This JBL speaker system comes with 5 LSR6325P satellite speakers and a LSR6312SP subwoofer.
The satellites have 5-1/4" woofers and high-frequency transducers driven by 100W/50W respectively. The 12" subwoofer has a 250W amp.
Very flat frequency response is achieved through special technologies that compensate for problems in the mix environment. Linear Spatial Reference technology ensures smooth and accurate mid- and high-frequency content at the mix position, and a boundary compensation setting corrects spectral shift and assures a flat response when wall-mounted or placed on a surface. Monitors are equipped with balanced +4dBu XLR and unbalanced -10dBV RCA inputs and have a front-panel power switch and volume control.
The LSR6312SP speaker uses a 250W continuous-power amp to power its 12" subwoofer with JBL's patented Neodymium Differential Drive NDD. An integral bass-management system provides all the features you need for multiformat surround production including: LCR and Direct LFE inputs, summed output for chaining multiple subwoofers, -4dB alignment setting, and JBL's RMC (Room Mode Correction) system. The RMC Calibration Kit is included.
The LSR6325P speaker systems:
100W RMS amplifier powers a 5-1/4" woofer
50W RMS powers high frequency transducer
Cast aluminum enclosure
Very flat frequency response
Linear Spatial Reference technology ensures smooth and accurate mid and high-frequency content at the mix position
User selectable boundary compensation settings correct spectral shift and assure a flat response when speakers are mounted on wall or set on a working surface
High pass filtering for use with optional subwoofer
Unmatched accuracy in smaller production rooms
Balanced +4 dBu XLR and unbalanced -10 dBV RCA inputs
Convenient front-panel volume control and power switch
Magnetically shielded for use near CRT monitors
THX pm3 approved for use in demanding production applications
The LSR6312SP powered subwoofer:
Multiformat powered subwoofer
Handling for Dolby Prologic, AC-3, DTS and other surround formats
RMC Room Mode Correction controls response peaks due to room space
RMC Calibration Kit included
250W continuous output power amplifier
Sophisticated LCR bass management system
Direct LFE input with selectable 10dB input sensitivity
Summed output allows chaining of multiple units
Neodymium Differential Drive NDD technology
Dynamic braking for extended LF response and low power compression
High-density baffle for low resonance and stable inertial ground
Linear Dynamics Aperture port design eliminates port turbulence and reduces port compression
Reinforced enclosure and convenient mounting points for mounted installation