2-channel preamp featuring Grace Designs renowned audiophile transparency.
The Grace Design m201 Microphone Preamp delivers unmatched audio performance, with massive headroom, ultra-wide bandwidth and a very open, musical character. The signal path has been hot-rodded to be fully balanced from start to finish, resulting in a wider dynamic range, while high-current output drivers enable even longer cable runs without signal loss. The rackmountable m201 mic preamp translates a sonic picture of astonishing clarity and detail, which serves to capture the essential character of the music being recorded.
A ribbon mic mode is now included, which shifts the gain range up 10dB while deactivating 48V phantom power, bypassing the decoupling capacitors and optimizing the input impedance. Each channel has an 'input mode' rotary switch which selects between a standard 48V phantom input, ribbon mic mode, a front panel DI input or optional DPA high voltage inputs (130V or 190V).
Included is a M + S (mid side) decoder circuitry with a built-in width control. The front panel width control is wired with a precision 12 position rotary switch which provides a range from 100% mid (mono) to 30% mid / 70% side. The ultra-precision summing and difference amplifiers feed a set of dedicated outputs, which allows simultaneous recording of discrete mid and side signals as well as the stereo matrix.
The front panel mounted HI-Z inputs are designed to accommodate a wide variety of high impedance input sources, making the m201 preamplifier an excellent choice as a DI box which will flawlessly preserve the sound of any plugged-in instrument. Imagine the same resolution and detail as Grace Design microphone preamplifiers available for DI recording situations.
Additionally, Grace Design will be offering the m201 with a state-of-the-art 24-bit/192kHz A/D converter option (retrofitable), rounding the m201 off as the ultimate transparent input solution for any recording facility.(Sold separately)
With our
Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!
Grace Design m201 Microphone Preamp Features:
- Redesigned, fully balanced, transformerless design
Dual parallel XLR outputs for each channel
Ribbon mic mode
Front panel DI / instrument inputs
DPA microphones 130V (190V) phantom power option
Built in M+S decoder with dedicated outputs and front panel width control
Optional reference quality 24-bit/192 kHz A/D converter section available late 2007
Precision 24 position gold contact rotary switch gain controls
Higher current outputs drive even longer cable runs
No electrolytic capacitors in the signal path
Sealed gold contact relays for all signal switching
Large two color, bi-phase LED peak indicator
Regulated linear power supply with custom wound toroidal transformer
Highest quality components used throughout
Five year warranty on parts and labor
Grace Design m201 Microphone Preamp Specifications:
- Frequency response: @ 40dB gain ±3dB 50ohms source - 4.5Hz-350KHz; @ 40dB gain ± 0.2dB 50ohms source - 18Hz-65KHz
THD+N: @ 20dB gain +20dBu out, 1kHz, <.0008%; @ 40dB gain +20dBu out, 1kHz, <.0009%; @ 60dB gain +20dBu out, 1kHz, <.0070%
Intermodulation distortion (@40dB gain +20dBu out): SMPTE/DIN 1:1 (50Hz, 7kHz), <.0020%; SMPTE/DIN 4:1 (50Hz, 7kHz), <.0030%
Noise - referred to input: @60dB gain 50ohms source , -130dB; @60dB gain; 150ohms source, -127dB; @60dB gain 600ohms source, -123dB
Phase deviation: 100-20KHz @40dB gain, <3 degrees
Crosstalk: Any Channel @40dB gain, 1kHz -125dB; Any Channel @40dB gain 10kHz, -115dB
CMRR: @60dB gain, 3.5Vcm, 1KHz - >70dB; @60dB gain, 3.5Vcm, 10KHz - >70dB
Phantom power: Voltage +48V+0.9/ -0.0
6.8kohms resistor match tolerance±0.1%
Maximum output level (1kHz, 100Kohms load): +28dBu
Impedance: Input, 8100ohms; Input, ribbon mode; 20Kohms; Output,190ohms
Dimensions (H x W x D): 2U x 19" x 10"
Weight: 16.5lbs (7.5kg)
Power consumption: 100-240VAC 50/60Hz - 20 Watts max
Grace Design m201 Microphone Preamp
5 year parts and labor warranty. Customer must mail-in copy of warranty card.
Get your gear covered!
Now you can get added warranty protection for your new gear. Pro Coverage steps
in where the manufacturer's "normal wear and tear" ends. Our PRO COVERAGE program
offers you UPGRADED COVERAGE if your product ever fails!
Pro Coverage includes:
- Accidental damage protection (new gear only)
- Expedited Repair
- Free Shipping (for returns or repairs)
- 100% Coverage for Commercial Use
- Extended Return Period
- Extended Price Protection
- No Lemon Guarantee
- Free Transfer of Coverage to a new owner
- Repair Costs Covered for up to 3 years from date of purchase
- Repairs Can Be Authorized Toll-Free by Phone or the via the web
