4-channel USB audio/MIDI interface with dbx preamps, Lexicon reverb, and more.

Brilliantly designed, the I-ONIX U42S recording interface from Lexicon fits where it makes the most sense, between your keyboard and monitor. Lexicon understands you care passionately about your music, and that it's more than just a pastime, which inspired them to create the I•ONIX U42S, putting all monitor and input level controls at your fingertips.

Featuring dbx microphone preamps on every channel, the I•ONIX series recording interfaces are more than equipped to provide professional recordings that keep your music sounding its best. The preamps run on a high-voltage supply to guarantee stability and provide you with a superior recording across a wide dynamic range. Performance driven A/D - D/A converters ensure pristine 24-bit/96kHz audio to capture every subtle detail of your performance.

The included Pantheon II VST/AU reverb plug-in features 6 reverb types with 16 adjustable parameters, as well as 35 factory presets that range from Vocal to Live Sound and Special Effects. It's easy to complete your mix and make your music sound its best with these exquisitely rich, full reverbs that have made Lexicon famous.

Also included with the Lexicon U42S is a software suite featuring Steinberg's Cubase LE4 and Toontrack EZdrummer Lite.

With our Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!

Lexicon IONIX U42S Desktop IO 4X2 with USB 2.0 Features:

USB 2.0 connection to DAW—up to 480Mbps
44.1 to 96KHz sample rates, 24-bit resolution
4 Analog 1/4" and XLR combi-jack inputs on the rear panel for mic/line inputs
Record up to 6 sources at once
2 Analog 1/4" TRS (Stereo Main) outputs
dbx high-voltage, ultra-low noise mic preamp's on all analog mic/line inputs (4 total)
2 Hi-Z instrument inputs
Supports Windows and Mac platforms
48V phantom power for each input pair
Input signal metering via 8 LED's per channel
Signal mixing and stereo bus signal metering
2 1/4" high-output
headphone connections
MIDI In/Out
S/PDIF I/O
Zero-latency monitoring
Low-latency ASIO drivers
Lexicon Pantheon II VST/AU reverb plug-in
Software suite includes Steinberg's Cubase LE4, and Toontrack
EZdrummer Lite

Lexicon IONIX U42S Desktop IO 4X2 with USB 2.0 Specifications:

Microphone Inputs: Female XLR Pin 2 Hot
Input Impedance: 3k balanced
Phantom Power: +48 Volts
Maximum gain: +55dB
E.I.N. (at max gain): 127dB @ 55dB gain typical (150 source), 130dB @ 55dB gain typical A-weighted (150 source)
Maximum Input Level: +8dBu
Frequency Response: +/ 1.5dB, 20Hz-20kHz
THD+N: <0.02%, 20Hz-20kHz, <0.002%, 1kHz, -6dBu
Line Inputs: 1/4" TRS balanced or unbalanced
Input Impedance: 20k balanced, 13k unbalanced
Maximum Input Level: +18dBu
Frequency Response: +/ 1.5dB, 20Hz-20kHz
THD+N: <0.02%, 20Hz-20kHz, <0.002%, 1kHz, +18 dBu
Instrument Input: 1/4" TS unbalanced
Input Impedance: 1M
Maximum Input Level: +10dBu
Frequency Response: +/ 2.5 dB, 20Hz-20kHz
THD+N: <0.08%, 1kHz, +4dBu
Line Outputs: 1/4" TRS balanced or unbalanced
Level: +18dBu maximum
Impedance: 32 Balanced, 16 Unbalanced
Headphone Output: 1/4" stereo jack 250mW per channel at 50
MIDI Interface: 5-pin DIN connectors for MIDI in and MIDI out
Sample Rate: 44.1, 48, 88.2, or 96kHz (determined by computer application)
Dynamic Range: A/D (24 Bit) 108dB typical, A-weighted, 20HZ-20kHz
D/A (24 Bit) 110dB typical, A-weighted, 20Hz-20kHz
A/D/A (24 Bit) 106dB typical, A-weighted, 20Hz-20kHz
Power requirements: Power adaptors for 100 240 VAC, 50/60Hz, 15W