collapse expand iconDescription

This special live sound kit features a pair of Kustom KPC10M Monitor Speaker Cabinets, a Phonic MAX 1000 Power Amplifier, and a pair of Gear One Speakon to 1/4" cables to hook them up. The combination is designed to make it easier to hear yourself through the mix whether you're recording or performing.

Kustom KPC15M
The Kustom KPC15M 15" Monitor Speaker Cabinet with Horn is crisp, with plenty of low end. Specially voiced crossover ensures clear separation of frequencies for clean, full-range reproduction. A 15" woofer delivers deep, rumbling low frequencies, while a 7" x 15" horn (with overload protector) produces bright high-end tones. Other features include 2 parallel input jacks, and sturdy construction with reinforced corners and heavy-duty Tolex covering. It offers 30, 60, and 90 positioning.

Phonic MAX 1000 Power Amplifier
The Phonic MAX 1000 Power Amplifier delivers 600 Watts of power at 8 ohms (bridge mono), 300W of power at 4 ohms (stereo)-ideal for small- to medium-size venues like churches, auditoriums, and more. Input to the MAX 1000 is achieved via XLR or phone jack, and output is achieved through either Speakon-type connectors or binding posts. The MAX 1000 features ground switches, and the option to choose between stereo, parallel and bridge operating modes, making it an affordable amplifier that is exceptional for real-world application.

Gear One Speakon to 1/4" cable
This 16-gauge speaker cable is 25 feet in length and features a Speakon connector on one end and a 1/4" connector on the other.
Kustom PA KPC15M / Phonic MAX 1000 Spkr & Amp Package
Kustom PA KPC15M / Phonic MAX 1000 Spkr & Amp Package
Kustom PA KPC15M / Phonic MAX 1000 Spkr & Amp Package

collapse expand iconFeatures

Kustom KPC15M
  • 15" woofer for bass that rumbles
  • 7" x 15" horn for shimmering highs
  • Specially voiced internal crossover provides superb separation of frequencies
  • Rubber strap handle
  • 1-3/8" polemount
  • 30, 60, and 90 positioning
  • Tolex covered cab
Phonic MAX 1000 Power Amplifier
  • High-current toroidal transformers for greater power and low noise
  • Balanced 1/4" TRS and XLR inputs for maximum flexibility
  • Grounding / Floating switch to avoid grounding loop
  • Binding post and Speakon-type outputs
  • Front mounted gain controls for easy access
  • Signal and Peak LED indicators to monitor performance
  • Short circuit, thermal, subsonic, RF protection, output DC offset
  • Power on/off muting
warning

WARNING: This product can expose you to chemicals including Diisononyl phthalate (DINP), which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

collapse expand iconSpecs

Phonic MAX 1000 Power Amplifier
    Stereo Mode:
    • 200W @ 8 ohms EIA, 1kHz
    • 300W @ 4 ohms EIA, 1kHz
    Bridge Mono Mode:
    • 600W @ 8 ohms EIA, 1kHz
    • Total Harmonic Distortion: 0.1%
    • Output circuitry: Class H
    • Input Sensitivity @ 8 ohms: 1.23V (+4dBu)
    • Distortion (SMPTE-IM): <0.01%
      Noise (unweighted 20Hz - 20 kHz below rated output): 100dB
    • Damping Factor: >300 @ 8 ohms
    • Frequency Response: 20 Hz-20kHz, +0/-1dB points: 5Hz-50kHz
    • Input Impedance: 20 kOhm balanced, 10kOhm unbalanced
    • Cooling: Continuous variable-speed fan, front-to-rear air flow
    • Input: XLR and 1/4" TRS
    • Output: Speakon and binding posts
    • LED Indicators: Blue Power, Green Signal, Red Peak
    Controls:
    • Front Panel: CH1 and CH2 GAIN knobs with 41 detents
    • Rear Panel: Parallel, Bridge, and Stereo Operation Mode side switches, floating on/off switch, and Current-Break reset button
    • Protection Circuitry: Short circuit, thermal, subsonic, RF, output DC offset, power on/off muting
    • Power Consumption: 600W
    • Power Requirement (depends on region): 100120VAC, 220240VAC, 50/60Hz
    • Dimensions: 19" W x 3.46" H x 15.9" D
    • Weight: 33lb.