[[KeywordSearchInputContent]]

Free Shipping to store or home

Item # 300222 | Customer Ratings: Ratings ( 4 Based on 3 reviews)

Print this page

  1. Select the information you'd like to print out.
  2. Cancel
Kluson KR3 Keystone Guitar Tuning Machines - 3 On a Rail
Use Add to Cart below to have it shipped to you, or to a store near you.
Close
  • Store
  • Availability
Guaranteed Lowest Price
Pickup In Store
GC Shopping Cart
 Cart Contents
Qty Description Price Shipping Subtotal 
      Kluson KR3 Keystone Guitar Tuning Machines - 3 On a Rail (300222)
Availability:  


TonePros Kluson KR3 guitar tuning machines apply the tuner improvement technology of the 33 Series to the vintage 3 on a rail format. Typically you'll find this type of tuner on older '50s classic instruments such as Juniors or Specials. R3 series tuners utilize the classic white round plastic button. For years, many have sung the praises of having the row of 3 tuners connected to the back of the headstock for added resonance transfer. TonePros enhances this tradition with a solid baseplate for each row of 3 tuners.

Completely sealed, these tuning machines feature all titanium internal components and a 16:1 gear ratio. 12/64" shaft size. Retrofit your vintage guitar with no modification.

Kluson KR3 Keystone Guitar Tuning Machines - 3 On a Rail Features:

  • 3 on a rail
    Completely sealed
    All titanium internal components
    No guitar modification


Kluson KR3 Keystone Guitar Tuning Machines - 3 On a Rail Specifications:

  • 16:1 gear ratio
    12/64" shaft size


Product Reviews
(Based on 3 reviews)
Sort reviews:
Viewing Reviews 1 - 3 of 3
  • Very Nice, Slight Modification Required

    As reviewed by Jim on 6/26/2014

    I have a 1950 Gibson J-45 with original tuners and I tried to get as close to those as possible. I got them in and they looked perfect, however I ran into an issue when I tried to put them on my headstock. The holes (screws and pegs) are identical, but there is about a 1/4" lip on the rail around the pegs that require a slight widening of the holes on the rear of the headstock to allow the rail to seat flush on the headstock. I carefully drilled out the holes just a bit and they fit and work perfectly. This mod is completely invisible due to the rail, but you should know it must be done to mount tuners this model guitar. I was able to leave the brads in place on the face of the headstock as it is all a perfect fit with the slight mod. The new tuners have made this old favorite guitar a reliable instrument once again!

    1 of 1 people found this review helpful.
    Was this review helpful?
  • Nice!

    As reviewed by Bill Harris on 7/29/2013

    I had Tom at Local Music in Salt Lake ream the holes a bit but well worth it! They tune up nice and smooth. 59' Gibson LG zero sounds great!

    1 of 1 people found this review helpful.
    Was this review helpful?
  • Great Product but modification was needed to get them to fit properly!

    As reviewed by Brett on 4/29/2011

    I have a 1948 Gibson J-50 with non-original tuners on it so I knew I needed these to get as close to the original as possible. I got them in and they looked to be perfect, however I ran into an issue when I tried to put them on my headstock. There is a lip which you cannot see on the one picture they show at all. The lip makes them to wide to fit through the holes in the headstock. I carefully had to round out the holes quite a bit for these to be able to fit. Once I got them on and put new strings on my guitar, my baby sung! It is a great product but you will need to modify your guitar more than likely.

    1 of 1 people found this review helpful.
    Was this review helpful?
Questions about the KR3 Keystone Guitar Tuning Machines - 3 On a Rail (300222)


To: GuitarCenter.com
PO Box 4769
Westlake Village, CA 91359
USA
866-498-7882
 
Order #: (if applicable)  * Denotes Required Field
*First Name:
*Last Name:
*Email:
Phone:
*Subject:
*Message:
Click to add file attachment
File Upload 5mb limit