Skip to main content Skip to footer
Save 15% on a qualifying item of $79 or more when you call 866-498-7882. Now thru March 24.

Mackie HR626 Dual 6" 2-Way Active Studio Reference Monitor

Item #: 
  • Write a Review

The first active Mackie studio monitor with a D'Appolito woofer-tweeter-woofer design. It has one 6.7" woofer on each end of the cabinet with the dome tweeter in the center. The monitor can be set up ... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email

Recommended Products

The first active Mackie studio monitor with a D'Appolito woofer-tweeter-woofer design. It has one 6.7" woofer on each end of the cabinet with the dome tweeter in the center. The monitor can be set up vertically or horizontally, depending on the application.

The 2-way biamplified monitor implements servo-feedback circuitry and an elliptical passive radiator to achieve low distortion and extended low-frequency response similar to the HR824. The waveguide-loaded high-frequency aluminum dome tweeter provides the same crisp and evenly dispersed highs as all of Mackie's world-class reference monitors. The 5/8" internally braced MDF cabinet is extremely rigid and non-resonant.

The HR626 is the ideal monitor for those who need lots of bottom end, along with the low-level accuracy of the midrange for mixing and vocal placement. Thanks to its D'Appolito driver alignment design, the HR626 can be used in both vertical and horizontal positions. Placing the HR626 in a vertical position provides extremely accurate reference monitoring for mid- to large-sized studios. Because of its symmetrical left-right sound field, it can also be placed horizontally and used as a superior center channel in a 5.1 or 7.1 surround monitoring or home theater system.

The D'Appolito driver alignment design provides direct-center alignment of high frequencies in center channel applications and can be set up vertically or horizontally, dependent upon the application. The HR626 also features the D'Appolito crossover for proper phase response.


