Mackie DFX6/Harbinger 121M & 151 PA Package  

Item #: 
130103812766414450
  • Write a Review

The Mackie DFX6 / Harbinger HX151 & HX121 Package includes all the equipment you need in a PA System: the Mackie DFX6 6x2 Mixer, two Harbinger HX151 15" 2-Way Speaker Cabinets, two Harbinger HX121M 12... Read More

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Recommended Products
Overview

The Mackie DFX6 / Harbinger HX151 & HX121 Package includes all the equipment you need in a PA System: the Mackie DFX6 6x2 Mixer, two Harbinger HX151 15" 2-Way Speaker Cabinets, two Harbinger HX121M 12" Stage Monitors, QSC RMX1450 Power Amp, QSC RMX2450 Power Amp, dbx 215 Dual 15-Band Graphic EQ, AKG D 9000 Dynamic Microphone, two ProLine Speaker Stands, four 25' Live Wire 12-Gauge Speaker Cables, ProLine Tripod Boom Microphone Stand, and three 20' Live Wire Microphone Cables.

Mackie DFX6 6x2 Mixer

The Mackie DFX6 6x2 Audio Mixer with EFX is quiet, user-friendly and affordable. It offers 6 input channels (2 mono mic/line and 2 mono mic/stereo line); low-noise, high-headroom mic preamps with +50dB gain range and switchable phantom power on channels 1 and 2; 32-bit EMAC digital EFX processor with 16 effects; 5-band stereo graphic equalizer with 12dB boost/cut; 2-band channel strip shelving EQ; 75Hz low-cut filters and inserts on channels 1 and 2; tape and CD inputs and tape output; vocal eliminator; break switch for playing music between sets; and lots more.

Harbinger HX151 Speaker

The Harbinger HX151 Speaker Cabinet has a 15" loudspeaker featuring a 2.5" high-temperature, precision edge-wound polyamide voice coil and an 80 oz. magnet structure. High Frequencies come through loud and clear with a 1.75" titanium diaphragm compression driver (1" exit) coupled to a constant directivity horn with 90 x 40 degree coverage. The speaker has an on-board crossover that offers a 12dB/octave network and features high quality, low-loss components with Inaudible Protection Circuitry (IPC) preventing diaphragm failure at maximum SPLs.

Harbinger HX121M 12" Stage Monitor

12" loudspeaker featuring a 2.5" high-temperature, precision edge-wound polyamide voice coil and an 80 oz. vented magnet structure. High Frequencies come through loud and clear with a 1.75" titanium diaphragm compression driver (1" exit) coupled to a constant directivity horn with 40 degrees (H) x 90 degrees (V) coverage angles. The built-in crossover has a 12dB/octave network features high quality, low-loss components.

QSC RMX1450 Power Amp

The QSC RMX1450 Power Amp combines rugged high-output design with the latest circuit technology to deliver unmatched performance at a breakthrough price. The RMX amps require only 2 rack spaces and feature 1/4" TRS, XLR, and barrier strip balance inputs; binding post and Neutrik Speakon outputs; front-mounted gain controls for easy access; independent and defeatable clip limiters; selectable low-frequency filters (30Hz or 50Hz) that protect speakers and increase headroom; signal and clip LED indicators; independent DC and thermal overload protection on each channel; variable-speed fan. All include a 3-year warranty. Stereo: 280W @ 8 ohms, 450W @ 4 ohms, and 700W @ 2 ohms. Bridge mono: 900W @ 8 ohms, 1,400W @ 4 ohms.

QSC RMX2450 Power Amp

In the QSC RMX2450 Power Amplifier, QSC has combined their rugged high-output designs with the latest circuit technology to deliver unmatched performance at a breakthrough price. The RMX amps require only 2 rackspaces and feature 1/4" TRS, XLR, and barrier strip balanced inputs; binding post and Neutrik Speakon outputs; front-mounted gain controls for easy access; independent and defeatable clip limiters; selectable low-frequency filters (30Hz or 50Hz) that protect speakers and increase headroom; signal and clip LED indicators; independent DC and thermal overload protection on each channel; variable-speed fan. All include a 3-year warranty. Stereo: 500W @ 8 ohms, 750W @ 4 ohms, and 1,200W @ 2 ohms. Bridge mono: 1,500W @ 8 ohms, 2,400W @ 4 ohms.

dbx 215 Dual 15-Band Graphic EQ

The dbx 215 Dual 15-Band Graphic EQ was designed to be simple to use yet meet the demands of professionals. Dual channels, 15 - 2/3-octave bands, ISO frequency centers, ±12dB input gain range, and switchable 50Hz/12dB per octave low-cut filters. In addition ” 20mm faders, selectable ±6 or 12dB boost/cut range, XLR and 1/4" TRS connectors, balanced inputs and outputs, and chassis/signal ground lift capabilities for hum isolation. 108dB of dynamic range, internal toroidal transformer, a front-panel bypass switch, and 4-segment LED ladders. You get uncompromised cutting-edge performance, entry-level simplicity, and an affordable price. Single rackspace.

AKG D 9000 High Performance Dynamic Microphone

The AKG D 9000 High Performance Dynamic Mic is designed for instrumental/vocal performance. The wide frequency response is slightly boosted in the mid- and high-frequency ranges for a crisp instrumental sound and for better vocal intelligibility.

You get outstanding performance with the AKG Varimotion diaphragm technology in this mic and a frequency-independent cardioid pickup pattern that provides very effective feedback suppression. Doubleflex shockmounted transducer system reduces handling noise. Includes microphone clip.

