Skip to main content Skip to footer
Special markdowns, shop now

Kustom KPA100 PA Package

Item #: 
  • Write a Review

The Kustom KPA100 is a complete PA system package that combines the KPM 4100 Powered Mixer with 2 KSC 10 speaker enclosures.Kustom KSC 10 speaker cabinets deliver high performance in a smaller-sized ... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email

Recommended Products

The Kustom KPA100 is a complete PA system package that combines the KPM 4100 Powered Mixer with 2 KSC 10 speaker enclosures.

Kustom KSC 10 speaker cabinets deliver high performance in a smaller-sized format. They provide a heavy-duty Kustom 10" PA speaker combined with a high frequency driver. The result is a full, rich low end and clear, present highs. As with all Kustom cabinets, they're built to last thanks to Kustom's time-tested construction methods, a tough vinyl covering, oversized handles, and corner protectors‚ÄĚplus they're stand-mountable.

The Kustom KPM4100 Powered Mixer delivers true versatility, performance, and power in a compact and economical package. It houses its high-technology electronics in a rugged steel chassis and is protected by a vinyl-covered wooden cabinet. Many features you would only expect to find in more expensive mixers are incorporated in the Kustom KPM mixer: balanced microphone inputs with low-noise preamps, carbon film potentiometers, tape inputs and outputs, and high-quality digital effects with a 100W power amplifier.

The typical uses for powered mixers can be strenuous. Setup, tear down, packing and unpacking, patching and un-patching can take their toll on a mixer. Since 1966, Kustom has been building some of the most rugged amplifiers in the industry and the KPA100 PA has been designed to carry on that tradition.

Many manufacturers design products for the perfect world rather than for the real world. The real world has shorted speaker cables, defective speakers, misconnections, and improper impedances. The KPA100 is designed to be tolerant of the imperfect world. With this product, Kustom delivers an amplifier that ramps up to power within 4 seconds and checks to make sure there are no problems before it allows power to be delivered to the outputs. Also, it will check to see if there are thermal (heated) or short circuits. If it detects a thermal situation, the Kustom mixer will shut itself off until the heat dissipates. If it detects a short circuit, it will continue to pass a signal but it will cause the short circuit protection to engage so that the unit will shut down until the problem is corrected.


Kustom KPM 4100 Mixer:
  • 100W RMS
  • Automatic amplifier self-shut off when overheating is detected
  • Automatic short circuit protection
  • 9 total inputs including 4 balanced microphone inputs
  • 4 high impedance microphone inputs and a Tape/CD input
  • All inputs may be used simultaneously
  • Built-in effects with individual control on each channel
  • Line out for connection to external amplifiers
  • Record out jack for taping performances
  • Tape inputs and outputs
  • RF interference protection on all inputs and outputs
  • Balanced microphone inputs with low-noise preamps
  • Carbon film potentiometers
  • Rugged steel chassis
  • Vinyl-covered wooden cabinet
Kustom KSC 10 Speakers:
  • 60Ws RMS handling
  • Heavy-duty Kustom 10" PA speaker
  • High Frequency Driver
  • Tough vinyl covering
  • Oversized handles
  • Corner protectors
  • Perforated grill
  • Vinyl-covered wooden cabinet
  • Stand-mountable
KPM 4100:
  • RMS Wattage: 100 Watts
  • Channels: 4
  • Microphone Input: 4 Balanced XLR
  • Phantom Mic Power: Yes
  • Line Level Input: 4
  • EQ: Per Channel
  • Master EQ: 5-Band
  • Effects: Analog Reverb/Echo
  • Record Out: Left & Right Jacks
  • C D/Tape/iPod Input: with Volume Control
  • Dimensions: 4.8" H x 18.3" W x 9.8" D
  • Weight: 22 lb.
KSC 10:
  • Power Handling: 60W RMS (root mean square); 120W Peak
  • Speaker: 10"
  • Frequency Response: 75Hz-18kHz
  • Sensitivity: 93db
  • Impedance: 8 Ohms
  • Horn Type: High Frequency Driver
  • Handles: Yes
  • Dimensions: 19" H x 12-1/2" W x 9-1/2" D
  • Weight: 17.7 lb.
Pro Coverage
Manufacturer's Warranty
3 year parts and labor warranty on all amps, PAs, and speakers, including speaker cabs.

  • Customer Reviews

Review Snapshot

by PowerReviews

(based on 1 review)

Ratings Distribution

  • 5 Stars



  • 4 Stars



  • 3 Stars



  • 2 Stars



  • 1 Stars



Reviewed by 1 customer

Displaying review 1

Back to Top

(5 of 14 customers found this review helpful)


Great System for the money

By Rick

from Plymouth, IN

I saw this system on line at a great price.. I then went to the Guitar Center and they matched the price and ordered it for me. I received the unit in two days and am very pleased with both the Guitar Center and the Kustom system. A great system at a great price.

Displaying review 1

Back to Top

You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.