The Lynx AES16-SRC offers excellent AES/EBU channel capacity and routing flexibility in a single PCI card. The AES16-SRC also gives you 8 channels of onboard sample rate conversion. With support for u... Click To Read More About This Product
We're sorry—we no longer carry this item.
Find a similar product below or contact us for a recommendation of a great alternative.
The Lynx AES16-SRC offers excellent AES/EBU channel capacity and routing flexibility in a single PCI card. The AES16-SRC also gives you 8 channels of onboard sample rate conversion. With support for up to 16 channels of input and output at sample rates up to 192kHz, the Lynx AES16 turns your computer into a powerful digital router or patchbay with extensive flexibility and minimal cabling. Most importantly, the AES16-SRC supports the emerging single-wire 192kHz standard and is compatible with existing dual-wire AES/EBU devices. Install up to 4 Lynx AES16-SRC cards in a single computer.
Lynx includes 2 CBL-AES1604 cables with the AES16-SRC. The 6' cables feature 110-Ohm shielded twisted cabling. Each has 26-pin, high-density male D-sub to 4 female XLR (AES inputs), 4 male XLR's (AES outputs), and 2 female BNC's (word clock I/O).
16-channel AES/EBU digital I/O
192kHz / 24-bit single-wire and dual-wire modes
8 channels of sample rate conversion
SynchroLock jitter attenuation
Word clock and multi-card synchronization
Powerful mixing and routing engine
Low-latency drivers for Windows and Macintosh
General PCI Bus: Version 2.2 compliant Data Transfers: Up to 132 MBps using custom 16-channel zero-wait state, scatter-gather DMA engine Bus mastering supported Size: 5.0"H X 7.4"W X 0.75"D (half-size PCI card)
Digital I/O Number/Type: 8 stereo inputs and 8 stereo outputs, 24-bit AES/EBU format, transformer coupled Channels: 16 in/out in single-wire mode Sample rates: All standard rates and variable rates up to 192kHz in both single-wire and dual-wire modes Sample rate conversion: 8 channels available with support for conversion ratios up to 8:1, Dynamic range: 142dB, Multiple-input SRC phase matching
Architecture Core: FPGA-based core contains custom PCI interface, data routing and formatting, device control, digital mixing, clock routing and control, and a DMA engine; 256KB of onboard RAM for data buffering; support for field upgrades of firmware Audio devices: Card is visible to host applications as 8 record devices and 8 play devices (Each device has two channels and can be used independently for multi-client functionality)
Clocking Sources: Digital inputs 1-4, external word clock (with XLR cables only) on BNC, internal word clock on header, onboard low-jitter crystal oscillator SynchroLock: Multi-stage, VCXO-based clock generation system with high jitter attenuation (Wide mode tracks off-frequency clocks, narrow mode generates ultra-low jitter output for standard frequencies)
Onboard digital mixer Type: hardware-based, low latency Routing: Ability to route any input to any or multiple outputs Mixing: up to four input or playback signals mixed to any output, 40-bit precision Status: peak levels to -114dB on all inputs and outputs
LStream expansion ports Compatibility: Supports Lynx LStream expansion cards including the LS-ADAT 16-channel ADAT I/O card Type: High-speed serial, up to 16 channels @ 24-bits on 14-pin internal connector
Connections I/O ports: Two bracket-mounted 26-pin high-density female D-sub connectors (Can be configured to support eight channel or four channel AES connections) External clock: 75-Ohm BNC word clock input and output provided on XLR cable set Internal clock: Two 75-ohm board-mounted 2-pin headers for word clock input and output
Software Windows Drivers: for Windows 2000 / XP platforms: MME, ASIO 2.0, WDM, DirectSound, Direct Kernel Streaming, and GSIF Macintosh Drivers: CoreAudio for OSX Mixer Application: multi-window GUI provides complete control of digital mixer and all hardware settings