[[KeywordSearchInputContent]]

Free Shipping to store or home

Item # J00700

Print this page

  1. Select the information you'd like to print out.
  2. Cancel
Heritage Audio 1073 Module
Use Add to Cart below to have it shipped to you, or to a store near you.
Close
  • Store
  • Availability
Guaranteed Lowest Price
Pickup In Store
GC Shopping Cart
 Cart Contents
Qty Description Price Shipping Subtotal 
      Heritage Audio 1073 Module (J00700)
Availability:  


Accurate recreation of a legend.

The name says it all. First introduced by Neve in 1970 it has been reproduced by many others since then, most notably BAE Audio and AMS-Neve. Heritage Audio is proud to introduce what is quite possibly the most historically accurate reproduction ever made. Using the same exact components, specifications and, equally important, same time consuming construction techniques, the Heritage Audio 1073 looks and sounds as good as a Rupert Neve era 1073 module, and will last as long.

Heritage Audio 1073 Module Features:

  • 80dB Class A Microphone preamplifier
    High gain positions show a higher impedance, ideal for old ribbon mics
    10dB Class A Line Amplifier, Bridging input impedance, balanced and floating
    Class A, single ended, 2N3055 driven high headroom output stage
    EQ Button: Switches the equalizer on or off
    Phase Button: Flips phase 180ยบ
    1073 Module available. 19" Convertible format available Spring 2012


Heritage Audio 1073 Module Specifications:

  • High Frequency: +/-16dB shelving at 12 kHz, Baxandall type
    Low Frequency: +/-16dB with selectable frequency shelving of 35Hz, 60Hz, 110Hz & 220Hz ,Baxandall type
    Mid Frequency: +/-18dB peaking, fixed 'Q' , selectable center frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz , and 7.2kHz , dual inductor based
    High Pass Filter: 18dB per octave slope, switchable between 50Hz, 80Hz , 160 Hz & 300Hz, inductor based.
    Microphone input impedance: HI, 1200 Ohm minimum, LO, 300 Ohm minimum. Higher gain positions gradually have greater impedances, optimum for lo gain ribbon mics. Input is transformer balanced and floating.
    Line input impedance: 10KOhms bridging, transformer balanced and floating.
    Output impedance: Less than 75 Ohms, transformer balanced and floating, to drive a load of 600 Ohms.
    Maximum output: Greater than +26dBm into 600 Ohms, greater than +32dBu into 10KOhms.
    THD: Less than 0.025% at 1Khz, Less than 0.05% at 100Hz.
    Frequency response :20Hz (+0.3dB) to 20Khz (-0.2dB).
    Maximum Gain: Slightly greater than 80dB.
    Noise: Less than -100dBm.
    Power consumption: 106 mA @24VDC.


Voice your opinion! Be the first to review »
Questions about the 1073 Module (J00700)


To: GuitarCenter.com
PO Box 4769
Westlake Village, CA 91359
USA
866-498-7882
 
Order #: (if applicable)  * Denotes Required Field
*First Name:
*Last Name:
*Email:
Phone:
*Subject:
*Message:
Click to add file attachment
File Upload 5mb limit