A mono tube DI that is warm quiet and has a 5-position high pass shelf EQ,
The Manley Tube Direct Interface features exceptionally clean and quiet tube circuits, which will warm up any electric guitar, bass, violin, and especially those sterile sounding synths. Unique with the Manley Tube DI's is the added 5-position high pass shelf EQ, there to fight unwanted resonances. As a splitter device, the transformer-coupled balanced XLR output can be sent directly to a mic level input, such as through your console channel, while the 1/4" output drives the guitar amplifier cabinet, which can be miked and mixed with the direct feed. Low impedance outputs, Ground lift and Console Out Boost switches make the Manley tube DI box both versatile and compatible. Keep your Manley interface close at hand to get that noisy high impedance guitar cable into quiet lo-Z territory fast!
With our
Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!
Manley Tube Direct Interface - Mono Features:
- Vacuum Tube: 5751
Gain: -6dB or -26dB
Input Z: 10 Mohm to 1 Mohm
Output Z: 150 ohm xfmr
Frequency response: 12 Hz – 15KHz (-3dB)
EQ: LF rolloff -3dB points: 12, 42, 100, 250Hz
Transformer-Coupled Balanced XLR Output
Console Out Boost Switch
Ground Lift Switch
Factory set for 100V, 120V or 220-240VAC operation for original destination country's mains voltage.
Operating Mains Voltage changeable with power transformer re-wiring and fuse value change.
Mains Voltage Frequency: 50~ 60Hz
Mains power consumption Mono Tube DI:
0.050 Amps (50 milliamps = 50mA) @ 120V = 6 Watts
0.025 Amps (25 milliamps = 25mA) @ 240V = 6 Watts
Mains power consumption Stereo Tube DI:
0.0750 Amps (75 milliamps = 75mA) @ 120V = 9 Watts
0.0375 Amps (37.5 milliamps = 37.5mA) @ 240V = 9 Watts