  • Active Electronics
  • True reference monitoring due to the flat frequency response provided by the active EQ, crossovers, time correction and phase alignment
  • Robust transducer protection against peaks, thermals, RFI and extreme overdrives
  • No outboard amplification required
  • Elliptical Passive Radiator delivers:
  • Extended low frequency response
  • Elliptical geometry makes the most of the cabinet dimensions
  • Servo Feedback Circuit:
  • Lowers the distortion in low frequency range
  • Extends the low frequency response of the woofers
  • Provides tighter mechanical control of the woofers
  • Waveguide-loaded aluminum dome tweeter
  • The tweeter provides the same high-end clarity expected in a Mackie HR monitor
  • The waveguide ensures the high frequencies will be evenly dispersed with the lows
  • The die-cast waveguide looks fabulous, babe!
  • Rear Panel Controls
  • Sensitivity controls for matching monitor levels perfectly
  • Acoustic Space filters to quickly match the monitor with your control room
  • High Frequency +/- 2dB switch to compensate for live/dead acoustic environments
  • High Pass filters accommodate use with subwoofers
  • Low-frequency driver
  • Number of drivers: 2
  • Diameter: 6.7" (170 mm)
  • Sensitivity (2.83V, 1m): 89dB SPL
  • Nominal Impedance : 8 ohms
  • Voice Coil Diameter : 1.25" (32 mm)
  • Power Handling (Long Term/Program): 50/150W
  • Frequency Range: 38Hz to 6kHz
  • Frame: Die-cast aluminum magnet: Ferrite
  • Bucking magnet (shield): Ferrite
  • High-frequency driver
  • Sensitivity (2.83V, 1m): 91dB SPL
  • Nominal Impedance : 6 ohms
  • Power Handling (Long Term/Program): 20/50W
  • Frequency Range: 1.6kHz to 22kHz
  • Diaphragm/Suspension: Aluminum/Impregnated Cloth
  • Voice Coil Diameter : 1.0 inch (25.4 mm)
  • Wave Guide
  • Frequency Response: 2.5kHz to 20kHz, ±2dB
  • Mouth Size: 6.13" diameter (156 mm)
  • Horizontal and Vertical Coverage: 120 degrees, ±10 degrees, 3kHz to 20kHz
  • Passive Radiator: 6-inch x 9-inch (152 mm x 228 mm) mass-loaded elliptical flat piston with variable thickness filleted edge rubber surround.
  • Crossover Section
  • Crossover Type: Modified Butterworth, 18dB/octave @ 1.8kHz
  • Acoustic Section
  • Free-Field Frequency Response: ±1.5dB, 42Hz to 20kHz
  • Lower cutoff frequency: -3dB @ 40Hz
  • Upper cutoff frequency: -3dB @ 22kHz
  • Sound Pressure Level at 1 meter, -7.5dBu into balanced input, 100dB SPL @ 1m
  • Maximum peak SPL per pair: 118dB SPL @ 1m
  • Maximum short term SPL on axis, half space 80Hz to 2.5kHz, 109dB SPL @ 1m
  • Residual Noise (maximum gain, 600 ohms source, 20Hz-20kHz bandwidth) : <8dB SPL @ 1m
    Rated Line Input Voltage and Power
  • Power Consumption
  • Standby mode: 12 watts
  • Quiescent (idle): 20 watts
  • Musical Program, Loud mix: 105 watts
  • Both channels driven into resistive loading to 1% clipping (LF 86 W/4 ohms source, 20Hz-20kHz bandwidth): 255 watts
  • US: 120 VAC, 60Hz
  • Europe: 240 VAC, 50Hz
  • Korea (AC Power Selector at 240V): 220 VAC, 60Hz
  • Japan (AC Power Selector at 120V): 100V, 50-60Hz
  • Rated Power (For UL-6500, CSA-E65-94, EN-60065)130 watts
  • Amplifier Section
  • Low-frequency power amplifier
  • Rated Power (at 1kHz with 1% THD): 100 watts
  • In Japan (100 VAC): 67 watts
  • Rated Load Impedance: 4 ohms
  • Slew Rate: 15V/uS
  • Distortion (THD, SMPTE IMD, DIM 100): <0.035%
    Signal-to-Noise (20Hz-20kHz, unweighted, referenced to 100W into 4 ohms): > 101dB
  • Cooling: Convection
  • Design : Monolithic IC, Class AB, Parametric Servo Feedback
  • High-frequency power amplifier
  • Rated Power (at 1kHz with 1% THD): 40 watts
  • In Japan (100 VAC): 28 watts
  • Rated Load Impedance: 8 ohms
  • Slew Rate: 15V/Us
  • Distortion (THD, SMPTE IMD, DIM 100): <0.035%
    Signal-to-Noise (20Hz-20kHz, unweighted, referenced to 40W into 8 ohms): >93dB
  • Cooling: Convection
  • Design : Monolith IC, Conventional Class AB
  • System
  • Input Type: Balanced Differential (XLR and 1/4" TRS) Unbalanced (RCA)
  • Input Impedance: 20kOhms Balanced, 10kOhms Unbalanced
  • Input Protection: RFI and Level Protected
  • Input Sensitivity: +4dBu @ 300Hz for full output
  • Maximum Input Level: +20dBu
  • Low Cut Frequency: 80Hz, 2nd Order, Butterworth
  • HF Equalization: Shelving ±2dB @10kHz
  • Acoustic Space
  • A position: -4dB @40Hz, shelving
  • B position: -2dB @ 40 Hz, shelving
  • C position: flat
  • Compressor: Independent high- and low-frequency overload detection
  • Enclosure Alignment: 6th Order
  • Over Excursion Prevention
  • 2nd Order High-Pass Filter
  • Low Line Voltage Shut Down: 67% of Nominal Line
  • Thermal Protection
  • Amplifier Shut-Down, Auto Reset
  • Muting
  • 5 seconds at turn-on
  • Signal Sense Threshold: -74dBu (0.155mV)
  • Driver Protection: Compressor with independent LF and HF overload detection
  • Dimensions: 8-4/5" (224 mm)H x 19-3/5" (498 mm)W x 12-2/5" (315 mm) Deep (including amp)
  • Weight: 31 lbs (14.1kg)
Customer Reviews

Review Snapshot

by PowerReviews

(based on 1 review)

Ratings Distribution

  • 5 Stars



  • 4 Stars



  • 3 Stars



  • 2 Stars



  • 1 Stars



Reviewed by 1 customer

Displaying review 1

Back to Top

(12 of 12 customers found this review helpful)


An "honest" reference monitor

By WhyCalvary

from Jacksonville, FL

The Mackie HR 626 reference monitor has elevated my home/project studio to a level of professionalism that I never imagined possible from a single purchase. The room that I use to mix is acoustically treated, but the monitors that I had been mixing on consistently produced mixes that did not properly translate, the Mackie's changed that overnight. I can trust that the mixes that sound great in the studio will sound great in the living room, in the car and on my MP3 player. After tracking, I would typically use headphones to clean up my recordings; these monitors make my headphones a weak alternative. I cannot say enough about these speakers they are fantastic!

Displaying review 1

Back to Top

You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.