Skip to main content

Isp Technologies Bass Vector Passive Cabinet

Item #: 
127474181739071384
  • Write a Review

Tired of the limited performance of your 4x10 bass cabinet? ISP Technologies has taken a different approach to the modern bass guitar speaker system with the Bass Vector Speaker Cab. Combining the low... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Recommended Products
Overview

Tired of the limited performance of your 4x10 bass cabinet? ISP Technologies has taken a different approach to the modern bass guitar speaker system with the Bass Vector Speaker Cab. Combining the low-frequency extension that only an 18" driver can achieve with the natural, extended (but not brittle) highs of dual 8" drivers, the Bass Vector cabinet achieves a balance of depth, impact, and definition that makes 4x10s sound lifeless by comparison. At low frequencies, a single Bass Vector exceeds the output of a typical 4x10 cabinet by 4dB or more at 40Hz.

The high performance 18" driver is complemented by an advanced cabinet design featuring optimum volume and a large, deep tuned port. This helps to minimize the non-linear behavior and reduced low-frequency output that small ports produce. The cabinet is tour-grade, with Baltic birch plywood construction, dadoed joints, extremely durable rubberized polyurethane finish, metal handles, and casters.

FEATURES

  • High-performance bass guitar cabinet with one 18-inch woofer and dual 8" midrange drivers in line array topology.
  • Exceeds the performance of typical 4x10 cabinets by 4dB or more at 40Hz at high volumes
SPECIFICATIONS
  • LF Driver: 1 x 18 inch, large excursion, 650 watt rms.
  • HF Drivers: 2 x 8 inch, high sensitivity, 250 watt rms total.
  • Sensitivity: 98 dB @ 100 Hz, 102 dB @ 1KHz (1 Watt at 1 meter).
  • SPL: 126 dB at 1 meter, long term. 130 dB at 1 meter, peak.
  • Frequency Range: 29 Hz to 5 KHz (-10 dB).
  • Freq. Response: 39 Hz to 4 KHz (+- 3 dB).
  • Amplifier Power: 1000 W rms, high current DCAT, fan cooled.
  • Power Required: 5 Amps x 120 VAC typical, 10 Amps max.
  • Construction: Baltic Birch Plywood, extensively braced.
  • Finish: Rubberized Polyurethane.
  • Dimensions: 30" W x 21.25" H x 24" D (without casters).
  • Weight: Active: 125 Lbs., Passive: 110 Lbs.
  • Customer Reviews
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.