Accidental damage, normalNormal wear and power surges are no longer an issue with these comprehensive and affordable plans. We even pay to ship your gear for repairs. More details.
Covers much more than the original manufacturer's warranty:
Damage due to unexpected and unintentional spills, drops and impacts
Damage due to normal wear and tear
Damage caused by lightning/power surge
Damage due to dust, internal heat, humidity, heavy usage
No Lemon Policy on merchandise over $200- if it fails for the same reason 3 times, it is replaced on the 4th breakdown
Complete refund in the event of failure or substandard performance on merchandise under $200 (Gift Certificate sent for the full price plus applicable sales tax paid)
Manufacturer's Specs Coverage -- The product does not need to fail to be covered. If the product does not perform as it did the first day you bought it, we will repair or replace it so that it does
Free shipping to and from repair facility
Plans are transferable in the event merchandise is sold
Limit of Liability: The least of the cost of (1) authorized repairs, (2) replacement with a product of similar features, (3) reimbursement for authorized repairs or replacement or (4) the price that you paid for the product.
*Limitations and exclusions apply. See terms and conditions for program details
Designed by the same team that produced Mackie's best-selling compact active loudspeakers, the Thump TH-15A Active Loudspeaker provides amazingly accurate response from 20kHz down to 40Hz, giving it just the right amount of punch.
Exceptional Sonic Performance
TH-15A Active loudspeakers put out a tremendous amount of sound for their size and price tag. The two-way bass reflex (ported) design generates ample quantities of chest-pounding bass, and its 1" compression driver ensures smooth, wide dispersion. There is even a 3-band equalizer at the input to give you all the tonal control you could ever want, with an available 15dB boost or cut at 80Hz (for the lows), 100Hz to 8kHz (sweepable mids) and 12kHz (for the highs). With the TH-15A speaker's extremely versatile EQ, you can add some extra thump to that kick drum, bring out the sizzle in your hi-hats and add pop to vocals.
More Than Just a Powered Speaker Cabinet Sure, the TH-15A has a built-in power amp--it has two of them, 150 watts for the 15" woofer and 50 watts for the HF horn. New Class D circuitry drives the woofer more efficiently with less heat byproduct than the competition's speakers. But so much more goes into an Active loudspeaker design than just amplifiers. The Active crossover divides the frequencies, time aligns the signals for proper reproduction and sends them to the appropriate drivers; active compression provides protection for the drivers, and thermal circuitry protects the amplifiers. All the onboard electronic systems work together dynamically to produce superior quality sound previously unavailable in this price range.
Portability Meets Versatility Not only is the TH-15A a superb PA enclosure, it also makes a superior monitor wedge--just lay the asymmetrical cabinet on its side and turn it up. Its compact, lightweight design means zero strain, whether mounting it on a high pole or loading up the van. The TH-15A loudspeaker's wide frequency response makes it ideal as a keyboard, vocal or even bass guitar monitor. The TAPCO TH-15A has incredibly smooth, spike-free response and dispersion over a wide range of treble frequencies, so you can crank it without the fear of ear-splitting high-end feedback.
Protecting Your Investment Because you probably push your loudspeakers really hard for long periods of time, some extra circuitry was added to keep your TH-15As performing at their best. You can run them to clipping without fear of thermal damage. Things can get pretty hot in the real world, so if the electronics do overheat, separate thermal switches activate and shut down the high and/or low frequency amplifiers until they cool down. Each driver has its own transparent compression circuit, which helps protect them from damaging transient peaks. An over-excursion filter, inserted just before the low frequency amplifier, protects the woofer from bottoming-out when the low-end is driven to the maximum. These extra protections ensure long life and loudspeakers you can count on.
Includes: Pair of Musician's Friend Standard Speaker Stands (see SKU#451036) and Gear One XLR cables - 20 feet each (see SKU#339877).
Mackie Thump TH-15A Pair
Features:
Acoustic Performance Frequency Range (-10 dB): 40 Hz — 20 kHz Frequency Response (-3 dB): 50 Hz — 18.5 kHz Horizontal Coverage Angle: 90° Vertical Coverage Angle: 60° Maximum SPL Long-Term: 113 dB SPL @ 1m Maximum SPL Peak: 116 dB SPL @ 1m
Input/Output Input Type: Female XLR Balance/Unbalanced Input Impedance: 20 kOhms balanced bridging; 10 kOhms unbalanced Loop-through: Male XLR Balanced/Unbalanced (parallel with input) Level Control: Rotating knob, 0 dB at center Sensitivity: +4 dBu for full output (Level Control @ center); -36 dBu for full output (Level Control @ max)
Transducers Low Frequency: 15" (381mm) with steel frame, paper cone woofer High Frequency: Horn loaded 1" (25mm) exit compression driver.
