Skip to main content Skip to footer
Save 15% on a qualifying item of $79 or more when you call 866-498-7882. Now thru March 24.

More Info About Free 2-Day Standard Ground Shipping

Close Window
Top Seller

Lace Alumitone Deathbucker Pickup Black

Item #: 
1274115044218   POS #:110317666
  • Write a Review

Using patented and patent pending Lace "current driven" technology, the Deathbucker was designed for high output with a heavy metal drive. Extreme output with thunderous bottom end, yet crisp highs al... Click To Read More About This Product

Available 04-10-2018 You will not be charged until order ships. Email me when this is in stock.

Gear returned in mint condition. If you're looking for a virtually new instrument in possibly less-than-perfect packaging, this is a great value.
  • Includes 45-Day, No-Hassle Returns
  • Includes full manufacturer's warranty
Gear returned in great condition, with only minor signs of use, such as slight scuffs or pick marks. It looks and plays like new and may be considered an equivalent to display units found in retail stores.
  • Includes 45-Day, No-Hassle Returns
  • Includes full manufacturer's warranty
+ Add to Wish List
Ship to Store Available in: 3-7 Days (estimated) Fairfax, VA View More Stores For Availability Store Information


Connect with an expert instantly.

Call us: 866-498-7882

  • Free Shipping
  • International Shipping
  • Easy Returns

Using patented and patent pending Lace "current driven" technology, the Deathbucker was designed for high output with a heavy metal drive. Extreme output with thunderous bottom end, yet crisp highs allow the player the most versatile of high output pickups. "This passive design yields active pickup performance with absolutely zero noise and no need for a battery" states Jeff Lace. "In split mode, the unique Alumitone design is dead quiet with full range" further stated Lace.

Another Deathbucker advantage is there is no volume drop in split mode and working as a single coil; noise is virtually eliminated in comparison to standard old style humbucker designs.

Deathbuckers are compatible with all guitars and other pickups. As an easy drop in replacement, the 4 conductor design needs only 250k pots. It is excellent for any playing situation from live to direct to board recording.


Pickguard Note: Alumitones require a rectangular cutout, simple modification is usually required.
5-position switch
Position: neck, mid, bridge
DC Resistance: 2.5k ohms
Peak frequency: 2343 Hz
Inductance: 3.0 henries
Customer Reviews

Review Snapshot

by PowerReviews
LaceAlumitone Deathbucker Pickup

(based on 6 reviews)

Ratings Distribution

  • 5 Stars



  • 4 Stars



  • 3 Stars



  • 2 Stars



  • 1 Stars



Reviewed by 6 customers

Displaying reviews 1-6

Back to Top

(13 of 13 customers found this review helpful)


Clean and Powerful

By Ryan Paxton

from Cincinnati, OH

Comments about Lace Alumitone Deathbucker Pickup:

I was a little skeptical about buying these pickups, however, I decided to make the plunge. I did not want active pickups, but I wanted a powerful sound. So I went on a limb when buying these, since there are hardly any reviews out there for them. Appeal: I knew they would look sexy upon installing them into my 1982 Washburn Tour 24 guitar. The dark brushed metal goes well with my black guitar. Installation: The wiring diagram was slightly confusing at first, but I decided to not split the coils. The wires that come with them are plenty long, so you definitely won't have any trouble covering the distance inside your guitar's body. Hardware: Solid construction, these things are thin! It honestly feels just like a thin metal bar with wires underneath, but they are strong. Very durable. I will say that one of my favorite features of these pickups was the lack of springs. They give you a rubber tube to compress around your install screws rather than a spring, which makes it much cleaner, sturdier, and balanced. When you compress them, they bulk up and give you columns for support rather than thin screws. Sound: Powerful. I've never heard anything as loud as these pups. They are passive and yet when I set my volume to 1/10, they rock my whole house. To achieve the same volume, I had to crank my amp up to a 4/10 on my Seymour Duncans. The tone is mellow and crisp. It isn't bright and warm, rather, it's a cold, chilling sound. Sounds very much like Explosions in the Sky without using any FX pedals. When hooking them up to an FX pedal, however, the possibilities are endless. I mean, really, these pups brought life back into my guitar and my pedals. Cons: The only downsides, really, are if you want a warm sound, it can be hard to achieve, and if you're short on cash, these could be too steep. Conclusion: You will get what you pay for if you are looking for an icy tone. They make me want to play my guitar again and experiment with different FX. Thank you Lace Alumitone!

