Solid-state preamp and analog power.

The Markbass Little Mark 250 bass amp head is a high-quality bass amplifier with a solid-state preamp and an analog power amp. The Little Mark 250 delivers 250W of power into a 4 ohm cabinet, or 150W into an 8 ohm cabinet. This Little Mark has a 4-band EQ, Markbass' VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter) filters, as well as both Gain and Master volume controls. The front panel accepts both a passive or active bass 1/4" input, as well as a balanced XLR input for acoustic bass pickup systems or a microphone. On the rear panel you'll find a Neutrik Speakon combo jack output that accepts both Speakon or 1/4" speaker cable as well as a second 1/4" speaker out jack. You'll also find a balanced XLR out, unbalanced tuner out so you can tune as you play without passing your signal through pedals, and a Send and Return Effect loop which saves you from losing your signal if one of your pedals dies or a cable in the chain gives out.

With our Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!

Markbass Little Mark 250 250W Bass Head Features:

Solid state preamp analog bass head
Provides 150W RMS at 8 ohms, 250W RMS at 4 ohms
1/4" input jack works with active or passive basses
Gain and Master volume controls
Clip warning light
EQ includes controls for Low, Mid Frequency Low, High Frequency Low, and High
VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter) filters
Neutrik Speakon Combo out jacks for use with 1/4" or Speakon speaker cables
Balanced XLR out
Ground lift switch to eliminate hum
Tuner out sends unbalanced signal sent to a tuner, amp or recording equipment not needing a balanced signal
Send and Return Effect ensures main signal continues even if something dies in your effects chain
Dual-sided fiberglass PC boards with lined perforations for high-quality solder connections
Surface-mount components are silicon-sealed to isolate vibrations
Computer-grade pre-assembled ribbon connector cable harnesses and ribbons for noise-free operation
Integrated threaded posts for easy assembly/disassembly and added durability
Rigid 2mm thick aluminium chassis for a long-lasting finish

Markbass Little Mark 250 250W Bass Head Specifications:

Power
Input impedance: 500Kohm, max. voltage: 15 Vpp
Balanced input impedance: 22Kohm, max. voltage: 25 Vpp

Effect Return impedance: 22Kohm, max. voltage: 25 Vpp
Output Power: 150W RMS at 8 ohms, 250W RMS at 4 ohms
Power Requirement: 100/120V; 230V; 240V; 50/60Hz

Controls
GAIN: 80dB to +23dB range
GROUND LIFT: Switch on rear panel
MASTER VOLUME

Equalization
LOW
Center frequency: 40Hz; level ±16dB
LOW-MID
Semi-parametric: frequency 360Hz, level ±16dB
HIGH-MID
Semi-parametric: frequency 800Hz, level ±16dB
HIGH
Semi-parametric: 10kHz shelf; level ±16dB
VPF (Variable Pre-shape Filter)
Center frequency: 380Hz (cut)
VLE (Vintage Loudspeaker Emulator)
250Hz 20kHz cut

Outputs
EFFECT SEND
Unbalanced, max. voltage 20 Vpp (pre-EQ)
TUNER OUT
Unbalanced, max. voltage 25 Vpp
LINE OUT
Balanced XLR, max. voltage 10 Vpp
SPEAKER OUT
Speakon, 1/4"

Other
Dimensions: 10.87"(W) x 2.8"(H) x 10.1"(D)
Weight: 5.73 lbs.