Power Amplifiers
Low Frequency Power Amplifier: Rated Power: 150 Watts, 8-ohm load, 182 watts peak THD: <0.1% Signal-to-Noise Ratio: >-94 dB, 20 Hz to 20 kHz, unweighted, referenced to 138 watts into 8 ohms Design: BTL Class D
High Frequency Power Amplifier Rated Power: 50 watts, 4-ohm load, 60 watts peak THD: <0.1% Signal-to-Noise Ration: >-97 dB, 20 Hz to 20 kHz, unweighted, referenced to 50 watts into 4 ohms Design: Class AB
Equalization Low Frequency EQ: ±15 dB @ 80 Hz, shelving Mid Frequency EQ: ±15 dB, bandpass, sweepable from100 Hz to 8 kHz High Frequency EQ: ±15 dB @ 12 kHz, shelving Direct/EQ Switch: Bypasses EQ section
Protection Features Over-excursion Protection: Second-order sub-sonic filter Thermal Protection: Independent amplifier shutdown, auto reset Driver Protection: Independent HF and LF compressors
AC Power Requirements U.S.: 120 VAC, 60 Hz Europe: 240 VAC, 50 Hz Korea: 220 VAC, 60 Hz Japan: 100 VAC, 50/60 Hz AC Connector: 3-pin IEC 250 VAC, 20 A male Fuse: 115 VAC: T 3.15 AL/250 V; 230 VAC: T 2 AL/250 V Power Consumption: 320 watts with music, loud mix; 20 watts quiescent (idle)
Construction Features Basic Design: Asymmetrical Trapezoidal Material: Polypropylene Finish: Textured Handles: One on each side, one on top Grille: Perforated metal with weather-resistant coating Display LEDS: Front: Power ON; Rear: Power ON, OL (overload)
Dimensions: 27.1"H x 16.8"W x 11.7"D (689x427x296mm) Weight: 36 lbs. (16.3 kg) Mounting Methods: Pole-mountable via the built-in socket on the bottom of the cabinet. Be sure the pole is capable of supporting the weight of the TH-15A
Mackie Thump TH-15A Pair
Specifications:
Acoustic Performance Frequency Range (-10 dB): 40 Hz — 20 kHz Frequency Response (-3 dB): 50 Hz — 18.5 kHz Horizontal Coverage Angle: 90° Vertical Coverage Angle: 60° Maximum SPL Long-Term: 113 dB SPL @ 1m Maximum SPL Peak: 116 dB SPL @ 1m
Input/Output Input Type: Female XLR Balance/Unbalanced Input Impedance: 20 kOhms balanced bridging; 10 kOhms unbalanced Loop-through: Male XLR Balanced/Unbalanced (parallel with input) Level Control: Rotating knob, 0 dB at center Sensitivity: +4 dBu for full output (Level Control @ center); -36 dBu for full output (Level Control @ max)
Transducers Low Frequency: 15" (381mm) with steel frame, paper cone woofer High Frequency: Horn loaded 1" (25mm) exit compression driver.
Power Amplifiers
Low Frequency Power Amplifier: Rated Power: 150 Watts, 8-ohm load, 182 watts peak THD: <0.1% Signal-to-Noise Ratio: >-94 dB, 20 Hz to 20 kHz, unweighted, referenced to 138 watts into 8 ohms Design: BTL Class D
High Frequency Power Amplifier Rated Power: 50 watts, 4-ohm load, 60 watts peak THD: <0.1% Signal-to-Noise Ration: >-97 dB, 20 Hz to 20 kHz, unweighted, referenced to 50 watts into 4 ohms Design: Class AB
Equalization Low Frequency EQ: ±15 dB @ 80 Hz, shelving Mid Frequency EQ: ±15 dB, bandpass, sweepable from100 Hz to 8 kHz High Frequency EQ: ±15 dB @ 12 kHz, shelving Direct/EQ Switch: Bypasses EQ section
Protection Features Over-excursion Protection: Second-order sub-sonic filter Thermal Protection: Independent amplifier shutdown, auto reset Driver Protection: Independent HF and LF compressors
AC Power Requirements U.S.: 120 VAC, 60 Hz Europe: 240 VAC, 50 Hz Korea: 220 VAC, 60 Hz Japan: 100 VAC, 50/60 Hz AC Connector: 3-pin IEC 250 VAC, 20 A male Fuse: 115 VAC: T 3.15 AL/250 V; 230 VAC: T 2 AL/250 V Power Consumption: 320 watts with music, loud mix; 20 watts quiescent (idle)
Construction Features Basic Design: Asymmetrical Trapezoidal Material: Polypropylene Finish: Textured Handles: One on each side, one on top Grille: Perforated metal with weather-resistant coating Display LEDS: Front: Power ON; Rear: Power ON, OL (overload)
Dimensions: 27.1"H x 16.8"W x 11.7"D (689x427x296mm) Weight: 36 lbs. (16.3 kg) Mounting Methods: Pole-mountable via the built-in socket on the bottom of the cabinet. Be sure the pole is capable of supporting the weight of the TH-15A
You must be logged in to write a review. Please click here to login.
Browse similar items:
Product Details
Customer reviews
Price
You are currently viewing the Printable Version of this page. Click here to return
to the Regular Version.
866-498-7882
Available in Stores
For your convenience, our online inventory has been expanded to include items in
our retail locations. Some items may be fulfilled from Guitar Center retail stores*.
Items will be inspected to ensure the store has the product you want, in the condition
you expect. If not, a store manager will contact you by phone or email within one
hour.
*Select items are available for in store pick-up only
