The Kustom Profile 100 Portable PA system is a 4-channel system that combines quality performance and convenient features, all in a highly transportable package. You'll find that the Profile 100 PA sy... Click To Read More About This Product
The Kustom Profile 100 Portable PA system is a 4-channel system that combines quality performance and convenient features, all in a highly transportable package. You'll find that the Profile 100 PA system works well in a variety of environments, amplifying vocals, instruments, keyboards, drum machines, audio devices, and more. It has 4 XLR inputs, 4 Mic/Line 1/4" inputs, and an integrated 4-channel mixer with delay/reverb effect. It also comes with Record Out RCA jacks, Playback In RCA jacks, as well as an Insert TRS jack for placing an external effect or EQ between the mixer's preamp output and power amp input. The Profile 100 PA system offers 100W of output power at 4Î and includes 2 - 6" speakers.
4 XLR inputs designed for low-impedance microphone or equipment that has a mic-level, balanced output
4 Mic/Line 1/4" inputs may be used to connect high-impedance mics, keyboards, drum machines, and other audio devices
Volume control per channel
Tone control per channel to emphasize bass or treble
Effects control per channel to decrease/increase the prominence of the reverb/delay effect in mix
Stereo RCA output jacks to connect external recording device
Playback In RCA jacks to connect external audio device such as an MP3, CD player, or computer for playback
Insert TRS jack for placing an external effect or EQ between the mixer's preamp output and power amp input
Master section including Master Volume, Bass, Mid, Treble, Playback Level, Effects Master controls
Power light indicator
Included speaker connect to the rear panel
Output Power 5% THD: 100W (4Î load), 75W (8Î load)
Ch 1-4 (Mic XLR Balanced, Line 1/4" Balanced/Unbalanced)
Playback: RCA Line Level Stereo, mixed mono
20HZ-20kHz: Actual response is tailored to speaker cabinet for accurate acoustical response
Hum & Noise:
-65dB: Residual Noise, all level controls 0% (minimum)
-50dB: Nominal System Noise, all level controls at 50%
System Gain (Measurements made at 1kHz):
+75dB - Mic to Speaker Output (Ch 1-5)
+60dB - Line to Speaker Output (Ch 1-5)
+35dB - Playback to Speaker Output
+50dB - Mic to Preamp Output (Insert Ring)
+50dB - Mic to Record out
+25dB - Power amp in (Insert Tip) to Speaker Output
Channel EQ (Tone): 1-band 1.5kHz and above, ±12dB low frequencies not affected
Master EQ (Bass, Mid, Treble): 200Hz and below, 1.5kHz centered, 4kHz and above, ±12dB
Phantom power: +15V mic inputs (Ch 1-5)
Power requirements: USA/Canada 120VAC/60Hz, 160W nominal
Dimensions (HxWxD): 305mm x 218mm x 218mm, 12" x 8.6" x 8.6"
Weight: 6.2kg, 13.7lb.
Speakers: 1 X 6-1/2" 50W 8Î
Horn: 5"x2" fair with piezo driver
Power capacity: 50W each cabinet RMS, 100W each cabinet Peak
Frequency response: 60HZ-20kHz Usable response
Nominal impedance: 4Î
Dimensions (HxWxD): 305mm x 218mm 218mm, 12" x 8.6" x 8.6"
Weight: 4.8kg, 10.6lb.
Guitar Center's Pro Coverage
Pro Coverage gives you added warranty protection for your gear. Stepping in where the manufacturer's "normal wear and tear" coverage ends, our Pro Coverage program offers you upgraded coverage if your product ever fails Click To Read More About This Product.
Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.