The Mackie HR624mk2 high-resolution Active Studio Reference Monitor is the perfect alternative when space is limited. The HR624mk2 monitor offers the same design as the Mackie HR824mk2 in a more compa... Click To Read More About This Product
We're sorry—we no longer carry this item.
Find a similar product below or contact us for a recommendation of a great alternative.
The Mackie HR624mk2 high-resolution Active Studio Reference Monitor is the perfect alternative when space is limited. The HR624mk2 monitor offers the same design as the Mackie HR824mk2 in a more compact package. The new Zero Edge Baffle minimizes diffraction for a crystal clear audio image of your mix, and controls sound waves for wide, even dispersion. The Mackie HR624mk2 monitor's Acoustic Space, LF roll-off and HF controls let you easily tailor the sound to suit your space and your taste. Thanks to remarkably linear frequency response, with the HR624mk2 monitor, you always get accurate mix translation. Combine all this with superior bass extension, and the Mackie HR624mk2 monitor makes your studio's sweet spot a full-on sweet zone.
High-resolution Active studio reference monitor
Ultra-linear frequency response for accurate mix translation
6.7" high-precision, low-distortion LF transducer
1" titanium dome, ferrofluid cooled tweeter
Optimized Waveguide for wide, even sweet zone
Twin FR Series amps - 100W for LF / 40W for HF
Cast aluminum Zero Edge Baffle minimizes diffraction
Full internal damping eliminates midrange artifacts
Passive radiator provides tight, articulate bass extension down to 45Hz
Acoustic Space, LF roll-off, and HF controls
Balanced XLR, TRS, and unbalanced RCA inputs
OmniMount ready for easy wall/ceiling placement
THX pm3 certified for surround sound applications
Acoustic Section Free-Field Frequency Response: &plsumn;1.5dB, 49Hz to 20kHz Lower cutoff frequency: -3dB @ 45Hz Upper cutoff frequency: -3dB @ 22kHz Sound Pressure Level at 1 meter, -7.5dBu into balanced input: 100dB SPL @ 1m Maximum peak SPL per pair: 115dB SPL @ 1m Maximum short term SPL on axis, half space 80Hz to 2.5kHz: 106dB SPL @ 1m Residual noise (maximum gain, 600? source, 20Hz-20kHz bandwidth): < 8dB SPL @ 1m
Rated Line Input Voltage and Power: (Power consumption): Standby mode: 12 watts Quiescent (idle): 20 watts Musical Program, Loud mix: 105 watts Both channels driven into resistive loading to 1% clipping (LF 86W/4?, HF 38W/8?): 255 watts
Amplifier Section (Low-frequency power amplifier) Rated Power (at 1kHz with 1% THD): 100 watts Rated Load Impedance: 4 ohms Rated THD (1W to -1dB of rated power): 0.1 % Slew Rate: 15V/S Distortion (THD, SMPTE IMD, DIM 100): < 0.035%
Signal-to-Noise (20Hz-20kHz, unweighted, referenced to 100W into 4?): > 101dB Cooling: Convection Design: Monolithic IC, Class AB, Parametric Servo Feedback
(High-frequency power amplifler) Rated Power(at 1kHz with 1% THD): 40 watts Rated Load Impedance: 6 ohms Rated THD (1W to -1dB of rated power): 0.1 % Slew Rate: 15V/S Distortion (THD, SMPTE IMD, DIM 100): < 0.035% Signal-to-Noise (20Hz-20kHz, unweighted, referenced to 40W into 8?): > 93dB Cooling: Convection Design: Monolithic IC, Conventional Class AB
System Specifications Input Type: Balanced Differential (XLR and 1/4" TRS), Unbalanced (RCA) Input Impedance: 20 k? Balanced, 10 k? Unbalanced Input Protection: RFI and Level Protected Maximum Input Level: +20dBu Low Frequency Filter: 80Hz, 2nd Order, Butterworth HF Equalization: Shelving ±2dB @ 10kHz Acoustic Space: (A position) -4dB @ 50Hz, shelving, (B position) -2dB @ 50Hz, shelving, (C position) Flat
(Compressor) Independent high and low-frequency overload detection Enclosure Alignment: 6th Order Over Excursion Prevention: 2nd Order High-Pass Filter Low Line Voltage Shut Down: 60% of Nominal Line Thermal Protection: Amplifier Shut-Down, Auto Reset Muting: 5 seconds at turn-on Signal Sense Threshold: -74dBu (0.155 mV) Driver Protection: Independent LF and HF Detection, Overall Compression
Passive Radiator: 6" x 9" (152mm x 228mm) mass-loaded elliptical flat piston with variable thickness filleted-edge rubber surround Crossover Type: Modified Linkwitz-Riley, 24dB/octave @ 3kHz
Enclosure Materials and Construction: 3/4" (19mm) thick MDF cabinet construction with internal bracing to add to cabinet stiffness Piano-black gloss finish Die-cast aluminum exponential wave guide for controlled, wide dispersion from high-frequency driver and Zero Edge Baffle to minimize diffraction around the cabinet edges Open cell adiabatic "foam fill" acoustical damping material absorbs internal reflections, preventing delayed sound coloration Flush-mount connector system allows monitor to be placed against a wall without need for connector clearance
You are changing the Ship-To country.
Our product catalog varies by country due to manufacturer
restrictions. If you change the Ship-To country, some or
all of the items in your cart may not ship to the