The JRX112Mi is an economical, suspendable, twelve-inch, two-way speaker system designed for installation where ground stacking or pole mounting is impractical or undesirable. If your speaker needs to... Click To Read More About This Product
Find a similar product below or contact us for a recommendation of a great alternative.
Call: 866-498-7882 Email
The JRX112Mi is an economical, suspendable, twelve-inch, two-way speaker system designed for installation where ground stacking or pole mounting is impractical or undesirable. If your speaker needs to fly, this is the one.
JBL 12 in low frequency driver with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more cross- sectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling.
Ferro-fluid cooled compression driver with titanium diaphragm improves high frequency performance as well as system reliability.
The advanced network topology crossover design shapes frequency response and delivers coherent summation in the crossover region.
High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.
Progressive Transition highfrequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.
The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance.
SonicGuard protects the highfrequency driver from excess power without interrupting the performance.
Attractive 18-gauge perforated, steel grille protects components from damage.
Cabinet is fitted with three M10 threaded suspension points.
Rigging hardware kit containing three 10 mm forged shoulder eyebolts with washers is included.
Power Rating: 250 W / 1000 W
Frequency Range: 60 Hz - 16 kHz (-10 dB)
Dimensions (H x W x D): 22.7" x 15.7" x 12.8"
Frequency Response: 70 Hz - 12 kHz (±3 dB)
Nominal Impedance: 8 ohms
Sensitivity: 99 dB SPL (1w/1m)
Recommended Amplifier Power: 250 W to 500 W into 8 ohms
Maximum SPL: 129 dB
Nominal Dispersion: 90º x 50º
Crossover Frequency: 1.8 kHz
Weight: 19.5 kg (43 lb)
High Frequency Driver: JBL 2412 1 in exit compression driver mounted on Progressive
Low Frequency Driver: JBL M112-8
Input Connectors: Neutrik Speakon NL-4 (x1); .25 in
Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.