The Control SB210 provides low frequency reinforcement for a wide variety of sound system applications. Its compact size, high output and outdoor-capable design makes it one of the most versatile subw... Click To Read More About This Product
The Control SB210 provides low frequency reinforcement for a wide variety of sound system applications. Its compact size, high output and outdoor-capable design makes it one of the most versatile subwoofers in the installation market.
The internal angled baffle allows for a large port opening and compact front dimensions without compromising driver size. The SB210 produces warm, punchy low-end sound.
The Aluminum/Ceramic Composite Diaphragm 10" Drivers are rated for pink noise power handling of 200 watts each, providing 400 watts (1600-watt peaks) of system power handling. The network receives a stereo or mono source, and sends a high-passed 4-ohm or 8-ohm satellite output signal for operation with other Control loudspeakers. ATC-210T-SAT network can be used in same manner when using a 70.7/100-volt distributed signal line.
Included with the SB210 are four feet and four receptacles to allow floor and shelf mounting as well as reliable stacking of multiple units. The thirteen M6 insert points allow for installation using forged shoulder eyebolts for suspending the subwoofer. The optional U-Bracket MTC-210UB allows for additional versatility in mounting. The thermoset composite-coated grille stands up to UV as well as humidity and direct exposure to water. The grille is backed with a combination of materials that, while acoustically transparent, prevent the intrusion of water into the cabinet even when hit directly, such as from rain or a sprinkler.
10" (2x250mm) Aluminum/Ceramic Composite Cone Drivers
400 Watts Power Handling
Fully Outdoor Capable Design
SonicGuard Overload Protection
13 x M6 Suspension Inserts, Including Inserts for Optional U-Bracket
Compact, Low-Profile Design
Frequency Range (-10 dB): 42 Hz - 200 Hz
Frequency Response (-3 dB): 48 Hz - 120 Hz
Power Capacity: 800 Watts Continuous Program Power, 400 Watts Continuous Pink Noise
Nominal Sensitivity(half-space, averaged 60 Hz to 80 Hz): 95 dB, 1W @ 1m in half-space (2 pi loading), Max SPL @ 1m3: 122 dB (in half-space)
Nominal Impedance: 8 Ohms
Minimum Impedance: 7 Ohms at 100 Hz
Low Frequency: 10" (2x250mm) dia., 2" (50 mm) edge-wound ribbon voice coil, Aluminum/Ceramic Composite cone.
Enclosure Material: High Impact PolyStyrene (HIPS) w/internal 8 mm polyurethane co-mold
Grille: Thermoset composite-coated steel, multi-layer
Overload Protection: SonicGuard
Environmental: IEC 529 IP-X5 rating. Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-STd-202F for salt spray
Termination: Screw-down terminal strip, zinc-plated copper base, nickel-plated metal screws/washers. Accepts up to 9 mm outside, 4 mm inside open lug (#6, #8 or #10 lug), plus bare wire (up to 12 AWG/2.5mm)
Dimensions: 14"H x 23.3"W x 22.5"D (355x590x570mm)
Net Weight (each): 38 lbs. (17.1 kg)
Shipping Weight (each): 43 lbs. (19.4 kg)
Included Accessories: 1 pc MTC-PC4 input panel cover, 4 pcs MTC-210FT floor
standing foot, 4 pcs MTC-210RT foot receptacle for stacking
Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.