4-channel USB audio/MIDI interface with dbx preamps, Lexicon reverb, and more.
Brilliantly designed, the I-ONIX U42S recording interface from Lexicon fits where it makes the most sense, between your keyboard and monitor. Lexicon understands you care passionately about your music, and that it's more than just a pastime, which inspired them to create the I•ONIX U42S, putting all monitor and input level controls at your fingertips. Featuring dbx microphone preamps on every channel, the I•ONIX series recording interfaces are more than equipped to provide professional recordings that keep your music sounding its best. The preamps run on a high-voltage supply to guarantee stability and provide you with a superior recording across a wide dynamic range. Performance driven A/D - D/A converters ensure pristine 24-bit/96kHz audio to capture every subtle detail of your performance. The included Pantheon II VST/AU reverb plug-in features 6 reverb types with 16 adjustable parameters, as well as 35 factory presets that range from Vocal to Live Sound and Special Effects. It's easy to complete your mix and make your music sound its best with these exquisitely rich, full reverbs that have made Lexicon famous. Also included with the Lexicon U42S is a software suite featuring Steinberg's Cubase LE4 and Toontrack EZdrummer Lite.
With our Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!
Lexicon I-ONIX U42S USB 2.0 Audio/MIDI Interface Features:
- USB 2.0 connection to DAW—up to 480Mbps44.1 to 96KHz sample rates, 24-bit resolution4 Analog 1/4" and XLR combi-jack inputs on the rear panel for mic/line inputsRecord up to 6 sources at once2 Analog 1/4" TRS (Stereo Main) outputsdbx high-voltage, ultra-low noise mic preamp's on all analog mic/line inputs (4 total)2 Hi-Z instrument inputsSupports Windows and Mac platforms48V phantom power for each input pairInput signal metering via 8 LED's per channelSignal mixing and stereo bus signal metering2 1/4" high-outputheadphone connectionsMIDI In/OutS/PDIF I/OZero-latency monitoringLow-latency ASIO driversLexicon Pantheon II VST/AU reverb plug-inSoftware suite includes Steinberg's Cubase LE4, and ToontrackEZdrummer Lite
Lexicon I-ONIX U42S USB 2.0 Audio/MIDI Interface Specifications:
- Microphone Inputs: Female XLR Pin 2 HotInput Impedance: 3kO balancedPhantom Power: +48 VoltsMaximum gain: +55dBE.I.N. (at max gain): 127dB @ 55dB gain typical (150O source), 130dB @ 55dB gain typical A-weighted (150O source)Maximum Input Level: +8dBuFrequency Response: +/ 1.5dB, 20Hz-20kHzTHD+N: <0.02%, 20Hz-20kHz, <0.002%, 1kHz, -6dBuLine Inputs: 1/4" TRS balanced or unbalancedInput Impedance: 20kO balanced, 13kO unbalancedMaximum Input Level: +18dBuFrequency Response: +/ 1.5dB, 20Hz-20kHzTHD+N: <0.02%, 20Hz-20kHz, <0.002%, 1kHz, +18 dBuInstrument Input: 1/4" TS unbalancedInput Impedance: 1MOMaximum Input Level: +10dBuFrequency Response: +/ 2.5 dB, 20Hz-20kHzTHD+N: <0.08%, 1kHz, +4dBuLine Outputs: 1/4" TRS balanced or unbalancedLevel: +18dBu maximumImpedance: 32O Balanced, 16O UnbalancedHeadphone Output: 1/4" stereo jack 250mW per channel at 50OMIDI Interface: 5-pin DIN connectors for MIDI in and MIDI outSample Rate: 44.1, 48, 88.2, or 96kHz (determined by computer application)Dynamic Range: A/D (24 Bit) 108dB typical, A-weighted, 20HZ-20kHzD/A (24 Bit) 110dB typical, A-weighted, 20Hz-20kHzA/D/A (24 Bit) 106dB typical, A-weighted, 20Hz-20kHzPower requirements: Power adaptors for 100—240 VAC, 50/60Hz, 15W