifier head that will have you rocking out old-school, rocking hard, creating your own alternative rock, or shredding up the stage stealing the spotlight from your guitarists! The 500W analog R500 amp (at 4 ohms; 300W at 8 ohms) features a tube preamp that will break up just the way you want it to, and a newly designed limiter that produces glorious distortion instead of cramping your style. The simple 4-band EQ gives you all you need to access a wide range of sounds for any genre. As far as controls, the Gain knob is for the amount of tube overdrive, whereas the Master knob is for your volume.
With our Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!
Markbass R500 500W Bass Amp Head Features:
- Analog amp with a tube preamp which provides 500W at 4 ohms; 300W at 8 ohms1/4" input jack works with passive or active bassesGain knob controls tube overdriveMaster knob controls volumeLine out controls rear XLR line out volume level4-band EQ: Low, Low Mid, High Mid, HIghNeutrik Speakon Combo out jacks for use with 1/4" or Speakon speaker cablesBalanced XLR line outPre EQ/Post EQ switch to determine whether the output signal is effected by the EQ settings or notGround lift switch to eliminate humTuner out sends unbalanced signal sent to a tuner, amp or recording equipment not needing a balanced signalSend and Return Effect ensures main signal continues even if something dies in your effects chainDual-sided fiberglass PC boards with lined perforations for high-quality solder connectionsSurface-mount components are silicon-sealed to isolate vibrationsComputer-grade pre-assembled ribbon connector cable harnesses and ribbons for noise-free operationIntegrated threaded posts for easy assembly/disassembly and added durabilityRigid 2mm thick aluminium chassis for a long-lasting finish
Markbass R500 500W Bass Amp Head Specifications:
- PowerInput impedance: 500Kohm, max. voltage: 9 VppEffect Return impedance: 33Kohm, max. voltage: 12 VppOutput Power: 300W RMS at 8 ohms, 500W RMS at 4 ohmsVoltage is factory preset for the U.S.ControlsGAIN: —80dB to +25dB rangeGROUND LIFT: Switch on rear panelMASTER VOLUMEOptional footswitch: muteEqualizationLOWCenter frequency: 80Hz; level ±12dBLOW MIDCenter frequency 400Hz, level ±12dBHIGH MIDCenter frequency 800Hz, level ±12dBHIGH3kHz shelf; level ±12dBOutputsEFFECT SENDUnbalanced, max. voltage 12 Vpp (pre-EQ)TUNER OUTUnbalanced, max. voltage 2 VppLINE OUTBalanced XLR, max. voltage 25 VppSPEAKER OUTSpeakon, 1/4" x 2OtherDimensions: 8.16"(W) x 3.39"(H) x 11.89"(D)Weight: 8.16 lbs.