Home > Pro Audio > Signal Processors > Microphone Preamps > Joemeek twinQ Dual Channel EQ/Compressor/Mic Preamp

Joemeek twinQ Dual Channel EQ/Compressor/Mic Preamp

This Item requires building a kit.
Please start below


Details 1  2 

Add to Wishlist
GUARANTEED LOWEST PRICE:
$949.99
MSRP: $1,099.99   Save $150.00 (13%)

Includes a Rebate!


Download Rebate PDF


Includes Rebates!

Download Rebates

PREORDER NOTE: We will not charge your credit card until your merchandise ships; however, we will place a temporary hold for the purchase price in order to reserve your item.

In Stock Online

Online Only Item

Free Shipping!

Note: This is a Manufacturer's Refurbished item.

Note: Returns on this item are subject to special conditions

Product Availability
In Stock In Stock On Order On Order Not In Stock Not In Stock
Option/Style Online
Standard
Product Specific Media
Product Specific Media
Manual for Joemeek twinQ Dual Channel EQ/Compressor/Mic Preamp

General Media

An all-in-one processor with that gorgeous, fat Meek tone.

The Joemeek twinQ takes microphones or instruments, amplifies them, compresses them, and equalizes them so they're ready to be recorded. Simple to use yet extremely powerful, the twinQ will bring out the best in any microphone or instrument and give the gloss of a professional studio production to all your performances. You'll find it useful for recording as well as for live work.

Joemeek twinQ Dual Channel EQ/Compressor/Mic Preamp Specifications:

  • Input impedances: Mic: 1.2kOhm; Line: 20kOhm
  • Preamp overall gain: 0dB to 60dB
  • Common mode rejection: 70dB
  • Equivalent input noise: -128.5dBu (unweighted)
  • Distortion: 0.001% (below Compressor threshold)
  • Frequency response: 10Hz to 70kHz (-3dB)
  • Maximum input before clipping: Mic: +21dBu; Line: +45dBu
  • Headroom before clipping: +21dBu
  • Compressor threshold: -6dBu to +22dBu (variable)
  • Compressor ratio: 1:1 to 10:1 (variable)
  • Compressor attack time: 1 msec to 100 msec (adaptive)
  • Compressor release time: 0.1 sec to 3 sec (adaptive)
  • Nominal output levels: +4dBu/-10dBv
  • Output impedance: 75 ohm
  • Output Level switch: 12dB attenuation
  • Noise Floor: -85dBu (typical, with ~40dB mic gain)
  • VU Meter: Analogue movement
  • Power supply: 115V / 230V ac mains, 50/60Hz
  • Power consumption: 30W
  • Mechanical: 482W x 88H x 220D (overall)
  • Weight: 3 kilos
  • High Pass Filter: 12dB per octave cut below 80Hz
  • EQ Boost & Cut: +/-15dB (zero phase-shift bell response)
  • LF Frequency : 40Hz to 650Hz variable
  • MID Frequency : 300Hz to 5kHz variable
  • HF Frequency : 6kHz/12kHz switchable

With our 30/30 Guarantee on most products, you can be assured of complete satisfaction and the lowest available price, or your money back!
Voice your opinion! Write a review now »