Tube or solid state? This head's got 'em both.
The Markbass Little Mark tube amp head gives the warmth and richness of a tube preamp, the clean attack of a solid state preamp, or a mix of both. The bass amp head features a mix control for mixing between a solid state preamp and tube preamp. The result offers a range of sounds, from the crisp, Markbass sound in the solid state, to a heavy tube sound in the tube state, and anything in between. On the front panel there are 2 inputs with separate gain controls: one 1/4" jack, and one combo jack that accepts either an XLR or 1/4". The Vintage Loudspeaker Emulator (VLE) and Variable Preshape Filter (VPF) allow access to a wide array of timbres, from classic tones to modern hi-fi sound. A phantom power switch accompanies the XLR input, for using a microphone on a double bass. Mute control is as simple as a push and a pull on the master volume switch. The Markbass Little Mark has 4 bands of equalization, line out control, and pre/post EQ switch for the XLR out (on the rear panel). Rack ears not included. The bass amp head features a single 6205 miniature tube.
With our
Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!
Markbass Little Mark Tube Bass Amp Head Features:
- 1 1/4" input
1 XLR or 1/4" input
300W RMS @ 8 ohms, 500W RMS @ 4 ohms
Gain controls for each input
Master Volume
Line Out Level
Ground Lift switch (rear)
Pre/Post EQ switch (rear)
Mute Knob
Low, Mid, High EQ
Variable Preshape Filter
Vintage Loudspeaker Emulator
Balanced XLR line out
Markbass Little Mark Tube Bass Amp Head Specifications:
- Input 1
Impedance: 500 kOhm,
Maximum Voltage: 15Vpp
Input 2 (Balanced XLR/1/4" combo)
Impedance: 500 kOhm
Maximum Voltage: 15Vpp
Phantom power: 48V
Effect Return
Impedance: 33 kOhm,
Maximum Voltage: 10Vpp
Controls
Gain 1: -60dB to +23dB range; Gain 2: -60dB to +23dB range
Equalization
Low center frequency: 40Hz; level: ±16dB;
Low Mid center frequency: 360Hz, level: ±16dB; High Mid center frequency: 800Hz, level: ±16dB;
High center frequency: 10kHz, level: ±16dB; VPF (Variable Pre-shape Filter) center frequency: 380Hz (cut); VLE (Vintage Loudspeaker Emulator) frequency range: 250Hz-20kHz (cut)
Weight: 6.55 lb.
Dimensions: 2.8"H x 10.87"W x 10.1"D