Winner of the 2009 TEC award, the Manley Backbone Mastering Insert Switcher accepts up to three balanced source inputs, selectable on the left side. Left & right can be reversed and absolute polarity ... Click To Read More About This Product
We're sorry—we no longer carry this item.
Find a similar product below or contact us for a recommendation of a great alternative.
Winner of the 2009 TEC award, the Manley Backbone Mastering Insert Switcher accepts up to three balanced source inputs, selectable on the left side. Left & right can be reversed and absolute polarity can be flipped. The 24 position input & Output gains can be switched active or left passive. Up to eight inserts can be switched in or bypassed. A sum - Difference MS Matrix can be addressed between inserts 2 and 3. The order of inserts 4 & 5 can be swapped. The Manley Backbone Switcher has an injection point between inputs 7 & 8 to allow for several functions on the 3-Function mix - Fade output control. You can mix in the Difference signal from the input. This mixes in some out-of-phase signal from the input to the output in order to widen the image if desired or you can mix in a parallel signal in between inserts 7 & 8. A lot of folks run a reverb or parallel compressor in this fashion. Or you can use the knob as a fader to make smooth and accurate level fades with the Penny & Giles rotary fader.
This Manley Backbone comes with ELCO connectors for the INSERTS I/O. Cables sold separately.
3 x Balanced Stereo Inputs
8 x Balanced Stereo Inserts
Selected Input can be mixed to parallel outputs
Patchable SEND and RETURN
Balanced signal path all the way
Left - Right Reverse Switch
Absolute Polarity Reverse Switch
Bypass GAINS makes passive signal path
Over 90 nice relays employed
EAO switch buttons can be easily custom labeled
INPUT and OUTPUT GAINS use 4 x 24 position Grayhill switch attenuators
SUM - DIFFERENCE (MS Matrix) can be used for Inserts 2 & 3
Separate SUM and DIFFERENCE outputs available on rear panel
SWAP order button can be used to reverse the order for Inserts 4 & 5
MIX - FADE injection between 7 & 8 with mode select
Expensive Penny & Giles rotary fader/mixer
Bulletproof MANLEY build quality
Frequency Response: ±0.1 dB, 10Hz-100KHz THD + Noise @ +4 dBu input level: 0.0015% A-WGT THD + Noise @ +22 dBu input level: 0.0011% A-WGT IMD60 4:1@ +4 dBu input level: 0.0017% IMD60 4:1@+22 dBu input level: 0.0035% Crosstalk Rejection: > 95dB @ 1 kHz between Gains and Mix-Fade Stages Crosstalk Rejection: > 70db @ 1Khz at SUM-DIF stage Common Mode Rejection: > 100dB @ 100Hz; > 95dB @ 1KHz; > 80dB @ 10KHz Noise floor: -95 dBu, Bandwidth 22Hz-22KHz A-WGT Maximum Signal Level: +28dBu Dynamic Range: 124dB Input Impedance: 30K ohms Output Impedance: 150 ohms Input/Output Stepped Gain Switches accuracy: ± 0.05dB Power Consumption: 60 watts Mains Fuse: 0.5A @ 100-120VAC; 0.25A @ 220 œ 240VAC Mains Fuse type: 5mm x 20mm SLO-BLO GDC glass fuse, 250V AC rating NOTE: Operating mains voltage: Units are purpose built for original destination country's mains voltage: 100V, 120V, or 220-240VAC as indicated on the serial number badge. The power transformer in this unit must be rewired in order to change mains operating voltage. Unit Size: 19" x 10" x 3.5" (occupies 2u) Note: add 5" behind unit for cable allowance Unit Weight: 13 lbs. Shipping Weight: 19 dim. (international); 17 lbs. (USA) Shipping Box Dimensions: 23" x 15" x 9"
You are changing the Ship-To country.
Our product catalog varies by country due to manufacturer
restrictions. If you change the Ship-To country, some or
all of the items in your cart may not ship to the