Don't see the deal you want? Call Now. 1-866-498-7882 or Chat Now

Item # 486078

Print this page

  1. Select the information you'd like to print out.
  2. Cancel
Kustom PA Profile 200 Portable PA System Blemished - Like New
Use Add to Cart below to have it shipped to you, or to a store near you.
  • Store
  • Availability
Pickup In Store

Portable PA system with integrated 200W (at 4Ω) 5-channel mixer and 2 x 6.5" speakers.

The Kustom Profile 200 Portable PA system is a 5-channel system that combines quality performance and convenient features, all in a highly transportable PA package. You'll find that the Profile 200 works well in a variety of environments, amplifying vocals, instruments, keyboards, drum machines, audio devices, and more. The Kustom PA system has 5 XLR inputs, 5 Mic/Line 1/4" inputs, and an integrated 6-channel mixer with delay/reverb effect. It also comes with Record Out RCA jacks, Playback In RCA jacks, as well as an Insert TRS jack for placing an external effect or EQ between the mixer's preamp output and power amp input. The Kustom Profile 200 PA system offers 200W of output power at 4Ω and includes 2 - 6-1/2" speakers.

Kustom PA Profile 200 Portable PA System Features:

  • 5 XLR inputs designed for low-impedance microphone or equipment that has a mic-level, balanced output
    5 Mic/Line 1/4" inputs may be used to connect high-impedance mics, keyboards, drum machines, and other audio devices
    Volume control per channel
    Tone control per channel to emphasize bass or treble
    Effects control per channel to decrease/increase the prominence of the reverb/delay effect in mix
    Stereo RCA output jacks to connect external recording device
    Playback In RCA jacks to connect external audio device such as an MP3, CD player, or computer for playback
    Insert TRS jack for placing an external effect or EQ between the mixer's preamp output and power amp input
    Master section including Master Volume, Bass, Mid, Treble, Playback Level, Effects Master controls
    Power light indicator
    Included speaker connect to the rear panel

Kustom PA Profile 200 Portable PA System Specifications:

  • Mixer
    Output Power 5% THD:
    85W using one output jack, 8Ω load
    120W using one output jack, 4Ω load
    150W using both output jacks, 8Ω per jack
    200W using both output jacks, 4Ω per jack
    Accepted inputs:
    CH 1-5: Mic XLR balanced, line 1/4" balanced/unbalanced
    Playback: RCA Line Level Stereo, mixed mono
    Frequency response: 20HZ-20kHz (Actual response is tailored to speaker cabinet for accurate acoustical response)
    Hum & Noise:
    -65dB: Residual Noise, all level controls 0% (minimum)
    -50dB: Nominal System Noise, all level controls at 50%
    System Gain (Measurements made at 1kHz)
    +75dB: Mic to speaker output (CH 1-5)
    +60dB: Line to speaker output (CH 1-5)
    +35dB: Playback to speaker output
    +50dB: Mic to preamp output (Insert Ring)
    +50dB: Mic to record out
    +25dB: Power amp in (Insert Tip) to speaker output

    Channel EQ (Tone): 1 band 1.5kHz and above ±12dB Low frequencies not affected
    Master EQ (Bass, Mid, Treble): 200Hz and below, 1.5kHz centered, 4kHz and above, ±12dB
    Effects: Reverb
    Phantom Power: +15V Mic inputs (Ch 1-5)
    Power requirements: USA/Canada 120VAC/60Hz, 400W nominal
    Dimensions (H x W x D): 320mm x 226mm x 250mm, 12.6" x 8.9" x 8.9"
    Weight: 7.8kg, 17.2lb.

    Speaker Cabinets
    Speakers: 2 X 6-1/2" 50W 8Ω
    Horn: 5"x2" fair with piezo driver
    Power capacity: 100W each cabinet RMS, 200W each cabinet Peak music Power
    Frequency response: 50HZ-20kHz
    Nominal impedance: 4Ω
    Dimensions (Per cab) (HxWxD): 478mm x 226mm x 250mm, 18.8" x 8.9" x 8.9"
    Weight: 8kg, 17.6lb.

Voice your opinion! Be the first to review »
Questions about the Profile 200 Portable PA System (486078)

PO Box 4769
Westlake Village, CA 91359
Order #: (if applicable)  * Denotes Required Field
*First Name:
*Last Name:
Click to add file attachment
File Upload 5mb limit