ProLine Speaker Stand

The Proline tripod speaker stand features a center steel shaft for maximum support and an aluminum body for lighter weight. Locking pins are included for extra safety. 150-lb. capacity. Fits 1.375" or 1.5" speaker mounts. Height adjusts from 45"-73".

Live Wire Speaker Cable

Live Wire cables have the strength and durability to withstand more than everyday use. Superior wiring allows your signal to be quiet, eliminating frustrating hums, buzzing, and crackles. Flexible design eliminates kinks and twists for in the cable for a tangle-free performance whether you're in the studio or on the stage. These 25' 12-Gauge speaker cables feature Neutrik Speakon to Speakon connectors.

ProLine Tripod Boom Microphone Stand

The ProLine Tripod Boom Microphone Stand safely and securely maintains the position you set for your microphone to capture the perfect sound -- in the studio or during live performance. Stand features die-cast metal clutches and non-skid legs that keep the stand where you set it. Boom adjusts from 1" - 23". Height adjusts 40" - 67".

Live Wire Microphone Cable

These Lo-Z rubber mic cables are 20'long and have XLR male to XLR female connectors. Live Wire microphone cables are for serious-minded musicians who know that good cable means good sound. Live Wire cables feature superior wiring for enhanced signal and performance. They are strong, durable, and quiet.

Features
  • Mackie DFX6 6x2 Mixer
  • 6 input channels (2 mono mic/line and 2 mono mic/stereo line)
  • Low-noise, high-headroom mic preamps with +50dB gain range and switchable phantom power on channels 1 and 2
  • 32-bit EMAC digital EFX processor with 16 effects
  • 5-band stereo graphic equalizer with 12dB boost/cut
  • 2-band channel strip shelving EQ
  • Tape and CD inputs and tape output
  • 75Hz low-cut filters and inserts on channels 1 and 2
  • Vocal eliminator function
  • Break switch for playing music between sets
  • Input trim controls with LED level set indicators
  • Separate aux send and effects send for each channel
  • 2 stereo aux returns
  • Master aux monitor, effects send, and CD/tape return faders
  • Headphone output with separate rotary level control
  • Balanced/unbalanced XLR and 3/4 main stereo inputs
  • Rugged all-metal chasis
  • Built-in power supply
  • Harbinger HX151
  • Power Handling): 300W RMS; 600W peak sine; 1200W peak program
  • Frequency Response: 45 Hz ” 19 kHz
  • Nominal Impedance: 8 Ohms
  • Sensitivity (1w, 1m): 98 dB
  • Max SPL: 128 dB
  • 15" woofer with 2.5" high-temperature voice coil and 80 oz. magnet
  • 1.75: titanium diaphragm compression driver with 1" exit
  • 90 degrees (horizontal) x 40 degrees (vertical) horn
  • On-board crossover that offers a 12dB/octave network
  • Mounting Cup for Speaker Stand
  • Recessed handles
  • Heavy duty metal grille
  • Carpet covering
  • Warranty: 2 Years
  • Harbinger HX121M
  • Power Handling (RMS): 250 Watts
  • Power Handling (Peak Sine): 500 Watts
  • Power Handling (Peak Program): 1000 Watts
  • Frequency Response: 50 Hz ” 19 kHz
  • Nominal Impedance: 8 Ohms
  • Sensitivity (1w, 1m): 97 dB
  • Max SPL: 127 dB
  • Warranty: 2 Years
  • QSC RMX1450 Power Amp
  • Stereo power 280W @ 8 ohms, 450W @ 4 ohms, and 700W @ 2 ohms
  • Bridge power 900W @ 8 ohms, 1,400W @ 4 ohms
  • 1/4" TRS, XLR, and barrier strip balanced inputs
  • Binding post and Neutrik Speakon outputs
  • Front-mounted gain controls for easy access
  • Independent and defeatable clip limiters
  • Selectable low-frequency filters (30Hz or 50Hz)
  • Signal and clip LED indicators
  • Independent DC and thermal overload protection
  • Variable speed fan
  • Require 2 rackspaces
  • Three year warranty
  • QSC RMX2450 Power Amp
  • Stereo power 500W at 8 ohms, 750W at 4 ohms, and 1,200W at 2 ohms
  • Bridge power 1,500W @ 8 ohms, 2,400W @ 4 ohms.
  • 1/4" TRS, XLR, and barrier strip balanced inputs
  • Binding post and Neutrik Speakon outs
  • Front-mounted gain controls
  • Defeatable clip limiters
  • Low-frequency filters
  • Signal and clip LEDs
  • Independent DC and thermal overload protection
  • Variable speed fan
  • Require 2 rackspaces
  • Three year warranty
  • dbx 215 Dual 15-Band Graphic EQ
  • 2 - 15-band, 2/3-octave Constant Q frequency bands
  • Switchable boost/cut ranges of ± 6 or ±12dB
  • 12dB per octave, 3dB down @ 50Hz low-cut filter
  • Front-panel bypass switch
  • ±12dB input gain range
  • 4-segment LED ladders for monitoring output levels
  • XLR and TRS inputs and outputs
  • Internal toroidal transformer
  • Frequency response of 50kHz
  • Dynamic range greater than 108dB
  • AKG D 9000 High Performance Dynamic Microphone
  • Response tailored for vocal and instrumental onstage performance
  • High-output neodymium transducer with wide 80Hz-20kHz response
  • Frequency-independent cardioid pattern for added immunity to feedback
  • Low handling noise through use of AKGs Doubleflex anti-vibration isolation system
  • High sensitivity (2.0 mV/Pa) resulting from use of high-energy neodymium-iron boron magnet
  • Lightweight die-cast metal body with dark matte finish
  • Spring steel dent-resistant windscreen
  • Customer Reviews
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.