Perfect for any bass, especially 5 and 6 stringers.

The Markbass CMD 103H is a bass combo amplifier that makes full use of its built-in Little Mark II preamp's 400 watts. The Markbass CMD 103H blows out room-rattling rhythms through three 10" B&C designed speakers. Great for any style bass playing, it's especially convenient for 5- and 6-string bassists who want an amplifier that can handle their low end without fear of distortion or other unwanted noises. The CMD 103H combo's preamp has a 4-band EQ and 2 exclusive filters to better hone your tone. Pump up the volume. The Markbass CMD 103H amp can handle it.

With our Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!

Markbass CMD 103H 400W 3x10 Bass Combo Features:

Three 10" B&C woofers
1" compression driver with custom horn
Great power-to-weight ratio
Made of high-grade, multi-ply poplar
Glued, screwed, and sealed internally with special compounds for maximum sound quality
Protected corners
Grill for protecting speakers
Lightweight
Little Mark II
Provides 500W at 4 ohm or 300W at 8 ohm
Gain and Master volume controls
Clip warning light
EQ includes controls for Low, Mid Frequency Low, High Frequency Low, and High
VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter) filters
Ground lift switch to eliminate hum
Tuner out sends unbalanced signal sent to a tuner, amp or recording equipment not needing a balanced signal
Send and Return Effect ensures main signal continues even if something dies in your effects chain

Markbass CMD 103H 400W 3x10 Bass Combo Specifications:

Speaker: 3 x 10"
Tweeter: 1" compression driver with custom horn
Bass reflex: rear
Impedance: 6 ohms
Sensitivity: 103 dB SPL
Speaker power handling: 600W RMS (AES Standard)
Amp output power: 500W at 4 ohm/300W at 8 ohm
Frequency response: 40Hz to 20kHz
Crossover Frequency: 3.5kHz
Dimensions: 23.4"W x 27.5"H x 18.9"D
Weight: 63.3 lbs.

Little Mark II head
Power
Input impedance: 500Kohm, max. voltage: 15 Vpp
Balanced Output (XLR): 22Kohm, max. voltage 25 Vpp
Effect Return impedance: 22Kohm, max. voltage: 25 Vpp
Output Power: 300W RMS at 8 ohm, 500W RMS at 4 ohm
Power requirement: 100/120V; 230V; 240V; 50/60Hz
Controls
GAIN 80 dB to +23 dB range
MASTER VOLUME
GROUND LIFT: switch on rear panel
Equalization
LOW
Center frequency: 40Hz; level ±16dB
LOW MID
Center frequency 360Hz, level ±16dB
HIGH MID
Center frequency 800Hz, level ±16dB
HIGH
10kHz shelf; level ±16dB
VPF (Variable Pre-shape Filter)
center frequency 380Hz (cut)
VLE (Vintage Loudspeaker Emulator)
frequency range 250Hz 20kHz (cut)
Outputs
EFFECT SEND
Unbalanced, max. voltage 20 Vpp (pre-EQ)
TUNER OUT
Unbalanced, max. voltage 25 Vpp
LINE OUT
Balanced XLR, max. voltage 10 Vpp
SPEAKER OUT
Speakon, 1/4"