(6 of 6 customers found this review helpful)


Suitable for any style

By Jared Beaman

from Atlanta, GA

Comments about Lace Alumitone Deathbucker Pickup:

After looking at many demos and reading about them, I figured I wouldn't truly understand the extent of this pickup until I had run it through my set up. I only had enough money to buy one for my bridge, but it blends perfectly well with my EMG-HZ. Eventually I'm sure to replace that with another Deathbucker, or alumitone. The cleans are super crisp, and respond well to any effect you throw at them. You won't be let down. As for overdrive and distortions, I would describe the sound as a high quality, well mixed, guitar quality. Because of which, this leaves very little room for error in rhythm because there is no hint of cloudiness, even with high gain. It looks great in my Jackson, and seems to be pretty solid. I've had it in for a day now, and due to my desire to put my bridge pickup ridiculously close to the strings, the very edge of it has slightly lost the black coating. It's only been one day and that's happened. Quite irritating, but when I noticed, I lowered it enough to be out of string's reach, and the tone was not effected by the lowering, so I'm content. It feels great to play on, and responds to every whim, and any style I tried. I don't recommend this if you are going to play on a small/cheaper amp. It's overbearingly strong, and weak amps can not contain it. Hard rock, heavy metal, metal, punk, reggae, ska, jazz, funk, fusion, progressive rock, post rock. Don't let the name "Deathbucker" trick you into thinking it's only for the heavier of genres. It's suitable for any style.

(5 of 5 customers found this review helpful)


Best metal pickup ever!!!!!


from Tacoma,WA

Comments about Lace Alumitone Deathbucker Pickup:

I have tried nearly every off the shelf pickup for metal in the last 10 years. This is my new favorite. I slapped this pup in my Jackson Ps3-t (Basically an RR3 made in 93) and it brings a wall of sound incomparable to anything I've ever heard. To my ears its as if you took the mid range crunch of EMGs, the screaming squeals and harmonics of the Dimebucker, and the sustain of a Dimarzio!! Not to mention these are super quiet and are the most feedback resistant pickups I've played. Chord definition is amazing too. No joke, these will be the only pickups I will buy from now on!

(4 of 4 customers found this review helpful)


Top of the line upgrade


from Olmsted Falls, OH

Comments about Lace Alumitone Deathbucker Pickup:

I researched this pickup, extensively. I decided to throw one into my Squier fat stratocaster. The sound quality is nothing short of amazing! It rivals and surpasses ANY active pickup for gain, punch, articulation and clarity (within a chord.)I wired it with a push/pull pot for splitting to single coil. It gives me a nice, vintage strat sound with absolute silence! No 60Hz hum at all! I would recommend this pickup to anyone who plays, blues, rock, metal. You will be satisfied, to say the least! \m/

(4 of 4 customers found this review helpful)


Bold sound for a bold design!!!

By Nicholas Woody

from Burlington Wisconsin

Comments about Lace Alumitone Deathbucker Pickup:

The Alumitone series has always had my curiosity. I play mainly metal, and i wanted something that would give my guitar a really sick tone and be all there. I knew i wanted a Dimebucker in the neck position.(kinda an experiment really) So i bought the Deathbucker for the bridge and i couldnt be happier. The guitar is an Epiphone goth v with a floyd rose. I really wanted to see how this pickup worked with a trem, and to be honest we all know how well a dimebucker goes with one. All and all my experiment was a success and this guitar is rocking now. Sweet crisp highs, and the lows are nice and chunky but not dirty at all. It doesnt matter too much what you do with this pickup it will meet your needs. work the cash!!!!!!


I'd buy another

By Big d rockin

from Glenvil, Nebraska

About Me Experienced


  • Easy To Use
  • Functional
  • Good Quality
  • Improves Sound


    Best Uses

    • Concerts
    • Practicing

    Comments about Lace Alumitone Deathbucker Pickup:

    The old pups on my Gibson branded SG Jr. were sounding flat and I wanted something that wasn't an active pup and decided to give one of these a try. All I can say is WOW. Why didn't I put one of these on sooner ! The website made wiring simple since I didn't split it but the tone of the guitar is now incredible. I don't have to do a lot of tweaking with my processor to make it growl with intensity to play rhythm or scream intensly for the occasional lead on it. I would recommend this pup for a guitar that has a bridge only configuration if you are looking for a good overall use.

    Displaying reviews 1-6

    Back to Top

    You are changing the Ship-To country.

    Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.