Flexible positioning with astounding accuracy.
The biamplified LSR6325P is based on a 5.25" high-excursion low frequency transducer powered by a 100W RMS amplifier and a 1" damped titanium-composite high frequency transducer powered by a 50W RMS amplifier. Housed in a cast aluminum enclosure with the dark graphite finish of the LSR6300 line, the LSR6325P produces very flat frequency response +1.5dB/-2dB 20kHz—70Hz with bass extension —10dB @ 48Hz and peak SPL of 109dB at 1 meter.
It includes innovative technologies to overcome problems in the room and optimize response at the mix position. Due to irregular off-axis response, a speaker that measures "flat" on-axis in an anechoic chamber may not produce flat response at the mix position. JBL's Linear Spatial Reference technology ensures that the mid and high-frequency content that reaches the mix position is also smooth and accurate. This is accomplished by engineering into the system a ±30° horizontal, and ±15° vertical, radiated response. Using LSR technology, the mid and high-frequency response is flatter at the mix position, regardless of working distance.
To correct frequency response and overcome spectral shift when the system is mounted on a wall, in a corner, or on a work surface, a boundary compensation setting is included in LSR6325P.
When used in conjunction with the LSR6312SP Subwoofer and its integrated JBL RMC Room Mode Correction system, a LSR6325P system produces exceptional accuracy at the mix position from 20kHz to below 30Hz.
To meet the requirements of a broad range of recording and broadcast applications, the LSR6325P includes balanced +4 dBu XLR and unbalanced -10 dBV RCA inputs, user settings, and a convenient front-panel volume control and power switch. To optimize positioning in stereo and multichannel production rooms, the LSR6325P includes mounting points for use with readily available mounting brackets. The system is magnetically shielded for use near CRT monitors and is THX pm3 approved for use in demanding production applications.
